TTV-29N02 - Television TELEFUNKEN - Free user manual and instructions

Product Type	Television (CRT)
Brand	Telefunken
Model	TTV-29N02
Screen Size	68 cm (29 inches) diagonal
Display Technology	CRT (Picture Tube)
Receiving System	B/G
Color System	PAL / NTSC Playback
Power Supply	AC 220-240 V, 50/60 Hz
Power Consumption	150 W max
Standby Power Consumption	5 W max
Dimensions (W x D x H)	810 x 500 x 595 mm
Net Weight	36.5 kg
Remote Control Type	Infrared
Remote Control Batteries	2 x AAA (1.5 V each)
Speakers	8 Ohm, 12 W x 2
Audio Output (Max)	6 W x 2 at 1 kHz, 0.5 Vrms, 10% THD
Input Terminals	Side AV-In, S-Video, AV In1, YUV (Y, Cb, Cr)
Output Terminals	AV Out
Safety Warnings	High voltage inside; do not remove back cover. Avoid rain/moisture. Unplug during storms.
Cleaning Instructions	Unplug power cord, wipe with dry soft cloth.
Operating Conditions	Indoor use; avoid direct sunlight, heat sources; allow ventilation.

Frequently Asked Questions - TTV-29N02 TELEFUNKEN

How do I connect external devices like a DVD player?

Use the Side AV-In (yellow for video, white/red for audio) or S-Video input. For component video, use the YUV (Y, Cb, Cr) inputs. Press the AV/TV button to select the input source. Do not connect AV IN 1 (VIDEO) and S-VIDEO simultaneously.

What should I do if there is no picture or sound?

Check if the power cord is plugged in and the main power switch is ON. Ensure the remote control batteries are installed correctly. Verify antenna connection. Press any number button or program up/down to wake the TV from standby. If still no picture, refer to the service tips chart in the manual.

How do I set up the sleep timer?

Press the SLEEP button on the remote repeatedly to set the timer from 10 minutes up to 3 hours in 10-minute steps. When the time reaches 0, the TV will automatically switch to standby.

Why is the picture snowy or weak?

Snowy picture indicates weak TV signals. Try adjusting the antenna position or use an antenna amplifier. Also check for interference like nearby short-wave radio equipment. Refer to the 'Causes of Interference' section in the manual.

How do I change the on-screen display language?

Press MENU and navigate to SETUP. Select LANGUAGE using PROG +/- buttons, then adjust with VOL +/- to choose your desired language.

What does the Child Lock function do?

When CHILD LOCK is set to ON in the SETUP menu, the buttons on the TV itself become disabled. The TV can only be operated via the remote control.

How do I perform an automatic channel search?

Press MENU and select TUNE. Navigate to AUTO SEARCH using PROG +/- and press VOL +/- to start. The TV will automatically scan all bands and store available channels.

The remote control is not working. What should I check?

First, check if the batteries are exhausted (replace with new alkaline batteries). Ensure the batteries are inserted with correct polarity. Remove any obstacles between remote and TV sensor. If still not working, try resetting the TV by unplugging for a few minutes.

Can I use this TV with a digital set-top box?

Yes, connect the digital set-top box to the TV via the Side AV-In or YUV inputs. Select the corresponding AV input using the AV/TV button. The TV is analog, so it will display the signal from the set-top box.

How do I clean the TV screen and cabinet?

Always unplug the power cord before cleaning. Use a dry soft cloth to wipe the screen and cabinet. Do not use any liquids or abrasive cleaners. Never spray anything directly on the TV.

USER MANUAL TTV-29N02 TELEFUNKEN

Front view of a white telefunken TV with control buttons and a black screen (no visible text or symbols on the screen itself)

MODEL TTV-29N02

INSTRUCTIONS FOR USE AND CARE

Remarks:

Customer please confirm all the artwork within 2-3 days. After your confirmation, the factory needs 10-15 days to complete the production. Please be noted that late artwork confirmation will cause shipment delay accordingly.

Skyworth Multimedia International Co., Ltd

Description: MANUAL(5P60)
Job No. 48105 TELE	FJNKEN
Ref: 29N03	P/No.
REV:2	Scale:
Engineering Dept:
Artwork By: Date: 2004-08-18
Checked By: Date:
Approved By: Date:

SPECIFICATIONS

Receiving System : B/G

Colour System : PAL / NTSC Playback

Picture Tube : 68cm (29") diagonal

Ext. Antenna : 75 Ohm Coaxial Cable

Ext. In/Out : Side AV-In, S-Video

Audio/video -in/out,

Speaker : 8

Ohm(12W) x2

Audio Output(MAX)

: 1KHZ 0.5Vrms, 6Wx2

10% THD Audio Output Power

: 1KHZ 0.5Vrms, 6Wx2

Power Consumption : AC 220-240V 50/60Hz, 150W MAX

Standby Power Consumption

: AC 220V 50/60Hz, 5W MAX

Dimension : 810(W) x 500(D) x 595(H)mm

Net Weight : 36.5 kg

REMOTE CONTROL

Transmitting System : Infrared

Power Supply : DC 3V (1.5 x 2)

Dimension : 28(W) x 155(L) x 45(D)mm

Net Weight : 83 g

Design and specifications are subject to change without prior notice.

CONTENTS

INTRODUCTION.... 2

WARNINGS and CAUTIONS 3 - 4

CONTROL LOCATION 5

INPUT and OUTPUT 6

OPERATION INSTRUCTIONS 7-10

LOCATION OF CONTROL(REMOTE CONTROL UNIT) 11-13

BATTERY INSTALLATION.... 14

SERVICE TIPS 15

INTRODUCTION

Thank you for purchasing this television. To get the most out of this unit please carefully read the instructions and keep them in a safe place for future reference.

INSTALLATION

• Locate the receiver in the room where direct light does not strike the screen.
  Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
• Allow enough space between the receiver and the wall to permit ventilation.
• Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
• This TV receiver can be connected to AC 220-240 Volts. 50/60 Hz. Never connect to DC supply or any other power supply.
• Do not install the receiver in a location near heat sources such as radiator, air ducts, direct sunlight, or in a place somewhere like close compartment and close area.
• Do not cover the ventilation openings when using the set.

CAUTION

Never tamper with any components inside your set, or any other adjustment controls not mentioned in this manual. All television receivers are high voltage instruments. Your PICTURE TUBE is highly evacuated. Scratching, chipping or undue pressure is dangerous and should be avoided. To clean, the power cord should be pulled out from the plug receptacle, then wipe the receiver with a dry soft cloth. During thunder and lightning storms, unplug the power cord and antenna cord to prevent your TV set from damage.

WARNINGS and CAUTIONS

Illustration of a computer monitor with wireless signal lines and a crossed-out cable (no text or symbols)

Warning

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

Simple line drawing of a box with a 'X' symbol crossed out, next to a rope tied to a bag (no text or symbols)

Warning

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Simple line drawing of a microwave oven with a hand holding a tray and a cross symbol (no text or labels)

Warning

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Caution

If the television is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

WARNINGS and CAUTIONS

Never stand on, lean on or push suddenly the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.

Illustration of a person running with a megaphone emitting sound waves from a TV (no text or symbols present)

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight or other sources of the heat. Do not stand the television receiver on other products which give off heat, eg. video cassette player, audio amplifier.

Simple line drawing of a box with a crossed-out black X symbol (no text or labels)

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical component.

Do not squash power supply cord under the television receiver.

CONTROL LOCATION

1. Main Switch
2. Remote Sensor
3. Power Indicator
4. Program Down/Up Button
5. Volume Down / Up Button
6. Menu Button
7. AV/TV Button
8. Speakers
9. Side AV In
10. YUV(Y, Cb, Cr) In
11. S-Video In
12. AV In1
13. AV Out
14. AC Power Cord
15. Antenna Input Socket (75 Ohm)

INPUT AND OUTPUT TERMINALS

Technical line drawing of a mechanical or architectural component with internal structure and no visible text or symbols

It can be connected to the following appliances: video-tape recorder, video camera, tape recorder and audio amplifier, etc.....

*Please keep AC cord unplugged when connecting TV system.

*Do not Connect AV IN 1(VIDEO) and S-VIDEO at the same time.

OPERATION INSTRUCTIONS

WARNING: The main power switch (No. the control location page) is the manually operated mechanical switch. The remote control can not cut off power supply to the TV set. For safety purpose, push main switch to the OFF position and make sure the power indicator goes out when not use for long time. Push the power "ON/OFF" switch to the ON position, and then power indicator will light up, the picture (or blue screen) will appear within a few seconds.

MENU BUTTON

1. Press this button to select PICTURESOUNDTIMESETUPTUNEEXCHANGE menu cyclically.

1. After entering into each menu, you can select submenu which you will adjust with PROG. +/- Buttons or (GREEN)/(BLUE) buttons. Then you can adjust it with VOL. +/- Buttons or the (RED)/(YELLOW).

Picture Button

PICTURE
CONTRAST	75
BRIGHTNESS	48
COLOUR	48
SHARPNESS	75
HUE	0
BLACK STRETCH	OFF
TILT	0
COMB FILTER	ON

Sound Button

*HUE is displayed only for NTSC system.

*TILT and COMB FILTER item is optional.

*TILT is for GEOMAGNETISM, You can change the TILT to move picture to a better position.

*When you set comb-filter ON ,the image quality will be improved sharply.

*Comb-filter cannot be set ON when no colour or in S-VIDEO mode.

1. You can select the

VOLUME.BASS.TREBLE.BALANCE.TRUBASS.SURROUND item with the PROG+/- buttons or the (GREEN) / (BLUE) buttons.

1. You can adjust VOLUME.BASS.TREBLE item with VOL+/- buttons or (RED) / (YELLOW) buttons.

2. You can turn the TRUBASS.SURROUND item ON or OFF with VOL+/- buttons or (RED) / (YELLOW) buttons.

*TRUBASS item is optional.

*TRUBASS technology is incorporated under license from SRS Labs, Inc.

OPERATION INSTRUCTIONS

TIMERS

Select hour or minute with PROG+/- buttons or (GREEN) / (BLUE)

buttons

Adjust CLOCK time with VOL+/- buttons or (RED) / (YELLOW) buttons You can press CLOCK buttons to display currently clock time.

2.ON TIME

Select hour or minute with PROG +/- buttons or (GREEN) / (BLUE)

buttons.

Adjust ON TIME with Vol+/- buttons (RED) / (YELLOW) buttons.

3.ON PROG.

Select ON PROGRAM with VOL+or (RED) buttons.

4.OFF TIMER

Select hour or minute with PROG+/- buttons or (GREEN) / (BLUE) buttons.

Adjust REMIND time with VOL+/- buttons or (RED) /(YELLOW) buttons

5.SLEEP TIMER

Set SLEEP TIME with VOL+/- buttons or (RED)/(YELLOW) buttons.

6.REMINDER TIMER

Select hour or minute with PROG+/- buttons or (GREEN)/(BLUE)

buttons.

Adjust REMIND TIME with VOL+/- buttons or (RED)/(YELLOW) buttons.

7.REMIND PROG

Select REMIND PROGRAM with VOL+/- buttons or (RED)/(YELLOW) buttons.

* Timer function will need resetting when you switch off the TV set by the main power switch or unplug the power cord.

OPERATION INSTRUCTIONS

SETUP Button

You can select the item by pressing PROG 1/- buttons or (GREEN)/(BLUE) Buttons.

then you can adjust it by Vol +/- buttons or (RED)/(YELLOW) buttons.

1. LANGUAGE

You can select the on-screen display language.

2.BACK GROUND

Press VOL+/- buttons or (RED) / (YELLOW) buttons to set it ON or OFF. For BACKGROUND, only when no signal is input in TV mode.

1. NOISE REDUCE

Press VOL+/- buttons or (RED) / (YELLOW) buttons to set it ON or OFF. For Noise REDUCE, only in TV mode.

4.CHILD LOCK

Press VOL +/- buttons or (RED) / (YELLOW) buttons to set it ON or OFF. If you set it ON, the key on the TV set is disable and only the remote control functions.

5.CALENDAR

Press VOL+/- buttons or (RED) / (YELLOW) buttons to enter into CALENDAR menu.

* CALENDAR item is optional. Please see actual TV set.

CALENDAR

1. Press VOL 1 / - buttons or (RED) / (YELLOW) buttons to select YEAR, MONTH or DATE.
2. Press PROG +/- buttons or (GREEN) / (BLUE) buttons to adjust YEAR, MONTH or DATE.
3. Press MENU Button to return.

OPERATION INSTRUCTIONS

TUNE MENU

You can select the item by press the PROG+/- buttons or the (GREEN) / (BLUE) buttons, move to the menu you select and then do as follows.

1.COLOUR SYS

Press VOL+/- buttons or (RED) / (YELLOW) buttons to set the colour System. Australia is PAL B/G.

2.SOUND SYS

Press VOL+/- buttons or (RED) / (YELLOW) buttons to set the sound system. Australia is 5.5M.

3.BAND

Press VOL+/- buttons or (RED) / (YELLOW) buttons. You can select the Band VHF-L.VHF-H or UHF.

4.SKIP

Press VOL +/- buttons or (RED) / (YELLOW) buttons to set skip on or off, when you set skip on. This program will be hidden.

5.PROGRAM

Press VOL+/- buttons or (RED)/(YELLOW) buttons to set the PROGRAM number.

6.FINE TUNE

For better quality with VOL+/- buttons or (RED) / (YELLOW) buttons.

7.SEARCH

Press VOL+/- buttons or (RED) / (YELLOW) buttons to search for next or previous available program, the set will automatically stop while the signal is received.

1. AUTO SEARCH

Press VOL +/- buttons or (RED) / (YELLOW) buttons, the TV set will automatically search in 3 bands and store every program.

EXCHANGE MENU

*In AV mode, only COLOUR SYS displayed under this menu.

*After fine tune. The colour of program number will change from GREEN to YELLOW.

In AV mode, this item will not be displayed.

Select the item by pressing the PROG+/- buttons or the (GREEN)/(BLUE) buttons.

1.PROGRAM 1

Press VOL +/- buttons or (RED) / (YELLOW) buttons to adjust PROGRAM 1.

2.PROGRAM 2

Press VOL+/- buttons or (RED) / (YELLOW) buttons to adjust PROGRAM 2.

1. Press VOL+/- buttons or (RED) / (YELLOW) buttons to exchange

PROGRAM 1 and PROGRAM 2.

LOCATION OF CONTROL (REMOTE HANDSET UNIT)

STAND BY BUTTON()

Press this button to turn the TV on/off. Press any Number Button or Program Up/Down Button, picture and sound will appear on within a few seconds.

SLEEP BUTTON(②)

This key is used to set the sleep timer from in 10 minutes step up to three hours. When the preset time runs to 0, the TV set will go into standby mode.

*If no program received, the TV set will switch to standby automatically in 5 minutes.

SOUND SYSTEM BUTTON (SYS.)

When the sound system is incorrect, press this button to select the correct sound system.

STEREO/MONO DUAL CH I/II

BUTTON(I/II)(OPTION)

The third line on the top right corner of the screen automatically changes to green when a NICAM broadcast is received.

As stereo program is received. You can select STEREO. MONO. or FM by pressing the ST/MO/I/II button. As bilingual program is received. You can select DUAL-

1, DUAL-2 or FM by pressing the ST/MO/I/II button.

Remark: FM: Standard mode STEREO: Stereo

mode MONO: Mono mode

DUAL-1: multi sound channel for language 1

DUAL-2: multi sound channel for language 2

PROGRAM UP/DOWN BUTTON (PROG. +/-)

Press the Program Up Button to select the program forwards.

Press the Program Down Button to select the program backwards.

LOCATION OF CONTROL (REMOTE HANDSET UNIT)

VOLUME UP/DOWN BUTTONS (VOL.+/-)

Press Volume Up/Down Buttons to adjust sound level.

PROGRAM SELECTION BUTTONS(0-9)

Push the number for your desired program and the program indicator will be displayed on the screen.

Press number key 0-199 for program selection.

MUTE BUTTON(☐)

Press once to mute the sound, press again to return to previously set sound level. MENU RECALL BUTTON.

MENU RECALL BUTTON☐+)

Press this button sequential to recall for the program number, system, logo etc on the screen.

SOUND MODE BUTTON(S.M.)

Press this button to select the desired sound mode, USER. SPEECH. THEATER can be MUSIC selected cyclically.

PICTURE MODE BUTTON(P.M.)

Press this button to select the desired picture mode, RICH. USER. SOFT and STANDARD can be selected cyclically.

DIGIT BUTTON(--/--)

Press this button to select program between 0-199 program.

To select a one-digit number: press "--/---" button to display "-", then press 0-9 to select a number 0-9, or press the number 0-9 directly.

To select a two-digit number: press "--" button to display "--". then press 0-9 to select a number 10-99.

To select a three-digit number: press "--/---" button to display "1--". then press 0-9 to select a number 100-199.

*Both of the sound mode"SPEECH,MUSIC, THEATER" or picture mode "RICH, SOFT, STANDARD" are fixed by factory, all the change of these settings will be saved into the" USER'mode automatically.

MENU BUTTON(MENU/INDEX)

In TV mode, this button is used as MENU command.

MENU: To use MENU button for the turning procedure, please refer to page 7-10 for the details.

INDEX: Press INDEX button to obtain the index page.

AV MODE BUTTON (AV/TV)

In TV mode, used as AV command.

AV: Press this button to display external video signal such as VCR or CD video player.

LOCATION OF CONTROL (REMOTE HANDSET UNIT)

In TV mode, used as SOUND menu command.

SOUND: Press this button to enter into the SOUND menu directly.

RECALL : Sometimes the answers of quizzes, jokes etc are hidden. Press REVEAL button to reveal the hidden information.

PICTURE MENU BUTTON(PICTURE/SIZE)

In TV mode, used as PICTURE menu command.

PICTURE: Press this button to enter into the PICTURE menu directly.

SIZE: The top or bottom half of any page can be enlarged by pressing this button.

SETUP MENU BUTTON(SETUP/HOLD)

In TV mode, used as SETUP menu command.

SETUP: Press SETUP button to enter into the setup menu directly.

HOLD: Sub-pages will scroll automatically. Press HOLD button a hold a sub-page. To release the page.

Press HOLD again.

TUNE MENU BUTTON(TUNE)

In TV mode, used as TUNE menu command.

TUNE: Press this button to enter into the TUNE menu directly.

GAME BUTTON(GAME)

In TV mode, used as GAME command.

GAME: You can play the game on TV. To speed up with PROG - , transform with PROG + .Shift left with

VOL-, shift right with VOL+.

CLOCK BUTTON(CLOCK)

In TV mode, used as CLOCK command.

CLOCK: Display the time on the top right corner of the screen.

Q.VIEW BUTTON(Q.VIEW)

In TV mode, used as Q.VIEW command.

Q.VIEW: Press this button to return to the previously viewed program.

BATTERY INSTALLATION (REMOTE CONTROL UNIT)

1. Remove the battery cover.
2. Insert the 2 UM4-AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.
3. Replace the battery cover.

Replace with new batteries when the TV set begins to show the following symptoms:

Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.

Technical line drawings of two remote control devices with handle and mounting bracket (no text or symbols)

Remark:

1) Alkaline Batterie Recommended
2) Remove batteries when they are exhausted or if the remote control is not to be used for a long time.

THE CAUSES OF INTERFERENCE

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances which visibly affect your picture. Proper installation, a good aerial are your best safe-guards against these disturbances.

SNOW

Weak TV signals from long distant stations result in an unsteady picture and give the effect of falling snow. An antenna adjustment or antenna amplifier may be needed.

RF INTERFERENCE

Moving ripples across the screen are caused by nearby transmitting or receiving-short-wave radio equipment.

GHOST

Multiple image caused by TV signals reflected back from surrounding buildings, hills, aircraft, etc. is minimized by correct aerial positioning.

DIATHERMY

Herringbone pattern and partial picture loss can result from the operation of diathermy equipment from a nearby doctor's surgery or hospital.

CAR IGNITION

Nearby cars and electrical motors can cause small streaks across the picture or make the picture roll.

SERVICE TIPS

BEFORE CALLING FOR SERVICE, HAVE YOU CHECKED (☐) THE FOLLOWING CHART ON SYMPTOMS AND SOLUTIONS?

Symptoms

No picture, no sound

●

●

●

●

●

●

Poor sound, picture OK

●

●

●

●

●

Poor picture, sound OK

●

●

●

●

●

●

●

●

Weak picture

●

●

●

●

●

●

Blurred picture

●

●

●

●

●

Double image

●

●

●

●

●

Lines in picture

●

●

●

●

●

Distorted picture

●

●

●

●

●

Weak reception on some channels

●

●

●

●

●

●

●

Horizontal bars

●

●

●

Picture rolls vertically

●

●

●

●

●

Poor colour

●

●

●

●

●

●

●

●

●

●

No colour

●

●

●

●

●

●

●

●

Misoperation of Remote control

●

No Remote control

●

On Screen Display Control outside the screen

●

Australasia: SALES / DISTRIBUTION SOLELY BY:

Southern Africa: SALES / DISTRIBUTION SOLELY BY:

NU WORLD IND. (PTY) LTD

P.O. BOX 8964, JHB 2000

TEL:[phone]

SERVICE: MAXICARE (TOLL FREE No.) 0800 110 812

Prima Australasia PTY LTD

P.O.Box 326

Braeside

VIC 3195

Australia

Tel: [phone]

Country of Origin.: CHINA

SERVICE: 1300 366 144