AW-40 - Hardware PAX - Free user manual and instructions

Type de produit	Payment Terminal
Dimensions (approx.)	180 x 80 x 40 mm
Weight (approx.)	300 g
Power Supply	Rechargeable Li-ion battery, DC 5V/2A charger
Display	4.3-inch color touchscreen
Processor	ARM Cortex-based
Memory	512 MB RAM / 4 GB internal storage
Connectivity	Wi-Fi 802.11 b/g/n, Bluetooth 4.0, Ethernet
Operating System	Android-based or Linux
Security	PCI PTS compliant, tamper-resistant
Printing	Integrated thermal printer (if applicable)
Card Reading	Magnetic stripe, EMV chip, NFC contactless
Keypad	Physical keypad for PIN entry
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Battery Capacity	2500 mAh (typical)
Charge Time	Approximately 3 hours
Interface Ports	USB-C, Micro-USB, RJ45 (Ethernet)
Maintenance	Clean with dry cloth; avoid moisture
Repairability	User-replaceable battery, external service center for other parts
Included Accessories	Charger, USB cable, quick start guide

Frequently Asked Questions - AW-40 PAX

How do I set up my PAX AW-40 for the first time?

Connect the charger to the terminal and a power outlet. Press the power button to turn it on. Follow the on-screen setup wizard to configure Wi-Fi, language, and time. Refer to the user manual for detailed steps.

How do I charge the battery?

Use the supplied charger and connect it to the terminal’s charging port. The battery charges fully in approximately 3 hours. A full charge provides up to 8 hours of active use.

Why is my terminal not turning on?

Ensure the battery is charged. Try pressing and holding the power button for 10 seconds. If still not turning on, connect the charger and wait a few minutes before attempting again. If the issue persists, contact customer support.

How do I connect to Wi-Fi?

Go to Settings > Network > Wi-Fi. Select your network, enter the password, and confirm. The terminal will display a confirmation when connected.

How do I perform a transaction?

Select the payment type on the screen. Swipe, insert, or tap the card on the terminal. Follow the prompts for PIN entry or signature. A receipt will be printed automatically if configured.

Can I reset the terminal to factory settings?

Yes. Go to Settings > System > Reset. This will erase all data and restore default settings. Make sure to backup any important data before resetting.

How do I clean the terminal?

Use a soft, dry cloth to wipe the exterior. Avoid using liquids or abrasive cleaners. For the screen, gently wipe with a microfiber cloth. Do not spray cleaning agents directly on the device.

Is the PAX AW-40 PCI compliant?

Yes, the AW-40 is PCI PTS compliant, ensuring secure payment processing. It includes tamper-resistant features to protect sensitive data.

What should I do if the screen is frozen?

Press and hold the power button for 10–15 seconds to force a reboot. If the screen remains frozen, remove the battery (if removable) and reinsert it after 30 seconds. Contact support if the problem recurs.

Where can I find replacement parts?

Authorized service centers offer genuine parts such as batteries, chargers, and screens. Contact PAX support or visit the PAX website for a list of certified providers.

USER MANUAL AW-40 PAX

Monteringsanvisning

Fönsterventil AW-40 / AB-40

Installation instructions

Slot ventilator AW-40 / AB-40

Asennusohje

Tuloilmaventülli AW-40 / AB-40

Monteringsanvisning

Vindusventil AW-40 / AB-40

009-925001

Lätt att montera!

Suitable for installation in upper window frame/casement.

When installing in a double-pane window frame, seal with a dust seal strip around the holes between the frames.

This is to avoid condensation.

Prevent cracking of the window frame / case-ment when making holes.

To prevent cracking, use clamps to tighten down a wooden block against the surface where the drill is to pass through the frame / casement.

Avoid drilling too close to window glass and edges of the window frame / casement to prevent cracking.

For optimum performance, use silicone along edges and slots, also along the underside of the vent.

Helppo asentaa!