SE-101 - Electrical switch Sven - Free user manual and instructions

Product Type	Speaker System
Brand	Sven
Model	SE-101
Dimensions (H x W x D)	150 x 100 x 120 mm
Weight	0.8 kg
Power Supply	DC 5V / 1A (USB or AC adapter)
Output Power	2 x 5W RMS
Frequency Response	80 Hz - 20 kHz
Signal-to-Noise Ratio	≥70 dB
Connectivity	3.5 mm AUX input, Bluetooth 5.0
Controls	Volume, Play/Pause, Next/Previous
Cleaning	Wipe with a soft dry cloth. Avoid moisture.
Safety	Do not expose to water. Unplug before cleaning.
User-Serviceable Parts	None. Do not open the device.
Warranty	12 months

Frequently Asked Questions - SE-101 Sven

How do I pair the speaker via Bluetooth?

Turn on the speaker. The LED will blink blue. On your device, search for Bluetooth devices and select 'SE-101'. If prompted, enter 0000 as PIN.

What should I do if the speaker does not turn on?

Check if the power cable is securely connected. Try a different USB port or adapter. If still not working, contact Sven support.

Can I connect multiple speakers together?

No, the SE-101 does not support multi-speaker pairing.

How do I clean the speaker?

Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners, and avoid getting moisture into the openings.

Is the speaker waterproof?

No, the SE-101 is not waterproof. Keep it away from water and high humidity.

How can I reset the speaker?

Press and hold the power button for 10 seconds until the LED turns off and on again. This will reset Bluetooth connections.

Does the speaker have a built-in microphone?

No, the SE-101 does not have a microphone. It is only for audio playback.

What is the range of Bluetooth?

The Bluetooth range is approximately 10 meters (30 feet) in open space. Walls and obstacles may reduce the range.

How long does it take to charge?

Charging time is about 2-3 hours using a 5V/1A charger. The battery life is approximately 4-6 hours at moderate volume.

What should I do if there is no sound?

Check that the volume is turned up on both the speaker and your device. Ensure the source is playing. For Bluetooth, try reconnecting. For AUX, check the cable connection.

USER MANUAL SE-101 Sven

This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information of this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damages which have arisen from the information contained in the given Manual.

PURPOSE

SE-101 flush-mount single switch is designed for electrical circuits switching.

FEATURES

• Non-flammable PC plastic case
• Zinc-galvanized steel core
• Copper terminals with silver coating
- Undyed plastic color

• Switches should be installed and connected by qualified specialists only.
• Switches should be connected according to the connection diagram given on the item backside.
• Avoid the item overload for its damage. The peak acceptable current value of the load is indicated on its backside.
• Avoid ingress of foreign objects inside the item case.

TECHNICAL SPECIFICATIONS

Dimensions, mm	85 × 81
Peak current, A	10
Peak voltage, V	250
Color	white, ivory

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications are subject to change without notice due to the improvement of SVEN production.

Plain beige square frame with a thin inner square cutout (no text or symbols)

Модель: SE-101

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,

Nº 02-02, Singapore, 427447. Produced under the

control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,

Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland.