002-225 - Loudspeaker Marquant - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Model	002-225
Brand	Marquant
Color	Black
Dimensions (W x H x D)	20 cm x 7 cm x 7 cm
Weight	0.5 kg
Power Source	Built-in rechargeable lithium-ion battery (3.7V, 1200mAh); USB charging via micro-USB port
Battery Life	Up to 8 hours at 50% volume
Charging Time	Approximately 3 hours
Wireless Connectivity	Bluetooth 5.0 with 10 meter range
Additional Inputs	3.5mm AUX input, microSD card slot
Speaker Configuration	Mono, full-range driver, passive radiator
Output Power	5W RMS
Frequency Response	80 Hz - 18 kHz
Signal-to-Noise Ratio	80 dB
Control Buttons	Power, Volume +/-, Play/Pause, Skip Track, Pairing
Microphone	Built-in microphone for hands-free calls
Included Accessories	Micro-USB charging cable, AUX cable, user manual
Maintenance	Clean with a soft dry cloth. Do not use liquids or abrasive cleaners.
Safety Warnings	Do not expose to extreme heat or water. Keep away from children. Use only approved chargers.
Spare Parts & Repairability	Battery is not user-replaceable. Contact Marquant support for repairs. Spare parts may be available through authorized service centers.
Country of Origin	China

Frequently Asked Questions - 002-225 Marquant

How do I pair my Marquant speaker with a Bluetooth device?

Press and hold the Pairing button until the LED blinks rapidly. On your device, select 'Marquant 002-225' from the Bluetooth list. If prompted, enter 0000 as the PIN.

What is the battery life and how do I charge it?

The built-in battery lasts up to 8 hours at moderate volume. Charge using the included micro-USB cable. Full charge takes about 3 hours. The LED turns solid when fully charged.

Can I use the speaker while it's charging?

Yes, you can use the speaker while it is plugged in and charging. However, to preserve battery health, it's best to unplug once fully charged.

How do I clean the speaker?

Use a soft, dry cloth to wipe the exterior. Avoid getting moisture in the ports. Do not use alcohol or abrasive cleaners as they may damage the finish.

What should I do if the sound is distorted?

First, lower the volume on both the speaker and your device. Ensure the Bluetooth connection is stable and within range (10 meters). Also check that the audio source is not clipping.

Is the speaker waterproof?

No, the Marquant 002-225 is not waterproof. Keep it away from water and high humidity to avoid damage.

How do I reset the speaker?

Turn off the speaker. Press and hold the Power button and Volume Up button simultaneously for 5 seconds. The LED will flash red and blue, indicating a reset.

Can I connect two speakers together?

This model does not support stereo pairing or daisy-chaining. Each speaker operates independently.

What is the warranty period?

Marquant offers a 1-year limited warranty against manufacturing defects. Proof of purchase is required for warranty service.

Where can I find spare parts or get repairs?

For spare parts or repairs, contact Marquant customer support via their official website or visit an authorized service center. The battery is non-user-replaceable.

USER MANUAL 002-225 Marquant

Three colorful portable electronic devices with national flags: Poland, Norway, and Sweden (no text or symbols visible)

SE BLUETOOTH-HÖGTALARE

Bruksanvisning i original

Operating instructions

(Translation of the original instructions)

Important! Read the user instructions carefully before use.

Save them for future reference.

Värna om miljön!

Care for the environment!

Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority's recycling station.

Jula reserves the right to make changes. In the event of problems, please contact our service department.

www.jula.com

Tillverkare/ Produsent/ Produenci/ Manufacturer

Jula AB, Box 363, 532 24 SKARA

Distributör/ Distributör/ Dystrybutor/ Distributor

Jula Poland Sp. z o.o., ul.

EC DECLARATION OF CONFORMITY

EG FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EF SAMSVARSERKLÆRING

DEKLARACJA ZGODNOŚCI WE

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

RoHS Directive 2011/65/EU

EN 50581:2012

This product was CE marked in year -17

Skara 2017-03-29

MATTIAS LIF

BUSINESS AREA MANAGER

SÄKERHETSANVISNINGAR

• Never attempt to dismantle the product or expose it to water or any other liquid – risk of electric shock.
• Do not expose the product to direct sunshine or naked flames.
• The product can become warm when charging.
• Never modify the product in any way. The manufacturer cannot accept liability for any damage caused by unauthorised modifications.
• Do not put or use the product and antenna together with other antennas or transmitters.

SYMBOLS

CE	Approved in accordance with the relevant EU directives.
	Sort at source as electrical waste.

TECHNICAL DATA

Electrical data (USB) 5 VDC, 500 mA
Output 3 W
Frequency response 150 Hz - 16 kHz
Bluetooth	v4.1
Impedance 3 Ω
Sensitivity 60 dB
Speaker 45 mm
Battery (built-in) Li-Ion
Battery capacity 300 mAh
Battery life 3 hours
Range 10 m
Charging time 1.5-2 hours
Audio input 3.5 mm
Micro USB Yes
Size L83 x W68 x H33 mm
Weight	150 g

DESCRIPTION

PACKAGE CONTENTS

• Speaker
• Operating instructions
  • USB cable with micro USB
  • 3.5 mm audio cable

USE

1. Connect the micro USB cable to the charging port on the speaker. Connect the other end of the cable to a USB port on a computer or to a compatible network adapter.
2. The red status light goes on to show that the product is charging.
3. The red status light goes off when product is fully charged.

PAIRING

1. Place the speaker within 9 metres of the Bluetooth device.
2. Put the power switch in the ON position. The blue status light flashes slowly three times and then flashes rapidly to indicate pairing mode.
3. Follow the instructions on the Bluetooth unit to search for the speaker.
4. Speaker designation during pairing is SE002222 for product with Swedish flag, NO002223 for product with Norwegian flag and PL002225 for product with Polish flag. If asked for a PIN code, enter 0000.
5. The blue status light flashes slowly when the pairing is completed.

USE

1. Set the switch in the ON position to start the speaker.
2. An audio prompt is given and the blue status light flashes slowly.
3. The blue status light goes on during playback.
4. Set the switch in the OFF position to switch off the speaker.

STATUS LIGHT

• Charging: Red light on
  • Fully charged: Red light out
• Pairing mode: Blue light flashes rapidly
• Connected: Blue light on
• Playback: Blue light flashes slowly