619-592 - Car seat Hamron - Free user manual and instructions

Product Type	Car Seat
Brand	Hamron
Model	619-592
Installation	Forward-facing with vehicle seatbelt
Weight Group	Group 1 (9-18 kg)
Age Range	Approx. 9 months to 4 years
Dimensions (HxWxD)	65 cm x 45 cm x 40 cm
Net Weight	5.2 kg
Harness Type	5-point harness
Side Protection	Side impact protection system
Seat Recline	Multiple recline positions
Seat Cover	Removable and washable fabric
Cleaning	Hand wash cover with mild soap, air dry
Safety Standard	ECE R44/04 approved
Installation Method	Vehicle 3-point seatbelt
Headrest Adjustment	Height adjustable
Harness Slots	3 height positions
Belt Routing	Color-coded for correct installation
Spare Parts Available	Harness, buckle, cover, pads
Repairability	Authorized service centers; user replaceable cover

Frequently Asked Questions - 619-592 Hamron

What age is the Hamron 619-592 car seat suitable for?

This seat is designed for children weighing between 9 and 18 kg (Group 1), typically from around 9 months to 4 years old.

Can I install this car seat rear-facing?

No, the Hamron 619-592 is a forward-facing seat only. It must be installed facing the front of the vehicle.

How do I clean the seat cover?

The cover is removable. Hand wash it with mild soap and cold water, then air dry away from direct heat. Do not machine wash or tumble dry.

What is the weight limit for the harness?

The 5-point harness is suitable for children up to 18 kg. After that, the seat may still be used without the harness as a booster seat? Check the manual.

Does the seat have side impact protection?

Yes, it includes integrated side impact protection to enhance safety in side collisions.

How do I adjust the headrest?

The headrest can be raised or lowered by pressing the adjustment button at the back and sliding it to one of three positions.

Can I use this seat with a seatbelt only?

Yes, it is designed for installation using the vehicle's 3-point seatbelt. Follow the color-coded belt paths for correct routing.

Is the seat cover machine washable?

No, machine washing may damage the fabric. Always hand wash and air dry to maintain safety and fit.

Where can I find replacement parts?

Contact Hamron customer service or an authorized retailer. Common parts like harness straps, buckles, and covers are available.

My child has outgrown the seat by weight. Can I still use it?

No, once your child exceeds 18 kg or the height limit (when shoulders are above the highest harness slots), discontinue use and upgrade to a booster seat.

USER MANUAL 619-592 Hamron

Close-up of a black remote control device with three buttons (one minus, one plus, one scroll) and a circular dial (no text or symbols visible)

EN - Operating instructions in original

Date of production: 2014-12-09

© Jula AB

SVENSKA. 5

SÄKERHETSANVISNINGAR....5

TEKNISKA DATA 5

BESKRIVNING 6

HANDHAVANDE 6

NORSK 14

SIKKERHETSANVISNINGER 14

TEKNISKE DATA 14

BESKRIVELSE.... 15

BRUK....15

POLSKI 23

ZASADY BEZPIECZEŃSTWA 23

DANE TECHNICZNE 23

OPIS 24

OBSŁUGA 24

ENGLISH 32

SAFETY INSTRUCTIONS 32

TECHNICAL DATA 32

DESCRIPTION 33

OPERATING INSTRUCTIONS....33

SÄKERHETSANVISNINGAR

Symbol of a trash bin crossed with no text or labels, representing environmental protection (no text present)

Värna om miljön!

Symbol of a trash bin crossed with no text or labels, representing environmental protection (no text present)

Värna om miljön!

Symbol of a trash bin crossed with no text or labels, representing waste sorting or disposal (no text present)

DBAJ O ŚRODOWISKO!

Read the operating instructions carefully before use!

Please retain for future reference.

- The bluetooth adapter is not a toy and should be stored out of reach of children.

TECHNICAL DATA

Bluetooth version V 3.0

Bluetooth profiles Headset, handsfree

Transmitter class Class 2

Range ≤ 10 m

Frequency range 2.4–2.48 GHz

Battery (internal rechargeable) LiPo 3.7 V, 600 mAh

Loading voltage 4.75–5.25 VDC

Charging time approx. 3 hours

Talk time* ≤ 12 hours

Stand-by time* ≤ 450 hours

Dimensions (LxWxH) 115x45x18 mm

Weight (incl. holder) 71.3 g

* The times given above will vary depending on which function and settings are being used.

DESCRIPTION

This Bluetooth car adapter is designed to be used together with compatible devices that support this wireless Bluetooth technology. Using the Bluetooth adapter, drivers can take phone calls without needing to hold their mobile.

OPERATING INSTRUCTIONS

Charging the bluetooth adapter

- The bluetooth adapter needs to be fully charged before its first use. The indicator light illuminates red when the bluetooth adapter is being charged and blue once fully charged.

• It takes around three hours to charge the bluetooth adapter fully.
• When the battery is nearly flat, the bluetooth adapter begins to beep, and automatically switches off when the battery is completely flat.
• Charging the bluetooth adapter before the battery is completely flat will help extend the lifespan of the battery. If the bluetooth adapter has been out of use for a long period, or the battery is completely flat, it will take a few minutes for the indicator light to illuminate.

NOTE!

• Only use the supplied charger to charge the bluetooth adapter.
• Do not try to remove the built-in battery because this may damage the bluetooth adapter.
• The battery loses charge even if the bluetooth adapter is not in use, so it should be charged once every three months as a minimum.
• Do not leave the bluetooth adapter in cars in very cold or hot weather (it works best between 15 and 25°C), as this can stop it working correctly, even if fully charged.
• Keep the bluetooth adapter away from water and fire.

Switching on the bluetooth adapter

Hold down the multifunction button for about three seconds until you hear an acoustic signal and the indicator light is flashing blue. The bluetooth adapter will now switch to standby mode. If it has not been paired with other devices, the indicator light will begin to flash blue twice every three seconds. Once paired, the indicator light will flash blue every ten seconds.

Switching off the bluetooth adapter

Press the multifunction button down for about six seconds until you hear an acoustic signal and the indicator light flashes red twice.

Pairing

Pair the bluetooth adapter with a bluetooth-compatible mobile phone.

- The bluetooth adapter should be off, and no more than one metre from the mobile phone.

- Hold down the multifunction button for 4–5 seconds until the indicator light flashes blue and red alternately. The bluetooth adapter is now paired.

- Activate bluetooth on the mobile phone and search for the available bluetooth devices (instructions for this can be found in the phone's manual).

- Select 'HAMRON BT1' from the list of devices found by the phone.

- Enter the password '0000'. If the pairing process is not completed within five minutes, the bluetooth adapter will return to standby mode. If this happens, repeat the steps listed above to try and carry out the pairing again.

- The bluetooth adapter and phone remain paired provided that the distance between them does not exceed 10 metres, and there are no obstacles between them.

- If the bluetooth adapter was paired with the mobile phone on a previous occasion, the devices will reconnect automatically, provided that the bluetooth adapter is switched on when the mobile phone is within reach and bluetooth has been activated.

Disconnecting

• From the mobile phone: select 'Disconnect' or the equivalent from the list of bluetooth devices on the phone.
• From the bluetooth adapter: switch off the bluetooth adapter and repeat the pairing steps listed above to connect it to a different bluetooth device.

Answering a call

When the mobile phone rings, press the multifunction button once.

Ending a call

Press the multifunction button once.

Rejecting a call

Hold the multifunction button down for two seconds.

Voice dialling

With the bluetooth adapter in standby mode, press the multifunction button once and say a voice command (the mobile phone must support voice recognition – refer to the phone's manual for further information).

Calling the last dialled number

With the bluetooth adapter in standby mode, press the multifunction button twice.

Changing the volume

Press V+ or V- to increase or lower the volume (you will hear a beep when the maximum or minimum volume is reached).

Enabling/disabling the microphone

During a call, hold down the Mute button for two seconds to switch off the microphone. Hold the Mute button for another two seconds to switch the microphone on again.

Clear pairing from the bluetooth adapter

Hold down the V+, V- and multifunction buttons simultaneously for three seconds until the indicator light flashes red twice and you hear a beep.

Call forwarding

Forward a call from the bluetooth adapter to the mobile phone: during a call, hold down V+ and V- at the same time for approximately two seconds.

Forward a call from the mobile phone to the bluetooth adapter:

A. If the mobile phone has been paired with the bluetooth adapter, hold down V+ and V- at the same time for around two seconds (works irrespective of whether one or two mobile phones have been paired).
B. If the mobile phone has not been paired with the bluetooth adapter, press the multifunction button once to forward the call back to the bluetooth adapter (only works if one mobile phone has been paired with it).

Pairing two mobile phones

1. Pair the bluetooth adapter with the first mobile phone, then switch off the bluetooth adapter.

2. Repeat the pairing for the second mobile phone.

3. Select 'HAMRON BT1' from the list of bluetooth devices found on the first mobile phone in order to enable the connection.

NOTE! It is not guaranteed that it will be possible to pair two mobile phones at the same time as technology varies from phone to phone.

Switching between two calls

If someone calls you when you already talking to someone:

1. Press the multifunction button once to answer the new call and put the current call on hold.
2. Switch between the two calls by pressing the multifunction button once.
3. Hold down the multifunction button for about two seconds to end the active call and return to the call that is on hold.

NOTE! To be able to use this function, the mobile phone must support bluetooth handsfree function version 1.5, and the mobile phone must support the call waiting feature.

Looking after the bluetooth adapter

• Do not use abrasive cleaning products on the bluetooth adapter.
• Keep the bluetooth adapter away from sharp objects which could scratch or damage it.
• Store the bluetooth adapter at room temperature in a dry place, free of dust.
• Never place the bluetooth adapter where it could potentially be displaced by an airbag, as it could be thrown through the air and cause serious injury.

Other information

• The bluetooth adapter is compatible with the bluetooth version specified above. Full compatibility with all functions in bluetooth-enabled devices cannot be guaranteed.
• Read the instruction manual for the bluetooth device in question for more information about compatibility and its functions.
• The bluetooth adapter switches off automatically if not paired within 20 minutes.
• The bluetooth adapter emits a beep when it is being switched on, but this may hard to hear when driving.
• The functions described above may vary depending on which mobile phone/bluetooth device is connected to the bluetooth adapter.
• The information provided above is subject to change without notice.

NOTE! If the bluetooth adapter does not function as expected, follow the instructions in 'Clear pairing from the bluetooth adapter'.

Jula reserves the right to make changes. In the event of problems, please contact our service department.

www.jula.com

Simple line drawing of a trash bin with diagonal lines crossing it, no text or symbols present.

Care for the environment!

Must not be discarded with household waste!

This product contains electrical or electronic components that should be recycled.

Leave the product for recycling at the designated station e.g. the clocal authority's recycling station.

CE

EC DECLARATION OF CONFORMITY

EG FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EF SAMSVARSERKLÆRING

DEKLARACJA ZGODNOŚCI WE

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

Radio and Telecommunications Terminal Equipment 1999/5/EC

EN 62479:2010, EN 60950-1:2006+A11+A1+A12, ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-17 V2.2.1, ETSI EN 300 328 V1.8.1 2012-06

RoHS Directive 2011/65/EU

This product was CE marked in year -15

Skara 2014-12-11

Tobias Hammer

PRODUCT MANAGER