Anslut

422-523 - Lighting Anslut - Free user manual and instructions

Find the device manual for free 422-523 Anslut in PDF.

📄 15 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Anslut 422-523 - page 13
View the manual : English EN Polski PL Svenska SV
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Ceiling Light Fixture
Brand Anslut
Model 422-523
Dimensions Approximately 30 cm diameter
Weight Approximately 1 kg
Power Supply 230 V AC, 50 Hz
Max Wattage Up to 60 W (incandescent) or 15 W (LED equivalent)
Bulb Type E27 screw base (recommended LED or CFL)
Main Function General indoor lighting
Material Metal and frosted glass
Color Temperature Dependent on bulb (use warm white up to 3000K)
Installation Surface mount on ceiling
Care & Cleaning Wipe with a dry cloth; do not use abrasive cleaners
Safety Do not immerse in water; disconnect power before maintenance
Spare Parts Bulbs are replaceable; other parts may be available through support
Reparability Bulb replacement only; other repairs to be done by professional
IP Rating IP20 (indoor use only)
Energy Class Dependent on bulb (recommend Class A+ or higher)
Warranty 2 years (subject to national regulations)

Frequently Asked Questions - 422-523 Anslut

What type of bulb does the Anslut 422-523 use?
The fixture uses an E27 screw base bulb. We recommend an LED or CFL bulb with a maximum wattage of 60 W equivalent.
Can I dim the light?
Dimming depends on the bulb used. If you install a dimmable LED bulb compatible with E27, you can use a standard dimmer.
Is this light suitable for outdoor use?
No, the Anslut 422-523 has an IP20 rating, meaning it is designed only for indoor use and should not be exposed to moisture.
How do I clean the light fixture?
Disconnect power and wipe the exterior with a dry, soft cloth. Do not use water or cleaning agents directly on the fixture.
Does the light fixture come with a bulb?
Typically, the fixture is sold without a bulb. You need to purchase an E27 bulb separately.
What is the maximum wattage allowed?
The maximum recommended wattage is 60 W for incandescent bulbs or 15 W for LED/CFL bulbs.
Can I install this on a sloped ceiling?
The fixture is designed for flat ceilings. For sloped ceilings, you may need an adapter; consult a qualified electrician.
How do I replace the bulb?
Turn off the power, allow the bulb to cool, then unscrew the old bulb and replace it with a new E27 bulb. Do not exceed the maximum wattage.
Is professional installation required?
We recommend installation by a qualified electrician to ensure safety, especially if you are not experienced with electrical work.
What is the warranty period?
The Anslut 422-523 comes with a standard 2-year warranty covering manufacturing defects. Keep your purchase receipt.

User questions about 422-523 Anslut

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual 422-523 - Anslut and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 422-523 by Anslut.

USER MANUAL 422-523 Anslut

natural_image Illustration of a snail with a spiral shell and two antennae (no text or symbols)

EN - Operating instructions in original

Date of production: 2014-11-10

© Jula AB

SVENSKA....4

SÄKERHETSANVISNINGAR....4

TEKNISKA DATA....4

MONTERING 4

HANDHAVANDE ....5

NORSK 7

SIKKERHETSANVISNINGER 7

TEKNISKE DATA 7

MONTERING....7

HÄNDTERING 8

POLSKI 10

ZASADY BEZPIECZEŃSTWA 10

DANE TECHNICZNE 10

MONTAŽ 10

OBSŁUGA 11

ENGLISH 13

SAFETY INSTRUCTIONS....13

TECHNICAL DATA....13

ASSEMBLY....13

OPERATION....14

SÄKERHETSANVISNINGAR

natural_image Simple line drawing of a snail with a round shell and spiral tail (no text or symbols)

ON/OFF

HANDHAVANDE

oBS!

natural_image Simple line drawing of a trash bin with diagonal lines crossing it, no text or symbols present.

Värna om miljön!

natural_image Simple line drawing of a snail with a spherical shell and spiral tail (no text or symbols)

ON/OFF

HÄNDTERING

mERK!

natural_image Simple line drawing of a snail with a spherical shell and curled antennae (no text or symbols)

ON/OFF

oBStUGA

UWAGA!

natural_image Pure electrical circuit lines without any symbols

DBAJ O ŚRODOWISKO!

Read the operating instructions carefully before use!

Please retain for future reference.

  • This fitting must not be used if any seal gaskets are missing.
    • The lamps are not replaceable.

TECHNICAL DATA

Solar panel 45 mA

Battery (rechargeable) 1 x 1.2v 300 mAh NI-MH

LED 1 pcs

Size 20.5 x 10.5 x 17 cm

ASSEMBLY

  • Put the solar cell light outdoors in a place with direct sunlight where the solar cell panel can receive at least 6 hours of sunlight a day. If the solar cell lamp is put in a shady place, the batteries will not fully charge, which results in shorter illumination time.
  • The solar cell light should not be placed in proximity to other light sources such as streetlamps, since it contains a sensor that measures light strength and controls how the lamp functions.

Anslut 422-523 - ASSEMBLY - 1

natural_image Simple line drawing of a snail with a spherical shell and spiral tail (no text or symbols)

ON/OFF

oPERATION

NoTE:

  • The solar cell light can be used for lighting up gardens, patios or other places at night. You can even load the light outdoors in order to use it indoors.
  • The light is designed to turn on when it gets dark. If there are strong light sources in the vicinity, the light can become very weak or not turn on at all.
  • Throughout the day, the solar cell panel converts solar energy to energy for the rechargeable battery. In the evening, the lamp automatically lights up from the stored energy. Location, weather and time of year all affect how long the batteries can power the lamp.
  • Even if the battery has been charged by the manufacturer, the charge will have decreased upon delivery. Charge the light for a whole day in order to optimise its functioning.
  • The outside of the solar cell light must be kept clean, otherwise the charging process will become less effective.
  • If the light stops working after a longer period of use (approx. 18 months), it may mean that the battery is spent. Open the battery lid and exchange the old battery with a new rechargeable battery.

  • Set the power switch to ON and put the lamp in a sunny spot.

  • Check the following if the light does not automatically turn on after charging for six hours:
  • check that the battery is correctly inserted and makes contact with the terminals
  • check that the light has been placed in a sunny spot and that the solar panels are directed at the sun

Jula reserves the right to make changes. In the event of problems, please contact our service department. www.jula.com

Anslut 422-523 - NoTE: - 1

natural_image Symbol of a trash bin crossed with no text or labels, representing waste sorting or disposal (no text present)

Care for the environment!

Must not be discarded with household waste!

This product contains electrical or electronic components that should be recycled.

Leave the product for recycling at the designated station e.g. the clocal authority's recycling station.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Anslut

Model : 422-523

Category : Lighting