LAM-055 - Motion detector Steren - Free user manual and instructions
Find the device manual for free LAM-055 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Steren |
| Model | LAM-055 |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (39 feet) |
| Detection Angle | 120 degrees |
| Power Supply | 110-240V AC, 50/60 Hz |
| Power Consumption | 0.5W (standby), 5W (active) |
| Load Capacity | Up to 1000W (incandescent), 200W (LED) |
| Time Delay Adjustment | 5 seconds to 30 minutes |
| Light Sensitivity | Adjustable (day/night mode) |
| Mounting Height | 2.0 to 2.5 meters (6.5 to 8.2 feet) |
| Operating Temperature | -20°C to +40°C (-4°F to 104°F) |
| IP Rating | IP44 (splashproof) |
| Dimensions (H x W x D) | 100 x 70 x 50 mm (3.9 x 2.8 x 2.0 in) |
| Weight | 150 g (5.3 oz) |
| Cable Length | 1.5 meters (59 inches) |
| Material | ABS plastic |
| Maintenance | Clean with soft dry cloth; avoid water and solvents |
| Safety | Disconnect power before installation; use in dry locations |
| Spare Parts & Repairability | No user-serviceable parts; contact Steren support |
Frequently Asked Questions - LAM-055 Steren
How do I install the Steren LAM-055 motion detector?
Mount the detector at a height of 2.0-2.5 meters (6.5-8.2 ft) on a wall. Connect the wires according to the diagram: brown (live), blue (neutral), and black (load). Ensure power is off before installation.
What is the detection range of the LAM-055?
The detection range is up to 12 meters (39 feet) with a 120-degree angle. The range can be adjusted using the sensitivity control.
How do I adjust the time delay?
Use the TIME knob on the detector. Turn it clockwise to increase the delay (up to 30 minutes) or counterclockwise to decrease (minimum 5 seconds).
Can I use the LAM-055 with LED lights?
Yes, but ensure the total LED load does not exceed 200W. The detector supports up to 1000W for incandescent or halogen lamps.
Why does the detector not turn off automatically?
The time delay may be set too long. Reduce the TIME setting. Also, check if the detector is in test mode (TTM). Ensure the LUX setting allows activation at night.
How do I set the light sensitivity for day/night operation?
Turn the LUX knob. To operate only at night, set it to the moon icon (dark). For daytime operation, set to the sun icon. Fine-tune as needed.
What does the 'TTM' function do?
TTM (Test Run Mode) shortens the time delay to about 5 seconds for testing. To activate, set the TIME knob to the test position (usually marked). Remember to switch it back.
Is the LAM-055 weatherproof?
The detector has an IP44 rating, meaning it is splashproof. It is suitable for covered outdoor areas but should not be exposed to direct rain.
What should I do if the detector keeps triggering falsely?
Check for sources of interference like moving tree branches, animals, or heat sources. Reduce the sensitivity or adjust the detection angle. Ensure the detector is mounted securely.
How do I clean and maintain the motion detector?
Use a soft, dry cloth to clean the lens and housing. Do not use water, solvents, or abrasive cleaners. Periodic cleaning ensures optimal detection.
User questions about LAM-055 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual LAM-055 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LAM-055 by Steren.