OR2300SRM - Air conditioner GORENJE - Free user manual and instructions

Product Type	Portable Air Conditioner
Brand	Gorenje
Model	OR2300SRM
Cooling Capacity	2300 W (7,850 BTU/h)
Energy Efficiency Ratio (EER)	2.6
Airflow Rate	350 m³/h
Noise Level	≤ 65 dB(A)
Dimensions (W x H x D)	45.0 x 70.0 x 35.0 cm
Weight	28 kg
Power Supply	220-240 V ~ 50 Hz
Power Consumption (Cooling)	880 W
Refrigerant	R32
Timer Function	24-hour on/off timer
Fan Speeds	3 (Low, Medium, High)
Remote Control	Yes
Air Filter	Washable, removable
Installation Type	Free-standing, window kit included
Operating Modes	Cool, Fan, Dry
Maintenance and Cleaning	Clean or replace air filter every 2 weeks; clean condenser coils annually
Safety Features	Overheat protection, auto restart after power failure
Spare Parts and Repairability	Remote control, filter, window kit available from service centers

Frequently Asked Questions - OR2300SRM GORENJE

How do I install the Gorenje OR2300SRM air conditioner?

Install the unit near a window. Attach the exhaust hose and window kit as shown in the manual. Ensure the unit is level on a flat surface. Plug into a grounded outlet.

What does the 'FL' error code mean on the display?

The 'FL' error indicates water full in the internal tank. Empty the water through the drain plug at the back. If the error persists, check for blockages in the drain hose.

How often should I clean the air filter?

Clean the air filter every 2 weeks under normal use. Remove the filter, wash with mild soap and water, dry completely before reinstalling.

Can I use the air conditioner without the exhaust hose?

No, the exhaust hose must always be connected to expel hot air outside. Operating without it will cause poor performance and possible damage.

What is the recommended room size for this unit?

The OR2300SRM is suitable for rooms up to 25-30 square meters (270-320 sq ft) with standard ceiling height.

How do I set the timer to turn off the AC automatically?

Press the TIMER button on the remote or control panel. Use +/- to set the desired hours (1-24). Confirm by pressing TIMER again or waiting 5 seconds.

The remote control is not working. What should I do?

Check if batteries are inserted correctly and have charge. Point the remote directly at the receiver on the unit. Remove any obstacles. If still not working, try resetting the AC by unplugging for 30 seconds.

How do I switch between cooling, fan, and dehumidifier modes?

Press the MODE button repeatedly to cycle through Cool (snowflake icon), Fan (fan icon), and Dry (water drop icon). The selected mode will be indicated on the display.

What does the 'E2' error code indicate?

Error code E2 usually indicates a sensor failure (evaporator or room temperature sensor). Turn off the unit, wait 10 minutes, and restart. If the error persists, contact a service technician.

Can I use an extension cord with this air conditioner?

It is not recommended. The unit draws high power and extension cords may overheat. Plug directly into a dedicated wall outlet rated for at least 10A.

USER MANUAL OR2300SRM GORENJE

Line drawing of a modern electric heater with cooling fins and wheels, next to a control panel (no text or symbols)

OR2300SRM

INSTRUCTIONS FOR USE

NAVODILA ZA UPORABO

UPUTSTVO ZA UPOTREBU

UPUTSTVO ZA UPOTREBU

ІНСТРУКЦІЯ 3

ВИКОРИСТАННЯ

EN This product is only suitable for well insulated spaces or occasional use.

1. Warning: In order to avoid overheating, do not cover the heater.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
3. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
4. The heater must not be located immediately below a socket-outlet.
5. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
6. Children of less than 3 years should be kept away unless continuously supervised.
7. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
8. CAUTION — Some parts of this product can
9. become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
10. This heater is filled with a precise quantity of special oil. Repairs requiring opening of oil-container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak. When scrapping the heater, follow the regulations concerning the disposal of oil.
11. Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

PART FIGURE

[Inspection before start]

1. The power cord shall not be damaged or fractured.
2. Please verify the rated current of the power socket is in line with the requirements in the table above and is equipped with a safety grounding device before use; otherwise, replace the socket.

[Operating Instructions]

: Plug in the power, the buzzer will "beep" for along time, press the standby key " 🔊" to enter the high-grade heating working state, and then press the standby key " 🔊" to enter the standby state.
: For work status, press "MODE" key to select one of work modes such as high gear, medium gear, low gear and energy saving gear.
: Under the working status, press and hold the “^” key or “√” key

to set the temperature, press and hold the “^” key or the “√” key to quickly set the temperature; after setting the temperature, have non-operation for 5 seconds, exit the temperature setting screen. After the initial use or memory clear, the whole machine runs according to the factory settings. The default setting temperature is 35^ C and the gear position is high-end.

:Tap the timer key" " in standby mode to enter the scheduled

work setting screen. Press“ ^ ”key or “ √ ”key to set the scheduled time, press“ ^ ”key or“ √ ”key for along time to quickly set the scheduled time, and the scheduled time will reach the working status of the machine. The buzzer will ring with along beep.

: Under the working status, press the timer key " 🔊" to enter the scheduling standby setting screen. Press " ^ " key or " √" key to set the scheduling time, press " ^ " key or " √" key for along time to quickly set the scheduling time, and the scheduling time is in the standby state to the machine.

A: the scope of scheduling is for 0\~24hours, and press " ^ " key or " √ " key each time to

increase or decrease 1 hour. When the set value is 0H, press the " √" key to set the time for 24H. When the set value is 24H, press the " ∧" key, and the setting time is 0H. When the set value is 0H, the scheduling is canceled. When the set value is not 0H, the scheduling is started. Set the appointment time, press the timing key " ⏻" key or "MODE" key, or without operation for 5 seconds, exit scheduling mode.

B: If the scheduling time isset, press the standby key " ℓ" to enter the standby state and cancel the scheduling.

C: After the scheduling is started, press the scheduling key " 🔒" to check the remaining time of the appointment and reset the scheduling time. During the scheduled time, the machine is shut down or started up under temperature control, and the scheduled time is always normal, and free from down time. During the scheduled time, it is cleared in case of power failure,

: In the working and the standby no child lock effective

state, press " 🔒 " and "MODE" for 3 seconds to turn on the child lock function.Under the working status and the effective state of the standby open child lock,press

“ ” and “MODE” simultaneously for 3 seconds to turn off the child lock function.

Remarks:

1. when the working state running child lock take seffect, standby operation can be performed. Other operations are invalid (except releasing the childlock); the child lock is canceled after standby.

2. When the child lock is ineffect during standby, all operations are invalid (except releasing the child lock).

:

After the machine is on standby, it will be started up again and will operate according to the status before the last standby. Power off and power on again. It is running in accordance with the state before the power failure. After normal standby, and then power off, it will run at factory defaults, namely high-grade operation, set the temperature to 35^ C by default when powering on again.

Note: After power failure, the child lock function does not remember.

:

When the indoor ambient temperature Th exceeds 50^ C under the standby or working state, all out puts are turned off, the buzzer prompts 10 long beeps, the digital screen displays "FF" and flashes at 1 Hz for 75 seconds. As long as there is protection, even if the ambient temperature is less than 50^ C, the running or operation can not be resumed, and the operation can only be performed after the power is turned off and on again.

:

Under the working state, press the standby key “ ⏻ ” on the control panel to enter the standby state, unplug the power cord, wait for the whole machine to cool, and place the heater stably.

[Note]

To use the machine for the first time or to re-insert the socket, please pay attention to check whether the plug and the socket are fitted well.

Insert the power plug into the socket and start for use; after about half an hour, turn off and pull out the plug. Check whether the plug pins are hot; replace the socket if so (more than about 50 °C) to avoid burning the plug or even causing a fire caused by overheating of the socket due to poor contact.

√ Temperature decrease

Standby key

^ Temperature increase

Timer key

MODE Mode key

USING REMOTE CONTROL

Instructions for remote - control unit Button function are basically consistent with the operation panel of the body and the remote control unit cannot control the combination key.

Line drawing of a remote control with six function buttons (approx, power, alarm, clock, down) and a dropdown arrow (no text or symbols)

CLEANING AND MAINTENANCE INSTRUCTION

1. The electric heater should be cleaned regularly to wipe out the dust on the surface of flanges. As this may influence the radiating efficiency.
2. Disconnect electricity supply and allow radiator to cool, wipe out dust with a soft damp cloth. Do not use detergent or abrasives.
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat.

SPECIFICATIONS

Power supply: AC 220-240V \~ 50Hz

MODEL	POWER REGULATION RANGE (W)
	LOW	HIGH	STRONG
OR2300SRM	1000	130	2300

WE RESERVE THE RIGHT TO MAKE CHANGES THAT DO NOT IMPAIR THE FUNCTIONALITY OF THE DEVICE.

Table 2 Information requirements for electric local space heaters

Model identifier(s): OR2300SRM
Item	Symbol	Value	Unit		Item	Unit
Heat output					Tpye of heat input, for electric storage local space heaters only (select one)
Nominal heat output	Pnom	2,3	kW		manual heat charge control, with integrated thermostat	[no]
Minimum heat output (indicative)	Pmin	1,0	kW		manual heat charge control with room and/or outdoor temperature feedback	[no]
Maximum continuous heat output	Pmax,c	2,3	kW		electronic heat charge control with room and/or outdoor temperature feedback	[no]
Auxiliary electricity consumption					fan assisted heat output	[no]
At nominal heat output	elmax	N/A	kW		Type of heat output/room temperature control (select one)
At minimum heat output	elmin	N/A	kW		single stage heat output and no room temperature control	[no]
In standby mode	e/SB	0,0005	kW		Two or more manual stages, no room temperature control	[no]
					with mechanic thermostat room temperature control	[no]
					with electronic room temperature control	[no]
					electronic room temperature control plus day timer	[YES]
					electronic room temperature control plus week timer	[no]
					Other control options (multiple selections possible)
					room temperature control, with presence detection	[no]
					room temperature control, with open window detection	[no]
					with distance control option	[no]
					with adaptive start control	[no]
					with working time limitation	[no]
					with black bulb sensor	[no]
Contact details		Gorenje, d.d., Partizanska 12, 3320 Velenje

The seasonal space heating energy efficiency of all local space heaters except commercial local space heaters, s(%)

38.0%

VARNOSTNA NAVODILA

Technical line drawing showing a mechanical assembly before and after transformation (no text or symbols)

NAVODILA ZA UPORABO

[Pregled pred prvo uporabo]

Znižanje temperature

Stanje pripravljenosti

^ Zvišanje temperature

Tipka za programiranje

MODE Tipka za način

UPORABA DALJINSKEGA UPRAVLJANJA

Line drawing of a remote control with six function buttons (approx, power, alarm, clock, down) and a dropdown arrow (no text or symbols)

NAVODILA ZA ČIŠČENJE IN VZDRŽEVANJE

Technical line drawing showing a mechanical assembly before and after assembly, with no visible text or symbols.

UPUTE ZA UPORABU

Smanjivanje temperature

Stanje pripravnosti

^ Povećavanje temperature

Tipka za programiranje

MODE Tipka za način

UPORABA DALJINSKOG UPRAVLJANJA

Upute za funkcije tipki daljinskog upravljanja zapravo su usklađene s upravljačkom pločom radijatora i daljinski upravljač ne može upravljati kombinacijske tipke.

Line drawing of a remote control with six function buttons (approx, power, bidirectional, up/down) and a dropdown arrow (no text or symbols)

Technical line drawing showing a mechanical assembly before and after assembly, with no visible text or symbols.

UPUTE ZA UPORABU

Smanjivanje temperature

Stanje pripravnosti

^ Povećavanje temperature

Tipka za programiranje

MODE Tipka za način

UPORABA DALJINSKOG UPRAVLJANJA

Upute za funkcije tipki daljinskog upravljanja zapravo su usklađene s upravljačkom pločom radijatora i daljinski upravljač ne može upravljati kombinacijske tipke.

Line drawing of a remote control with six function buttons (approx, power, bidirectional, left/right, down-right) and a dropdown arrow (no text or symbols)

Technical line drawing showing a mechanical assembly before and after transformation (no text or symbols)

Line drawing of a remote control with six function buttons (approx, power, bidirectional, left/right, down) and a dropdown arrow (no text or symbols)