FZP 56516-B - Saw Fieldmann - Free user manual and instructions
Find the device manual for free FZP 56516-B Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Petrol Chainsaw |
| Engine Displacement | 56 cc |
| Power Output | 3.0 kW (4.0 hp) |
| Guide Bar Length | 50 cm (20 in) |
| Chain Pitch | 0.375 in (3/8 in) |
| Chain Gauge | 0.050 in (1.3 mm) |
| Chain Speed (max) | 25 m/s (4800 ft/min) |
| Fuel Tank Capacity | 0.55 L |
| Oil Tank Capacity | 0.26 L |
| Weight (without fuel/chain) | 5.6 kg (12.3 lb) |
| Dimensions (L x W x H) | 80 x 30 x 30 cm (31.5 x 11.8 x 11.8 in) |
| Power Source | Petrol (2-stroke mixture) |
| Ignition System | Electronic (CDI) |
| Chain Brake | Yes, inertia-activated |
| Anti-Vibration System | Yes |
| Chain Tensioning | Tool-free side access |
| Maintenance | Clean air filter after 10 hours; sharpen chain regularly; check spark plug yearly |
| Safety Features | Chain brake, hand guard, low kickback chain, throttle lockout |
| Spare Parts | Guide bar, chain, spark plug, air filter, fuel filter, oil pump |
| Warranty | 2 years (subject to local regulations) |
Frequently Asked Questions - FZP 56516-B Fieldmann
What fuel mixture should I use for the Fieldmann FZP 56516-B chainsaw?
Use a 50:1 ratio of unleaded petrol (95 octane) to high-quality 2-stroke oil. Mix thoroughly before refueling.
How do I tension the chain on my saw?
Loosen the bar nuts slightly, turn the tensioning screw clockwise to tighten the chain, then retighten the nuts. The chain should be snug but able to be pulled freely by hand.
What type of chain oil should I use?
Use a dedicated bar and chain oil with high adhesion. Avoid used motor oil as it can damage the oil pump and is environmentally harmful.
How often should I clean the air filter?
Clean the air filter every 10 hours of operation or more frequently in dusty conditions. Use warm soapy water, dry thoroughly, and lightly oil before reinstalling.
The saw won't start. What should I check?
First, ensure there is fuel in the tank and the on/off switch is in the 'I' position. Check the spark plug for fouling or damage, and verify the spark plug cap is secure. Also inspect the fuel filter and air filter for blockages.
What is the correct spark plug gap?
The recommended spark plug gap for the FZP 56516-B is 0.6 mm (0.024 in). Use a feeler gauge to set the gap.
How do I replace the chain?
Disconnect the spark plug cap. Remove the bar nuts and side cover. Slide the old chain off the bar and sprocket. Place the new chain on the bar with the cutting teeth facing forward, then reinstall the bar and side cover. Tension the chain and tighten the nuts.
What is the recommended maintenance schedule?
After each use: clean debris from the saw. Every 10 hours: clean air filter, check chain tension, and lubricate bar nose sprocket. Every 25 hours: check spark plug and fuel filter. Annually or after 50 hours: replace spark plug and fuel filter.
Can I use the saw for cutting firewood?
Yes, the Fieldmann FZP 56516-B is designed for cutting firewood, felling small trees, and limbing. Ensure you follow safety guidelines and wear appropriate protective equipment.
Where can I find spare parts for this model?
Spare parts are available through authorized Fieldmann dealers and online retailers. Common parts include guide bars, chains, spark plugs, air filters, and fuel filters. Always use original parts to ensure compatibility and safety.
User questions about FZP 56516-B Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FZP 56516-B - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FZP 56516-B by Fieldmann.