IAN 77436 - Fontaine de table MELINERA - Free user manual and instructions

USER MANUAL IAN 77436 MELINERA

Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

GB CY

Slate table Fountain

Assembly, operating and safety instructions

GR CY

Συντριβάνιδωμάτιου

Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

GB / CY Assembly, operating and safety instructions Page 3

Color palette bar with grayscale swatches and a central crosshair symbol (no text or labels)

Proper use......Page 4

Description of parts......Page 4

Technical data Page 5

Safety notes Page 5

Before first use....Page 8

Preparing for use / Use

Assembly......Page 8

Switching the tabletop fountain on and off....Page 9

Changing the distilled water....Page 9

Replacing the bulb....Page 10

Maintenance / Cleaning / Care ......Page 10

Disposal Page 11

Color palette bar with grayscale gradient and a central crosshair symbol (no text or labels)

Slate Table Fountain

●Properuse

The tabletop fountain is intended for use in a domestic indoor environment only. The product is solely intended for private and not for commercial use.

● Description of parts

1	Lamp attachment assembly
2	Ornamental stone (made of synthetic resin)
3	Holes for lamp attachment
4	Lamp attachment
5	Screws (for lamp attachment)
6	Base
7	Connection hose
8	Pump
9	Drainage hole
10	Power supply cord
11	Adapter
12	Water container
13	Pebbles
14	+ / - switch ("Water flow control")
15	Connection piece
16	Recess
17	Screws
18	Halogen bulb

●Technicaldata

Tabletop fountain:

Dimensions: Model Z31300-BS, Z30094D-BS:

approx. 19 x 41 x 9.5 cm (W x H x D)

Max. capacity: approx. 800 ml

Max. temperature of the

pumped liquid: 35 °C

Weight (empty): 1.7kg

Input voltage: 230-240V\~, 50Hz, 10W

Halogen bulb: MR11, 1 x max. 5 W

Protection class:

Adapter:

Model: BBA41B-12-0650

Input voltage: 230-240V\~, 50Hz

Output voltage: 12 V\~, 650 mA, 7.8 VA

Protection class:

The mains adapter (Model No. BBA41B-12-0650) is TÜV tested.

Safety notes

Children should be kept away from the product at all times. This is not a toy.

Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device.

This device is not a toy and should not be played with by children. Children are not able to understand the dangers that can occur when handling this device.

CAUTION! RISK OF INJURY! Ensure that all parts are undamaged and have been assembled appropriately. Risk of injury exists if assembled incorrectly. Damaged parts can effect safety and function.

■ Make sure that the product is only assembled by competent persons.
■ Do not use the device / product if it is damaged.
- Check all accessories and materials regularly for rust, wear and / or other damage. Do not use the product if it is rusty, worn or otherwise damaged.
Place the product onto a flat and level surface. Otherwise the product may topple over. This could result in injuries and / or damage to the product.
■ Use the tabletop fountain only in conjunction with the supplied accessories.
■ The tabletop fountain is suitable for use indoors only.
■ Use the pump 8 only in conjunction with the supplied adapter 11 otherwise damage to the product may occur.
■ Use the pump 8 only if it is fully covered with water. Failure to observe this advice may result the pump 8 overheating and damage to the product.
■ Ensure that the water is free of foreign objects that could be sucked into the pump 8, otherwise damage to the product may occur.
- Operate the tabletop fountain with distilled water only. Do not add any additives such as aromatic oils or similar substances, as they could ignite and result in injury and / or damage.
Fit the light so that it is at least 0.3 m away from the material illuminated.

Avoid putting your life at risk from electric shock!

Before using the device, make sure that power supply available corresponds to the required operating voltage of the adapter supplied.
Before connecting the product to the mains, always check the device, the pump 8 and the adapter 11 for any possible damage.
A damaged device represents the danger of death from electric shock.
Please consult a specialist electrician if you discover any damage or problems with the device, or for the performance of repairs to the device.
■ Never open any of the electrical equipment or insert any objects into it. Such interventions represent the danger of death from electric shock.
■ Never touch the mains plug 11 with damp or wet hands.
■ Ensure that the adapter 11 never comes into contact with water or other liquids.
Do not misuse the power cable by using it to carry or hang up the pump 8 or to pull the adapter 11 out of the socket. Keep the power cable away from heat, oil, sharp edges or moving parts. Damaged or tangled power cables increase the risk of electric shock.
■ Dispose of the pump 8 when the power cables of the pump 8 are damaged! The power cables of the pump 8 cannot be replaced.
■ Position the device and all electrical installations and connections in such a way that the location cannot be flooded. All electrical connections and installations must be located in the area that is safe from flooding.
■ Make sure that the adapter 11 is protected from water splashes.

■ Only carry out work on the device when the adapter 11 has been disconnected from the mains current.
■ Never run the pump 8 without water.

Before first use

☐ Select a suitable location for the tabletop fountain.
☐ Ensure that the supporting surface is solid, flat and even.

CAUTION! If the supporting surface is uneven, the assembled and water-filled tabletop fountain could overturn, resulting in injury and / or damage to the product.

CAUTION! Risk of fire if the halogen bulb 18 falls over.
CAUTION! RISK OF INJURY! Never try to move the tabletop fountain if it is filled with distilled water. This could result in injury or damage to property.

● Preparing for use / Use

Assembly

□ Unpack the product and the accessories carefully. Note: When you are unpacking the components make sure that you do not unintentionally throw away any of the assembly materials.
Place the water container 12 on a flat and even supporting surface near a mains socket (230-240 V\~, 50 Hz).
□ Mount the lamp attachment assembly 1 on to the ornamental stone 2. To do this, position the lamp attachment 4 exactly over the holes for the lamp attachment 3 and fix it firmly in place by screwing in the screws 5 (see Figure A). Use a PH1 screwdriver to tighten the screws.

☐ Fill the water container 12 with water up to the MAX marking (inside wall) of the water container 12.
☐ Increase (MAX) or reduce (MIN) the flow of water issuing from the ornamental stone 2 by means the + / - slider 14 (Fig. C).
Place the base 6 with the attached pump 8 on the water container 12 and guide the lead from the pump 8 through the recess 16.
□ Decorate the base 6 with the pebbles 13.
☐ Your tabletop fountain is now ready for use.

- Switching the tabletop fountain on and off

☐ Insert the adapter 11 into a properly installed mains socket to switch the tabletop fountain on. The lamp halogen bulb 18 illuminates and water flows out of the ornamental stone 2.

Note: Brush your hand across the water outlet in the ornamental stone 2 to ensure that the water flows evenly out of the ornamental stone.

☐ Pull the adapter 11 out of the socket to switch off the tabletop fountain.

● Changing the distilled water

WARNING! RISK OF LOSS OF LIFE BY ELECTRIC SHOCK!

Ensure that the adapter 11 does not fall into the water or come into contact with water.

Note: To prevent algae from forming, change the water at regular intervals - at least 1 x per week - and clean the water container [12]

WARNING! RISK OF LOSS OF LIFE BY ELECTRIC SHOCK!

Pull the adapter 11 out of the socket.

☐ Remove the base 6 together with ornamental stone 2 from the water container 12.
☐ Pull the connection hose 7 from the connection piece 15.
Place the base 6 together with the ornamental stone 2 lamp attachment assembly 1 and pump 8 carefully to one side.
☐ Pour the water carefully out of the drainage hole 9. Clean the water container 12 with a soft cloth (or similar) and a little cleaning agent, if necessary. Remove limescale deposits from the water container 12 when required using an ordinary limescale remover.
☐ Fill the water container 12 with fresh water up to the MAX marking (inside wall) of the water container.
☐ Reassemble the tabletop fountain (see "Assembly").

● Replacing the bulb

WARNING! RISK TO LIFE FROM ELECTRIC SHOCK!

Pull the adapter 11 out of the mains socket before performing any tasks on the product.

☐ Release the screws 17 on the lamp attachment assembly 1 using a screwdriver (see Figure B).
☐ Take off the halogen bulb 18. Insert a new halogen bulb 18 (see Figure B).
☐ Retighten the screws 17 using a screwdriver.

● Maintenance / Cleaning / Care

WARNING! DANGER TO LIFE FROM ELEC-

TRIC SHOCK! Before doing any work on the product, pull the adapter 11 out of the socket.

☐ Ensure that the water level never drops below the MIN marking (inside) wall of water container 12.

Fill up or change "distilled" water when the water level is below the MIN mark (see "Changing the water"). Check the water level by slightly raising the base 6. If no water flows from the ornamental stone 2, and the mains adapter 11 is connected to a mains socket, then the water level is probably too low.
☐ Change the "distilled" water at least once a week (see "Changing the water"). This will prevent algae from forming.
☐ Check and clean the tabletop fountain, pebbles 13 water container 12 and pump 8 at regular intervals. Never use aggressive or corrosive cleaning agents to do this. Ensure that no foreign bodies can enter the pump 8 or the connection hose 7.
☐ Pour out the water and allow the tabletop fountain to dry completely if you are going to leave it unused for an extended period (see "Changing the distilled water").

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

EMC CE

Color palette bar with grayscale gradient and a central crosshair symbol (no text or labels)

Z31300-BS Z30094D-BS

B

17 17 1 18

C

MAX MIN

Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

IAN 77436

OWIM GmbH & Co. KG

Stiftsbergstraße 1

D-74167 Neckarsulm

Model No.: Z31300-BS / Z30094D-BS

Version: 09/2012

© by ORFGEN Marketing

Z31300-BS/Z30094D-BS072012-GB/CY

GB CY