Booby Trap RG - Lighting Showtec - Free user manual and instructions
Find the device manual for free Booby Trap RG Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX LED Effect Light |
| Model | Booby Trap RG |
| Brand | Showtec |
| Light Source | 4 x 3W RG LEDs (Red/Green) |
| DMX Channels | 2 or 4 selectable |
| Control Modes | DMX, Standalone, Sound-Active, Master/Slave |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 15W |
| Fuse | F1A, 250V (5x20mm) |
| Dimensions (L x W x H) | 220 x 180 x 110 mm |
| Weight | 1.2 kg |
| Housing | Metal and plastic, black |
| Cooling | Convection (fanless) |
| Mounting | Floor standing or hanging bracket |
| Protection Grade | IP20 |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Power cord, user manual |
| Safety | Disconnect power before maintenance; use correct fuse rating |
| Cleaning | Clean with dry cloth; no solvents |
| Repairability | LEDs not replaceable; fuse replaceable; contact qualified service |
Frequently Asked Questions - Booby Trap RG Showtec
How do I set the DMX address on the Showtec Booby Trap RG?
Use the DMX Address button on the control panel. Press repeatedly until the desired address is displayed (1-512). Confirm by pressing Enter.
What are the DMX channel modes and how do I switch them?
The fixture has 2-channel and 4-channel modes. To switch, hold the Mode button for 3 seconds, then select 2CH or 4CH using the arrow buttons and press Enter.
How do I use the sound-active mode?
Press the Mode button until Sound appears. The fixture will react to music via the built-in microphone. Adjust sensitivity with the Up/Down buttons.
Can I daisy-chain multiple Booby Trap RG units?
Yes, in Master/Slave mode. Set one unit as Master (mode: Master) and others as Slave (Slave). Connect DMX cables from Master's DMX Out to Slave's DMX In.
Why is the light not responding to DMX?
Check that the DMX cable is securely connected, the DMX address is correct, and the controller is sending data. Also ensure the fixture is in DMX mode and not in standalone mode.
How do I clean the Showtec Booby Trap RG?
Disconnect power and use a soft, dry cloth to wipe the housing. Do not use liquids, solvents, or abrasive cleaners. Clean the lenses gently with a microfiber cloth.
What type of fuse does the Booby Trap RG use?
It uses a F1A, 250V fuse (5x20mm). Replace only with the same type. Always disconnect power before checking or replacing the fuse.
How do I reset the fixture to factory defaults?
Press and hold the Mode and Enter buttons simultaneously for 5 seconds until the display shows rESEt. Release buttons; the fixture resets.
Can the LEDs be replaced if they fail?
No, the LEDs are not user-replaceable. If an LED fails, please contact qualified service personnel or your dealer for repair.
What is the maximum ambient temperature for safe operation?
The maximum ambient temperature is 40°C (104°F). Do not operate in higher temperatures to avoid overheating and damage.
User questions about Booby Trap RG Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Booby Trap RG - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Booby Trap RG by Showtec.