VC1901GCYIV - Vacuum Cleaner GORENJE - Free user manual and instructions

Product Type	Canister vacuum cleaner
Model	VC1901GCYIV
Brand	Gorenje
Noise Level	< 84 dB(A)
Power Supply	220-240 V, 50/60 Hz (typical)
Power Consumption	1200-1400 W (typical)
Dust Capacity	2-3 L (typical)
Weight	Approx. 5 kg
Dimensions (L x W x H)	Approx. 42 x 30 x 28 cm
Cord Length	Approx. 6 m
Filtration System	Washable inlet filter and replaceable outlet filter
Accessories Included	Flexible hose, telescopic tube, floor brush, crevice nozzle, furniture nozzle
Suction Control	Adjustable via airflow regulator on hose
Cord Rewind	Automatic with button
Safety Features	Thermal protection, automatic shut-off (typical)
Intended Use	Indoor, dry surfaces only
Guarantee	Refer to worldwide guarantee leaflet

Frequently Asked Questions - VC1901GCYIV GORENJE

How do I empty the dust compartment?

Press the locking buttons to open the cover, remove the dust compartment, open the bottom lid to spill the rubbish, then close and reattach the compartment until it locks.

How often should I clean the inlet filter?

Clean the inlet filter at least twice a year or when visibly soiled. For best performance, clean it after every prolonged use using a brush, shaking, or compressed air.

How do I change the outlet filter?

Open the grille on the top of the vacuum cleaner, remove the old outlet filter, insert a new one, and close the grille securely.

Can I use the vacuum cleaner to pick up liquids?

No, the appliance is designed for dry vacuuming only. Do not use it for liquids, as this may damage the unit and pose a safety risk.

What should I avoid vacuuming?

Avoid vacuuming embers, burning cigarette stubs, matches, fine building materials (sand, cement), sharp objects, or toner dust. These can damage the appliance.

How do I assemble the vacuum cleaner?

Insert the flexible hose into the connection opening until it locks. Attach the telescopic tube to the hose, then fit the desired nozzle. Ensure all filters are correctly installed before use.

How do I rewind the power cord?

Press the cord rewind button while holding the plug to guide the cord safely. Do not let the cord whip.

Is it safe to use the vacuum cleaner on stairs?

Yes, but exercise particular caution. Keep the appliance stable and avoid pulling the cord or hose excessively.

What does the dust bin full indicator mean?

When the indicator reaches the middle of the window, empty the dust bin to maintain optimal suction and prevent clogging.

Can I wash the filters?

Do not use a washing machine or hair dryer to clean the filters. Instead, gently clean them with a brush or compressed air. Allow them to air dry completely before reinserting.

USER MANUAL VC1901GCYIV GORENJE

Navodila za uporabo	SI
Upute za uporabu	BIH HR
Uputstvo za upotrebu	BIH SRB MNE
Упатства за употреба	MK
Instruction manual	EN
Інструкція з експлуатації	UK
Návod na obsluhu	SK
Instrukcja obsługi	PL
Instrucțiuni de utilizare	RO
Használati útmutató	HU
Инструкции за употреба	BG
Руководство по эксплуатации	RUS
Návod k obsluze	CZ

Vacuum cleaner description

1. Dust container and filter
2. On/off switch
3. Cord rewind switch
4. Suction power adjustment button
5. Flexible hose
6. Telescopic tube
7. Floor brush

Important warnings

1. Remove the container from the appliance and empty it by pressing the button to open it.

1. Empty the container and close it again.

1. Insert the container back into the vacuum cleaner.

3. Replacing the outlet filter

The filter is located behind the grille that you see on the top side of the vacuum cleaner.

1. Open the grille.
2. The filter is located on the grille.
3. Replace the filter with a new one, placing it in its position.
4. Put the grille with the new filter back in place.

Description of the vacuum cleaner

1. Remove the container from the appliance and empty it by pressing the button so that only it opens.

1. Empty the container and then close it again.

1. Insert the container back into the vacuum cleaner.

3. Replacing the filter

The filter is located behind the grille that you see on the top side of the vacuum cleaner.

1. Dust container and filter
2. On/off switch
3. Cable rewind switch
4. Suction power adjustment button
5. Elastic hose
6. Telescopic tube
7. Floor brush

Important warnings

1. Move the container away from the appliance and empty it by pressing the button so that only it opens.

1. Empty the container and then close it again.

1. Insert the container back into the vacuum cleaner.

2. Cleaning and replacing the filter

3. CHANGING THE OUTLET FILTER

The filter is located behind the grille you see on the top side of the vacuum cleaner.

1. Open the grille.
2. The filter is on the grille.
3. Replace the filter with a new one and put it back in place.
4. Put the grill with the new filter back in its place.

Cleaning and care of the appliance

1. Dust compartment and filter
2. On/Off button
3. Cord rewind button
4. Power control button
5. Hose
6. Telescopic tube
7. Floor brush

IMPORTANT safeguards

When using this appliance, basic precautions should always be followed:

• Please read the safety instructions carefully and use the appliance only in accordance with these instructions.
• Do not leave the appliance unattended during use.
• Caution: Assemble the appliance carefully before using it.
• Do not leave the appliance unattended when it is plugged in. Pull the plug after use or when performing maintenance work.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• The appliance is only to be used indoors, in dry rooms. The appliance must not be used for liquids.
• Operate the appliance only with parts recommended by the manufacturer.
• Do not use the device if it has been dropped, damaged, kept outdoors, or has fallen into water.
• Do not pull or carry the appliance by holding the cable only. Protect the cable from hot surfaces or other damages and do not wedge it.
• Do not pull the cable to unplug the appliance.
• Do not operate or touch the appliance or cable with wet hands.
• Do not insert any object into the openings.
• Keep the opening free from dust, hairs or other objects which might reduce the cleaning power.
• Keep your hair, loose clothes, fingers and any other body parts away from openings or moving parts.
• Switch out the device before pulling the plug.
• When cleaning stairs, pay particular attention.
• Do not use the vacuum cleaner for: embers, burning cigarette stubs, matches, etc.; liquid materials (e.g., wet carpet foam); hard, sharp objects (e.g., splinters of glass).
• Do not use the appliance with a non-permissible extension cable.
• Keep the suction hose opening and other openings away from your face and body.
• Do not use the vacuum cleaner without a dust bag, outlet air filter, or motor filter.
• The appliance is to be stored indoors, in dry rooms only. Put the appliance aside after use.
• Hold the plug when using the automatic cable rewind.
• Switch out the device when connecting or changing the suction hose or nozzles.
• The appliance is not to be used for toner dust or similar materials.
• During use, keep the suction tube, suction hose, and nozzles away from your head to prevent injuries.
• For longer use, pull out at least 2/3 of the cable length to avoid overheating and damage.
• The appliance fulfills the applicable German and European electrical standards as well as the radio interference suppression regulations.
• Never use your vacuum cleaner for vacuuming building materials (such as fine sand, lime, cement dust, etc.). Absorbed building material can damage your appliance.
• When using the vacuum cleaner for several hours at a time, pull the connecting cable all the way out.
• Noise level: Lc < 84 dB(A)

CAUTION: Never use the vacuum cleaner without the filters.

The vacuum cleaner is intended for household use only and in indoor rooms!

Connection to the mains supply

Please check that the voltage stated on the data plate matches the data of your house mains supply.

Supply cord

If the supply cord is damaged, it must be replaced with a suitable cord or a set for coiling the cable, which you can obtain from the nearest Gorenje service outlet.

If the mains cord is damaged, it must be replaced by Gorenje, a service centre authorised by Gorenje, or similarly qualified persons in order to avoid a hazard.

Data on compliance with European standards

Tests for this type of appliance have confirmed that it complies with the following European directives:

• 2006/95/EEC Low Voltage • 93/68/EEC CE Marking - 2004/108/EEC Directive on Electromagnetic Compatibility – EMC

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This guideline is the framework for a Europe-wide valid return and recycling of Waste Electrical and Electronic Equipment.

Elimination of the appliances and environment

If one day you decide to change your appliance, or you just do not need it any more, think about the environmental protection.

Vacuum cleaner assembling

Always remove the plug from the power supply before fitting or removing accessories. Before putting the appliance into service, please check if all filters are inserted correctly.

ASSEMBLY OF THE SUCTION HOSE

Insert the flexible suction hose into the connection opening at the top of the housing until you can feel it lock.

HOSE REMOVING

To remove flexible hose from the vacuum cleaner, press the buttons situated on the flexible hose base, then pull to remove it from the attachment point.

ROLLING THE CABLE OUT AND UP

Pull out the cable to such a length that easy working is ensured. Now connect the appliance to the main supply. Press the switch to activate the automatic rewinder and hold on the mains plug for safety reason.

FITTING TUBE AND ACCESSORIES

• Insert a flexible hose into a telescopic tube.
• Insert a flexible hose into a telescopic tube. • Fit a nozzle to telescopic tube:
• Floor brush is intended for cleaning bare floor and floor coverings.
• Crevice/furniture nozzle is for cleaning corners and between cushions. According to the mark rotate the nozzle to brush position to clean curtain or dust on the decorating surfaces.

Instruction for use

• Before using the appliance, unwind a sufficient length of cord and insert the plug into the power supply.
• Press the On/Off button to switch the unit on. To stop it, press the On/Off button again.
• You can adjust the air flow using the air flow regulator on the flexible hose:

- Decrease power for cleaning curtains, books, furniture, etc.

- Increase power for cleaning bare floors.

To rewind the cord, press the rewind button and guide the cord with your hand to ensure that it does not whip and cause damage.

Maintenance

1. Emptying the dust compartment subassembly

• Always operate the cleaner with the dust compartment subassembly fully installed.
• If you forget to attach a filter or attach it incorrectly, the dust compartment subassembly may not rinse properly.
• After removing the flexible hose, press the locking buttons to open the cover.
• Carry the dust compartment subassembly.

1. Remove the dust-glass cap and dispose of the rubbish.

1. Dispose of the rubbish and secure the dust compartment subassembly.

1. Replace the dust compartment subassembly until it locks into place.

2. CLEANING AND CHANGING FILTER

• The filter for the air inlet should be cleaned at least twice a year or when it becomes visibly dirty. We suggest cleaning the filter after every extended use.
• With regular cleaning and maintenance of the filter, you will achieve better cleaning results and extend the life of the appliance.
• To achieve this, we recommend the following cleaning methods:
• Cleaning with a brush,
• Shaking the dust off the filter,
• Cleaning the dust off with compressed air.

A clean filter ensures smooth air flow and optimal suction power.

3. CHANGING THE OUTLET FILTER

1. Open the grille for the air outlet.
2. When the air-outlet grille is opened, the air-outlet filter is found.
3. Remove the filter and replace it with a clean one.
4. Close the air-outlet grille.

Care and cleaning

Switch off the appliance and unplug it from the power supply.

Clean the exterior of the appliance with a soft cloth and mild detergent. Harsh or abrasive detergents will damage the exterior surface.

Never immerse the appliance or cord in water or other liquids.

CAUTION:

When the dust bin full indicator reaches the middle of the window, clean the dust bin.

Never use the appliance without filters.

Do not rinse filters in a washing machine. Do not use a hair dryer to dry them.

STORAGE

The parking system is used to park the suction tube/floor nozzle during short interruptions.

To do this, insert the holder of the floor nozzle into the parking rail on the device.

Environment

Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Guarantee & service

If you need information or if you have a problem, please contact the Gorenje Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Gorenje dealer or contact the Service department of Gorenje domestic appliances.

For personal use only!

GORENJE WISHES YOU A LOT OF PLEASURE WHEN USING YOUR APPLIANCE

DESCRIPTION

3. REPLACING THE AIR OUTLET FILTER

Cleaning and care

3. REPLACING THE AIR OUTLET FILTER

Maintenance and cleaning

2. CLEANING AND REPLACING THE FILTER

3. REPLACING THE OUTLET FILTER

1. Emptying the dust container

3. REPLACING THE FILTER

Cleaning

3. REPLACING THE EXHAUST FILTER.

Care and cleaning

1. Put it back.

2. CLEANING AND REPLACING THE FILTER

3. REPLACING THE EXTERNAL FILTER

Maintenance and cleaning