WDAP-W3000AX - Access Point Planet - Free user manual and instructions
Find the device manual for free WDAP-W3000AX Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | WDAP-W3000AX |
| Brand | Planet |
| Wireless Standard | IEEE 802.11a/b/g/n/ac/ax |
| Frequency Band | Dual-band (2.4 GHz + 5 GHz) |
| Maximum Data Rate | Up to 3000 Mbps |
| Ethernet Ports | 1x 10/100/1000 Mbps Gigabit PoE |
| Power Supply | PoE (802.3at) or DC 12V 2A |
| Power Consumption | ≤ 15W |
| Dimensions (W x D x H) | 180 x 120 x 30 mm |
| Weight | 300 g |
| Operating Temperature | 0°C to 50°C |
| Security | WPA2/WPA3, MAC filtering, 802.1X, VLAN |
| Management | Web GUI, SNMP, SSH |
| Mounting | Ceiling/Wall mount bracket included |
| LED Indicators | Power, LAN, WLAN 2.4G, WLAN 5G |
| Reset Button | Yes |
| Antennas | Internal omnidirectional |
| Certifications | CE, FCC, RoHS |
| Operating Humidity | 10% – 90% non-condensing |
| Warranty | 2 years limited |
Frequently Asked Questions - WDAP-W3000AX Planet
How do I reset the Planet WDAP-W3000AX to factory defaults?
Press and hold the reset button on the device for about 10 seconds until the LED indicators flash. Release the button; the access point will reboot with factory settings.
What type of power supply does the WDAP-W3000AX support?
It supports Power over Ethernet (PoE) 802.3at and a DC 12V 2A adapter. Use only the supplied or compatible power source.
Can I use this access point outdoors?
No, the WDAP-W3000AX is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the device.
How many wireless clients can it support?
Typically up to 128 concurrent clients, depending on network traffic and environment.
How do I configure the access point for the first time?
Connect via Ethernet to the LAN port. The default IP is 192.168.1.1. Open a web browser and log in with default credentials (admin/admin). Follow the quick setup wizard.
Does it support mesh networking?
No, the WDAP-W3000AX is a standalone access point. For mesh, consider other Planet models like WDAP-3000AX.
What should I do if the device is not powering on?
Check the Ethernet cable connection and ensure your PoE switch or injector is working. Try a DC power adapter if available. If still no power, contact support.
How can I improve wireless range?
Place the access point centrally, away from obstacles. Adjust antenna orientation if external. Use 2.4 GHz for better range, 5 GHz for speed.
Is it compatible with a router from another brand?
Yes, it works with any router supporting standard Ethernet and PoE. Configure the access point as a separate subnet or bridge mode.
How do I update the firmware?
Download the latest firmware from Planet's official website. In the web interface, go to Administration > Firmware Upgrade and upload the file. Do not power off during update.
User questions about WDAP-W3000AX Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WDAP-W3000AX - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WDAP-W3000AX by Planet.