StageBeam 650/1000W - Lighting Showtec - Free user manual and instructions
Find the device manual for free StageBeam 650/1000W Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stage Beam Light |
| Model | StageBeam 650/1000W |
| Power Consumption | 650W or 1000W (switchable mode) |
| Lamp Type | Halogen or HPL discharge lamp (650W or 1000W) |
| Beam Angle | Approx. 15° to 30° (manual adjustment) |
| Dimensions (L x W x H) | 360 x 280 x 280 mm |
| Weight | 4.5 kg |
| Power Supply | AC 230V / 50Hz |
| Fuse | F10A 250V (5x20mm) |
| Cooling | Forced air convection (temperature-controlled fan) |
| Housing Material | Aluminum alloy with heat-resistant black coating |
| Mounting | Floor stand or truss clamp (clamp not included) |
| Safety Features | Thermal cut-off switch, safety cable eyelet |
| Cleaning | Wipe exterior with dry cloth; use compressed air on vents |
| Replacement Parts | Lamp, fuse, power cord (check compatibility) |
| Repair | Contact authorized service center; do not open housing |
| Operating Environment | Indoor, dry location, temperature 0-40°C |
| Certifications | CE, RoHS |
Frequently Asked Questions - StageBeam 650/1000W Showtec
How do I replace the lamp?
Disconnect the power and let the unit cool. Open the lamp cover using a screwdriver. Carefully remove the old lamp and insert the new one (same type and wattage). Secure the cover and test the unit. Wear gloves to avoid oil on the lamp.
What voltage does the StageBeam 650/1000W require?
It operates on AC 230V / 50Hz. Do not connect to a different voltage without a proper transformer.
Can I use this fixture outdoors?
No, this indoor fixture is not weatherproof. Use only in dry, covered locations.
How should I clean the beam light?
Unplug and let it cool. Wipe the housing with a dry cloth. Use compressed air to blow dust from the ventilation grilles. Never use water or solvents.
Why does the light turn off automatically during use?
The built-in thermal cutoff activates if the fixture overheats. Check for blocked vents, reduce ambient temperature, or lower the power setting. Allow it to cool before restarting.
Which lamps are compatible with the StageBeam 650/1000W?
It accepts halogen or HPL lamps rated at either 650W or 1000W. Use only lamps specified by Showtec to avoid damage.
How do I mount the fixture on a truss?
Use a truss clamp (not included) with a safe working load of at least 10 kg. Attach it to the bracket, and secure the fixture with a safety cable through the eyelet.
Is the StageBeam 650/1000W DMX controllable?
No, this model is a manual beam light without DMX control. It has an on/off switch and power mode selector.
What is the beam angle range?
The beam angle is manually adjustable between approximately 15° (tight spot) and 30° (wider flood). Rotate the focus knob on the front.
How do I switch between 650W and 1000W mode?
Locate the power mode switch on the side panel. Set it to 650W or 1000W as desired. Ensure the installed lamp matches the selected wattage.
User questions about StageBeam 650/1000W Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual StageBeam 650/1000W - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. StageBeam 650/1000W by Showtec.