SE-104 - Electrical switch Sven - Free user manual and instructions

Product Type	Flush-mount double switch
Dimensions (H x W)	85 x 81 mm
Weight	Approx. 0.1 kg
Rated Current	10 A
Rated Voltage	250 V
Color	White, ivory
Housing Material	Non-flammable PC plastic
Core Material	Zinc-galvanized steel
Terminal Material	Copper with silver coating
Functions	Controls two separate light sources
Installation	Flush-mount, requires qualified electrician
Connection Diagram	Provided on the back of the switch
Overload Protection	Avoid exceeding 10 A; damage risk if overloaded
Safety	Prevent ingress of foreign objects
Maintenance	Wipe with dry cloth; no liquids
Certifications	CE, RoHS (estimated)
Manufacturer	SVEN PTE. LTD, Singapore
Country of Origin	China

Frequently Asked Questions - SE-104 Sven

What is the Sven SE-104 switch used for?

The SE-104 is a flush-mount double switch designed to control two separate light sources from the same location.

Can I install the SE-104 myself?

No, installation must be performed by a qualified electrician to ensure safety and compliance with local regulations.

What are the maximum load ratings?

The switch is rated for 10 A at 250 V. Exceeding these values may cause damage or fire.

What colors are available?

The SE-104 comes in white and ivory (undyed plastic color).

Is the switch suitable for outdoor use?

The SE-104 is designed for indoor use only. Do not expose to moisture or dust.

How do I connect the wires?

Follow the connection diagram printed on the back of the switch. Terminals are copper with silver coating.

What materials is the switch made of?

The case is non-flammable PC plastic, the core is zinc-galvanized steel, and terminals are copper with silver coating.

How do I clean the switch?

Wipe with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.

Can I use the switch with dimmers or smart controls?

No, the SE-104 is a standard on/off switch and not compatible with dimmers or smart home systems.

What should I do if the switch feels warm or makes a buzzing noise?

Disconnect power immediately and contact a qualified electrician. This may indicate an overload or loose connection.

USER MANUAL SE-104 Sven

This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information of this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damages, which have arisen from the information contained in the given Manual.

PURPOSE

SE-104 flush-mount double switch is designed for electrical circuits switching.

FEATURES

• Non-flammable PC plastic case
• Zinc-galvanized steel core
• Copper terminals with silver coating
- Possibility to control two light sources
- Undyed plastic color

• Switches should be installed and connected by qualified specialists only.
• Switches should be connected according to the connection diagram given on the item backside.
• Avoid the item overload for its damage. The peak acceptable current value of the load is indicated on its backside.
• Avoid ingress of foreign objects inside the item case.

TECHNICAL SPECIFICATIONS

Dimensions, mm	85 × 81
Peak current, A	10
Peak voltage, V	250
Color	white, ivory

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications are subject to change without notice due to the improvement of SVEN production.

Simple diagram of two adjacent empty rectangular panels with no text or symbols

Модель: SE-104

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, N° 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN Scandinavia Ltd. Finland.