FH-2062 - Heating Vivax - Free user manual and instructions
Find the device manual for free FH-2062 Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fan Heater |
| Brand | Vivax |
| Model | FH-2062 |
| Power Supply | AC 220-240V, 50Hz |
| Heating Power | 2000W (max) |
| Heat Settings | 2 levels (low/high) |
| Fan Only Mode | Yes |
| Thermostat | Adjustable, built-in |
| Oscillation | Yes, wide-angle (approx. 90°) |
| Safety Features | Overheat protection, tip-over switch |
| Dimensions (L x W x H) | Approx. 25 x 15 x 30 cm |
| Weight | Approx. 1.5 kg |
| Control Type | Rotary dial with thermostat knob |
| Cord Length | Approx. 1.5 m |
| Noise Level | < 45 dB (low setting) |
| Maintenance | Clean with soft dry cloth; do not immerse in water |
| Spare Parts Availability | Contact Vivax service center for replacement parts |
| Repairability | Designed for professional repair only; do not disassemble |
| IP Rating | IP21 (splash-proof for indoor use) |
Frequently Asked Questions - FH-2062 Vivax
How do I clean the FH-2062 heater?
Ensure the heater is unplugged and cooled down. Use a soft dry cloth to wipe the exterior. Do not use water or cleaning solvents. Clean the air inlet grille with a vacuum brush attachment.
Is it safe to use in a bathroom?
The heater has IP21 splash-proof rating, but it is not suitable for high-moisture areas. Keep it at least 3 feet away from water sources and never place it near a bathtub or shower.
Does the FH-2062 come with a remote control?
No, the FH-2062 is controlled manually via rotary dials on the unit. A remote control is not included.
What is the power consumption per hour on high setting?
At maximum 2000W, the heater consumes 2 kWh per hour. On low setting (1000W), it uses 1 kWh per hour. Actual cost depends on your electricity tariff.
How do I set the desired temperature?
Turn the thermostat knob clockwise to increase temperature. The heater will automatically cycle on/off to maintain the set temperature. Use a thermometer to check room temperature.
Does the heater have a timer?
No, the FH-2062 does not have a built-in timer. You may use an external plug-in timer if needed.
Is the FH-2062 noisy?
On low heat setting, the noise level is around 40 dB (whisper quiet). On high setting, it may reach 45 dB, similar to a quiet conversation.
Can I use this heater in a small room?
Yes, it is ideal for rooms up to 20 m² (approx. 200 sq ft). Ensure the room is well-ventilated and the heater is placed on a stable, flat surface.
How should I store the heater during non-winter months?
Clean the heater thoroughly, allow it to dry, and store it in a dry, dust-free place. Keep it in a box or cover to prevent dust accumulation.
Where can I find the serial number?
The serial number is located on the rating label at the back or bottom of the heater. It is needed for warranty claims and spare parts.
User questions about FH-2062 Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual FH-2062 - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FH-2062 by Vivax.