FZP 45016-B - Saw Fieldmann - Free user manual and instructions
Find the device manual for free FZP 45016-B Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Fieldmann |
| Model | FZP 45016-B |
| Power Supply | 230 V ~ 50 Hz, 1600 W |
| Blade Diameter | 185 mm |
| Cutting Depth at 90° | 65 mm |
| Cutting Depth at 45° | 45 mm |
| No-load Speed | 5000 rpm |
| Bevel Capacity | 0° - 45° |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 310 x 250 x 280 mm |
| Cable Length | 2 m |
| Dust Extraction Port | Yes, 35 mm |
| Safety Features | Blade guard, safety switch, spindle lock |
| Maintenance | Regular cleaning, brush replacement, blade sharpening |
| Spare Parts Available | Carbon brushes, saw blades, guide fence |
| Recommended Use | Wood cutting, paneling, framing |
Frequently Asked Questions - FZP 45016-B Fieldmann
How do I change the saw blade on the Fieldmann FZP 45016-B?
Unplug the saw, press the spindle lock, use the supplied wrench to loosen the bolt, remove the outer flange and old blade, install new blade with teeth facing forward, tighten bolt, release spindle lock.
What is the maximum cutting depth at 45 degrees?
The maximum cutting depth at a 45° bevel is 45 mm.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, move the base plate to the desired depth, then tighten the lever securely.
How do I set the bevel angle?
Loosen the bevel adjustment knob, tilt the saw base to the desired angle (0-45°), and tighten the knob.
What type of blade does the FZP 45016-B use?
It uses a 185 mm diameter blade with a 20 mm arbor, typically with 24 teeth for general cutting.
How do I connect a vacuum cleaner for dust extraction?
Attach the vacuum hose to the dust extraction port (35 mm) on the rear of the saw. Ensure a tight fit for effective dust collection.
What safety precautions should I take?
Always wear safety goggles and ear protection. Ensure the blade guard works properly. Do not force the saw. Use a rip fence for straight cuts.
How often should I replace the carbon brushes?
Check carbon brushes every 50 hours of use or if you notice sparking. Replace them when worn to less than 5 mm length.
Can I use this saw for metal cutting?
No, the FZP 45016-B is designed for wood and wood-like materials. Using it on metal may damage the blade and void the warranty.
Where can I purchase spare parts?
Spare parts like blades, carbon brushes, and guide fences are available from authorized Fieldmann dealers or online service centers. Use genuine parts for safety.
User questions about FZP 45016-B Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FZP 45016-B - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FZP 45016-B by Fieldmann.
