AT-HD-3GSDI - Uncategorized Atlona - Free user manual and instructions
Find the device manual for free AT-HD-3GSDI Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3G-SDI to HDMI Converter |
| Model | AT-HD-3GSDI |
| Brand | Atlona |
| Input Interface | 1x BNC (3G/HD/SD-SDI) |
| Output Interface | 1x HDMI (with embedded audio) |
| Supported Resolutions | Up to 1080p@60Hz (3G-SDI) |
| Dimensions (W x D x H) | 4.6 x 2.6 x 0.9 in (117 x 66 x 23 mm) |
| Weight | 0.5 lb (227 g) |
| Power Supply | 5V DC via USB (cable included) |
| Power Consumption | 2.5W |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Key Features | SDI loop-through output, built-in equalizer, LED status indicators |
| Audio Support | Embedded up to 8 channels PCM/Dolby |
| EDID Management | Internal EDID emulation (pass-through) |
| Compliance | SMPTE 424M, 292M, 259M |
| Maintenance | Keep dry, clean with soft cloth, avoid direct sunlight |
| Safety | Use only included power supply, do not disassemble |
| Repairability | No user-serviceable parts; contact Atlona support |
| Included Accessories | USB power cable, quick start guide |
Frequently Asked Questions - AT-HD-3GSDI Atlona
What is the Atlona AT-HD-3GSDI?
The AT-HD-3GSDI is a 3G-SDI to HDMI converter that allows you to connect professional SDI sources (up to 1080p@60) to HDMI displays.
What input formats are supported?
It supports 3G-SDI, HD-SDI, and SD-SDI signals with automatic detection up to 1080p@60 (3G).
Does the device output audio?
Yes, embedded audio from the SDI source is passed through to the HDMI output, supporting up to 8 channels of PCM or Dolby audio.
What power is required?
The converter is powered via a 5V DC USB connection (micro-USB). An appropriate USB cable and power adapter are included.
Can I use it with a 4K source?
No, the device is designed for 1080p (3G-SDI) at maximum. It does not support 4K resolutions.
Are there any LED indicators?
Yes, there is an LED for power and another for signal status (green when locked).
How do I clean the unit?
Use a soft, dry cloth to clean the exterior. Do not use liquids or spray cleaners.
What should I do if there is no video output?
First, check the power LED. If it’s off, ensure the USB power is connected. Then verify the SDI source is active and the cable is secure. Try resetting the device by unplugging power for 10 seconds.
Can I extend the cable distance?
Yes, you can use active SDI cables or inline amplifiers to extend the reach beyond the standard limit (approx. 100m for 3G-SDI).
Is the device repairable?
The unit contains no user-serviceable parts. For repairs, contact Atlona support or an authorized service center.
User questions about AT-HD-3GSDI Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AT-HD-3GSDI - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-HD-3GSDI by Atlona.