WAP-552N - Access Point Planet - Free user manual and instructions
Find the device manual for free WAP-552N Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Planet |
| Model | WAP-552N |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps Fast Ethernet (PoE support) |
| Power Supply | Power over Ethernet (IEEE 802.3af) or DC 12V 1A |
| Dimensions | 160 x 120 x 30 mm |
| Weight | 200 g |
| Antenna Type | 2 x external detachable 5 dBi omni-directional |
| Security | WEP, WPA/WPA2-PSK, WPA2-Enterprise, MAC filtering |
| Management | Web-based GUI, SNMP v1/v2c, SSH, Telnet |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Mounting | Wall/ceiling mount kit included |
| LED Indicators | Power, LAN, Wireless |
| Certifications | CE, FCC |
| Spare Parts Availability | Contact Planet support |
| Maintenance | Keep dry, clean with soft cloth, avoid dust |
Frequently Asked Questions - WAP-552N Planet
How to reset the Planet WAP-552N to factory defaults?
Press and hold the reset button on the back panel for about 10 seconds using a paperclip. The device will reboot and restore factory settings.
What is the default IP address of the WAP-552N?
The default IP address is 192.168.1.1. Ensure your computer is on the same subnet to access the web interface.
How to change the wireless SSID on this access point?
Log in to the web interface via a browser. Go to Wireless > Basic Settings and modify the SSID. Save and apply changes.
Does the WAP-552N support PoE?
Yes, it supports Power over Ethernet (IEEE 802.3af). You can power it via a PoE switch or injector.
What is the maximum number of connected clients?
Typically, the WAP-552N can support up to 30-40 simultaneous clients, depending on traffic and environment.
How to secure the wireless network?
Enable WPA2-PSK encryption with a strong password. You can also enable MAC address filtering for additional security.
Can I use the WAP-552N as a wireless repeater?
Yes, it supports WDS bridging/repeater mode. Configure it under Wireless > Advanced Settings or similar.
What is the power consumption of this device?
The typical power consumption is 5-7 Watts when using PoE or DC adapter.
How to update the firmware on the WAP-552N?
Download the latest firmware from Planet's website. Access the web interface, go to System > Firmware Upgrade, select the file, and start the upgrade.
What antennas are compatible with this access point?
The device uses RP-SMA connectors. You can use any compatible 2.4 GHz antenna with the same connector.
User questions about WAP-552N Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAP-552N - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAP-552N by Planet.