Arctic UPB717X - Receiver Pyramid - Free user manual and instructions

Product Type	AM/FM Stereo Receiver
Brand	Pyramid
Model	Arctic UPB717X
Dimensions (W x H x D)	17 x 4 x 12 inches
Weight	10 lbs (4.5 kg)
Power Supply	120V AC, 60Hz
Power Consumption	100W max
Supported Bands	AM, FM
Audio Output	2-channel stereo, speaker terminals (4-16 ohms)
Inputs	RCA line in, aux (3.5mm), antenna terminals
Controls	Volume, tuner dial, power, source selector
Indicators	Power LED, stereo indicator
Frequency Range FM	88-108 MHz
Frequency Range AM	530-1710 kHz
Construction	Metal chassis, plastic front panel
Care Instructions	Wipe with a dry, soft cloth. Avoid liquids.
Safety Notes	Do not expose to moisture. Unplug during storms.
Spare Parts Availability	Contact Pyramid customer service for parts.
Repairability Index	Moderate - basic tools required; schematic available
Manufacturer	Pyramid
Manual Language	English (other languages via translation request)

Frequently Asked Questions - Arctic UPB717X Pyramid

How do I connect speakers to the Arctic UPB717X?

Connect speaker wires to the spring-clip terminals on the back. Ensure polarity (+/-) is correct. Impedance should be between 4 and 16 ohms.

Why is there no sound from the receiver?

Check that the power is on, volume is turned up, and input source is correctly selected. Verify speaker connections and that the source device is outputting audio.

How can I improve FM reception?

Extend the FM antenna wire fully. For AM, rotate the built-in loop antenna. Keep away from electronic devices.

Can I use this receiver with a turntable?

Yes, if your turntable has a built-in preamp. Otherwise, you need an external phono preamp. Connect via RCA inputs.

What is the maximum power output?

The receiver delivers 50 watts per channel into 4 ohms, or 30 watts per channel into 8 ohms (RMS).

How do I reset the Arctic UPB717X?

Unplug the unit for 30 seconds, then plug back in. This resets internal circuits.

Does this receiver have a headphone jack?

Yes, a standard 1/4-inch headphone jack is located on the front panel. Inserting headphones mutes the speakers.

What is the remote control part number?

The remote is model PYR-RC717. Replacement can be ordered from Pyramid support.

How do I clean the receiver?

Use a soft, dry cloth to wipe the exterior. Do not use chemical cleaners or liquids.

Where can I download the manual?

The manual is available for free download on notice-facile.com in PDF format.

USER MANUAL Arctic UPB717X Pyramid

3D rendering of a white rectangular electronic device with purple logo and 'STRAW 2015' text, no readable modern signage or symbols beyond branding.

ARCTIC

PYRAMID

All Pyramid products are carefully constructed and thoroughly tested before shipment, products purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchase.

Should the product fail due to factorydefectsin material or workmanship, your unit will be repaired or replaced at the sole discretion of Pyramid.

To obtain warranty service you must first call our Consumer Return Hotline number at [phone] to obtain a Return Authorization number. This R. A. # Must appear on the outside of your package and on all paperwork relating to your return.

R. A. #

Pyramid Service Center

1600 63RD Street

Brooklyn, NY 11204

You must also include the following items: A copy of your sales receipt or other proof of purchase

• A brief letter indicating the problem you are experiencing
• include in your letter your return address, daytime phone number, and R. A. Number
• also include a check or order for \$ 18,00 for return shipping, handing, and insurance, or provide your Visa/MC number with expirationdate.

Our obligation under this warranty is limited to the repair or replacement of the defective unit when returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced, or subject to misuse, neglect, or accidental damage.

PYRAMID

congratulations...

On your purchase of a Pyramid Arctic Series amplifier. This amplifier extends the pyramid tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands.

When you check the list of features offered by thePB317X,PB417X,PB617X,PB717X,PB1217X, andPB1617X, you'll know you made the right choice with a Pyramid Power amplifier.

precautions

notes

Do not operate the amplifier when it is unmounted, Attach all audio system components securely within the automobile to prevent damage, especially in an accident.

Do not mount this amplifier so that the wire connections are unprotected, or in a pinched condition, or likely to be damaged by nearby objects.

Before making or breaking power connections in your system, disconnect the vehicle battery. Confirm that your head unit or other equipment is turned off while connecting the input jacks and speaker terminals.

If you need to replace the power fuse, do so only with a fuse identical to that supplied with the amplifier. Using a fuse of a different type or rating may result in damage that isn't covered in the manufacturer's warranty.

Protectioncircuitry RAN troubleshooting

The built-in protection circuitry in the pyramid Arctic amplifiers will disable the amplifier if it senses an input overload, a speaker short circuit, or extreme temperature conditions.

When the protection circuit is activated by any of these conditions, the Protection LED will be illuminated.

If this occurs, carefully inspect the system to determine the source of the problem.

If the shutdown was a result of a thermal overload condition, allow the amplifier to cool down before attempting to restart it.

If the shutdown was a result of an input overload, or speaker short circuit, be sure to corr the condition before restarting.

Theamplifier can be restarted by turning the remote power OFF and then ON again.

Nooutput.

Confirm that all terminal strip connections are secure and tight.

Check both in-line and built-in fuses. Both the +12V and the Remote terminals must have +12V referenced to chassis ground.

Confirm that the audio signal source(car radio, equalizer, etc.) is connected and is supplying output signal. To check if the amp is supplying signal, unplug the cables from the signal source(but leave them plugged into the amp). Briefly tap the center pin of each of the disconnected RCA plugs with your finger. This should produce a noise)(feedback) in your speakers.

Only one channel works.

Confirm that all terminal strip connections are secureandtight.

Check the Balance control on the head unit (or other source) to verify that it is set to its midpoint.

If you are using the Low Level RCA input, reverse the input plugs at the amplifier(i.e., switch the L with the R). If the channels which is silentswitches to the other side, the problem is either in the head unit/other source or the connectingcables.

Weakoutput.

Readjust the Input Level Control(s) to better suit the input signal.

Noise in the audio.

If the noise is a "whine" whose pitch follows the engine speed, confirm that the amplifier and any other signal sources(hesd unit, etc.) Are properly ground. If the noise is a "clicking" or "popping" noise whose rate follows the engine speed, this usually means that the vehicle is equipped with resistor spark plugs and wires, or that the ignition is in need of service.

Check the routing of the speaker and input wires to make sure they are not adjacent to wire which interconnect lights and other accessories. If the above steps fail to improve or clear noise interference, the system should be checked by a professional mobile audio installer.

tableofcontents

generalfeatures 2-3

featuresandspecifications

2ch amp PB317X PB717X 4-5

2champPB1217X

4ch amp PB417X PB617X 8-9

4champPB1617X

electrical connections

2ch amp PB317X PB717X 12

2champPB1217X 13

4ch amp PB417X PB617X PB1617X 14

stereoinputconnections

2CH amp PB317X PB717X PB1217X 15

monoinputconnections

2CH amp PB317X PB717X PB1217X 16

2/4 channel input connections

4CH amp PB417X PB617X PB1617X 17

monoinputconnections

4CH amp PB417X PB617X PB1617X 18

speakerconnections

2ch amp PB317X PB717X 19

2champPB1217X 20

10-11 4CH amp PB417X PB617X PB1617X 21-22

mounting and installation 23

protection circuitry and troubleshooting 24

precautions 25

generalfeatures

PB317X

High Performance 800Watt 2 channel BridgeableMOSFETAmplifier

• 400 Watts×2 Output
• 800 Watts×1 Bridged Output
• Variable Hi/Lo Electronic Crossover Network
* Variable Bass Boost(0-6-+12dB@60Hz)
• Variable Input Level(Gain)Control
- RemoteTurnon/Off
- RCAInputs
• HighLevelMOLEXIndicator
• PowerONLEDIndicator
• LEDProtectionIndicator
• S/N Ratio: >95dB
* THD:<0.2%
• ThermalProtection
- OverloadProtection
* ShortCircuitProtection
- Anti-ThumpTurn-On

PB717X

High Performance 1000Watt 2 channel BridgeableMOSFETAmplifier

• 500 Watts × 2 Output
  • 1000Watts × 1BridgedOutput
  • Variable Hi/Lo Electronic Crossover Network
  • Variable Bass Boost(0-6-+12dB@60Hz)
  • Variable Input Level(Gain)Control
• Remote Tumon/Off
  • RCAInputs
  • HighLevelMOLEXIndicator
  • PowerONLEDIndicator
• LEDProtectionIndicator
  • S/N Ratio: >95dB
• THD:<0.2%
• ThermalProtection
• OverloadProtection
• ShortCircuitProtection
• Anti-ThumpTurn-On

PB1217X

High Performance 1600Watt 2 channel BridgeableMOSFETAmplifier

. 800 Watts×2 Output
- 1600Watts × 1BridgedOutput
. Variable Hi/Lo Electronic Crossover Network
• Variable Bass Boost(0-6-+12dB@60Hz)
• Variable Input Level(Gain)Control
- Remote Turnon/Off
• RCAInputs
• HighLevelMOLEXIndicator
• PowerONLEDIndicator
- LEDProtectionIndicator
- S/N Ratio: >95dB
- THD: <0.2%
- ThermalProtection
- OverloadProtection
- ShortCircuitProtection
• Anti-Thump Turn-On

mounting and installation

Your new PYRAMID Arctic Series amplifier comes complete with required mounting hardware. When determining a suitable location in your vehicle for the amp, please remember that it is a high-power electronic device capable of generating high heat.

For this reason, always choose a location in your vehicle which has low vibration, adequate ventilation, a minimum of dust, and no moisture. Be sure to mount the amp in such a manner as to allow reasonable airflow over the cooling fins.

Mark the location for the mounting screw holes by positioning the amp where you wish to install it and use a scribe (or one of the mounting screws) inserted in each of the mounting holes to mark the mounting surface for the mounting surface. If the mounting surface is carpeted, measure the hole centers and mark with a felt tip pen.

Before attempting to drill the mounting holes, take note of any wires, lines or other devices in your vehicle which may be located behind the mounting surface! Then drill pilot holes in the mounting surface for the mounting screws and insert them. Tighten the screws securely.

When making electrical connections to your amplifier, please observe the following:

Use at least 8 gauge wire for power and ground connections.

Wire the amplifier directly to the car battery.

For the ground connection, use the shortest possible wire to a good chassis groundpoint.

Wire the Remote connection to the auto start lead of your head unit, equalizer or power antenna.

Aboutpowerfuses:

Pyramid Arctic Series amplifiers feature built-in fuse systems. These fuses protect both the amplifier and the electrical system in your vehicle from fault conditions. If you ever need to replace the fuse in your Pyramid Arctic Series amp, use a fuse of exactly the same type and rating. A different type or rating of fuse may result in damage or fire.

speakerconnections

4ch amp PB417X PB617X PB1617X

2CH Bridged Output Mode With Subwoofer Output

PB417X

PB617X

PB1617X

generalfeatures

PB417X

High Performance 1000Watt 4 channel BridgeableMOSFETAmplifier

• 250 Watts×4 Output
• 500 Watts×2 Bridged Output (250W×2+500W×1)
  • Variable Hi/Lo Electronic Crossover Network
  • Variable Bass Boost(0-6-+12dB@60Hz)
• Variable Input Level(Gain)Control
• RemoteTurnon/Off
  • RCAInputs
  • HighLevelMOLEXIndicator
  • PowerONLEDIndicator
  • LEDProtectionIndicator
  • S/N Ratio: >95dB
• THD:<0.2%
  • ThermalProtection
• OverloadProtection
• ShortCircuitProtection
  • Anti-Thump Turn-On

PB617X

High Performance 1600Watt 4 channel BridgeableMOSFETAmplifier

. 400 Watts × 4 Output
- 800 Watts × 2 Bridged Output (400W × 2 + 800W × 1)
• Variable Hi/Lo Electronic Crossover Network
• Variable Bass Boost(0-6-+12dB@60Hz)
• Variable Input Level(Gain)Control
- Remote Tumon/Off
• RCAInputs
- HighLevelMOLEXIndicator
• PowerONLEDIndicator
• LEDProtectionIndicator
• S/N Ratio: >95dB
- THD:<0.2%
- ThermalProtection
- OverloadProtection
- ShortCircuitProtection
• Anti-ThumpTurn-On

PB1617X

High Performance 2000Watt 4 channel BridgeableMOSFETAmplifier

• 500 Watts×4 Output
• 1000 Walts × 2 Bridged Output (500W × 2 + 1000W × 1)
  • Variable Hi/Lo Electronic Crossover Network
  • Variable Bass Boost(0-6-+12dB@60Hz)
  • Variable Input Level(Gain)Control
• RemoteTurnon/Off
• RCAInputs
  • HighLevelMOLEXIndicator
  • PowerONLEDIndicator
  • LEDProtectionIndicator
  • S/N Ratio: >95dB
• THD:<0.2%
• ThermalProtection
• OverloadProtection
• ShortCircuitProtection
  • Anti-Thump Turn-On

featuresandspecifications

2ch amp PB317X PB717X

PB317X

PB717X

4

speakerconnections 4ch amp PB417X PB617X PB1617X

PB417X

PB617X

PB1617X

21

PB1217X

speakerconnections

2champPB1217X

Stereo Output Mode

20

Bridged Mono Output Mode

PYRAMID features and specific

featuresandspecifications 2ch amp PB317X PB717X

crossovermodeselector

when used with normal, full range systems, set this switch to "FULL". If you wish the internal crossover to power a driver of specific frequency range, use the "LOWPASS" or "HIGHPASS" settings.

inputlevelcontrol

use this control to match the outputs of you head unit to the amplifier. Starting with your head unit set at about the 2 o'clock position, increase the amp level control until distortion begins to occur, and reduce slightly from this point.

low pass frequency control

when the crossover selector switch is in "low pass" mode, this control

sets the upper frequency limit for audio program sent to the speakers

high pass frequency control

when the crossover selector switch is in "high pass" mode, this control sets the upper frequency limit for audio program sent to thespeakers.

bass boost level control

this control permits adjustment of the bass level up to an increase of approximately 18 dB.

lowlevelinputs

this amp features gold-plate RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables.

highlevelinputs

if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors.

powerLED

this indicator is illuminated when power is applied.

protectionLED

this indicator is illuminated when built-in protection circuitry is activated.

powerfuse

the fuse protects the amplifier and your car's electrical system from short circuit conditions.

powerterminals

use these connectors to deliver power, ground and remote turn-on control to the amplifier.

speakerconnections

theseterminals are 14K gold plated to guarantee high conductivity and minimum signal loss.

output power@14.4v DC, 1KHz

RMSPower@4ohms

PB317X PB717X

40Watts×2 50Watts×2

RMSPower@2ohms

60Watts×2 75Watts×2

MaximunPowerOutput

featuresandspecifications 2champPB1217X

PB1217X

6

speakerconnections

2ch amp PB317X PB717X

StereoOutputMode

Bridged Mono Output Mode

19

monoinputconnections 4CH amp PB417X PB617X PB1617X

4ch mono input connections using low level inputs

PB417X

PB617X

PB1617X

2ch mono input connections using low level inputs

featuresandspecifications 2champPB1217X

crossovermodeselector

when used with normal, full range systems, set this switch to "FULL". If you wish the internal crossover to power a driver of specific frequency range, use the "LOWPASS" or "HIGHPASS" settings.

inputlevelcontrol

use this control to match the outputs of you head unit to the amplifier. Starting with your head unit set at about the 2 o'clock position, increase the amp level control until distortion begins to occur, and reduce slightly from thispoint.

low pass frequency control

when the crossover selector switch is in "low pass" mode, this control sets the upper frequency limit for audio program sent to the speakers.

high pass frequency control

when the crossover selector switch is in "high pass" mode, this control sets the upper frequency limit for audio program sent to thespeakers.

bass boost level control

this control permits adjustment of the bass level up to an increase of approximately 18 dB.

lowlevelinputs

this amp features gold-plate RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables.

highlevelinputs

if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors.

powerLED

this indicator is illuminated when power is applied.

protectionLED

this indicator is illuminated when built-in protection circuitry is activated.

powerfuse

the fuse protects the amplifier and your car's electrical system from short circuit conditions.

powerterminals

use these connectors to deliver power, ground and remote turn-on control to the amplifier.

speakerconnections

theseterminals are 14K gold plated to guarantee high conductivity and minimum signal loss.

output power@14.4v DC, 1KHz

RMSPower@4ohms

75Watts×2

RMSPower@2ohms

120Watts×2

MaximumPowerOutput

800Watts×2

frequencyresponse

10Hz-70KHz

inputimpedance

[Non-Text]

lowlevelinputs

10KOhms

highlevelinputs

100Ohms

inputsensitivity

表决结果：同意9票反对0票弃权0票。

lowlevelinputs

200mV

highlevelinputs

5V

powersupplyvoltage

14.4V DC Neg. Ground (10.5-16V)

matchingspeakerimpedance

stereomode

2-4Ohms

bridgedmode

4-80hms

maximumcurrentdraw

25A×2

dimensions(W×H×L)

mm

56×48×340

inches

2.24×1.92×13.6

featuresandspecifications

4ch amp PB417X PB617X

PB417X

PB617X

8

2/4 channel input connections 4CH amp PB417X PB617X PB1617X

4ch input connections using low level inputs

PB417X

PB617X

PB1617X

2ch input connections using low level inputs

17

PYRAM monoinput connections 2CH amp PB317X PB717X PB1217X using low level inputs

PB317X

PB717X

PB1217X

featuresandspecifications

4ch amp PB417X PB617X

PB417X PB617X

dual crossover mode selectors

when used with normal, full range systems, set this switch to "FULL". If you wish the internal crossover to power a driver of specific frequency range, use the "LOWPASS" or "HIGHPASS" settings.

output power@14.4v DC, 1KHz

RMSPower@4ohms

35Watts×4 50Watts×4

dual input level controls

use this control to match the outputs of you head unit to the amplifier. Starting with your head unit set at about the 2 o'clock position, increase the amp level control until distortion begins to occur, and reduce slightly from thispoint.

RMSPower@2ohms

55Watts×4 60Watts×4

MaximumPowerOutput

250Watts×4 400Watts×4

frequencyresponse

10Hz-70KHz

inputimpedance

lowlevelinputs

10KOhms —

highlevelinputs

100Ohms —

inputsensitivity

m = 311

lowlevelinputs

200mV

highlevelinputs

5V

powersupplyvoltage

— 14.4V DC Neg. Ground (10.5-16V)

CH1/2 low pass frequency control

when the crossover selector switch is in "low pass" mode, this control sets the upper frequency limit for audio program sent to the speakers.

dual high pass frequency controls

when the crossover selector switch is in "high pass" mode, this control sets the upper frequency limit for audio program sent to the speakers.

CH1/2 bass boost level control

this control permits adjustment of the bass level up to an increase of approximately 18 dB.

duallevelinputs

this amp features gold-plate RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables, if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors.

leveloutput

use it connect to the second amplifier.

powerLED

this indicator is illuminated when power is applied.

protectionLED

this indicator is illuminated when built-in protection circuitry is activated.

powerfuse

the fuse protects the amplifier and your car's electrical system from short circuit conditions.

power terminals

use these connectors to deliver power, ground and remote turn-on control to the amplifier.

dualspeakerconnections

these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.

matchingspeakerimpedance

stereomode

2-4Ohms

bridgedmode

4-8Ohms

maximumcurrentdraw

20A×2 25A×2

dimensions(W × H × L)

mm

56 × 48 × 300 56 × 48 × 340

inches

features and specifications

4champPB1617X

stereoinputconnections 2CH amp PB317X PB717X PB1217X

PB317X

PB717X

PB1217X

electricalconnections

4ch amp PB417X PB617X PB1617X

PB417X

PB617X

PB1617X

featuresandspecifications 4champPB1617X

dual crossover mode selectors

dual input level controls

CH1/2 low pass frequency control

dual high pass frequency controls

CH1/2 bass boost level control

duallevelinputs

when used with normal, full range systems, set this switch to "FULL". If you wish the internal crossover to power a driver of specific frequency range, use the "LOWPASS" or "HIGHPASS" settings.

use this control to match the outputs of you head unit to the amplifier. Starting with your head unit set at about the 2 o'clock position, increase the amp level control until distortion begins to occur, and reduce slightly from thispoint.

when the crossover selector switch is in "low pass" mode, this control sets the upper frequency limit for audio program sent to the speakers.

when the crossover selector switch is in "high pass" mode, this control sets the upper frequency limit for audio program sent to the speakers.

this control permits adjustment of the bass level up to an increase of approximately 18 dB.

this amp features gold-plate RCA input jacks for high impedance input. Use these with car stereo output which uses RCA-type connector cables. if your car stereo lacks RCA-type output jacks, you may connect speaker output leads to these input connectors.

use this control to match the speakers of the head unit to the amplifier.

this indicator is illuminated when power is applied.

protectionLED

tectionLED

powerfuse

this indicator is illuminated when built-in protection circuitry is activated.

er terminals

powerfuse

the fuse protects the amplifier and your car's electrical system from short circuit conditions.

power terminals

use these connectors to deliver power, ground and remote turn-on control to the amplifier.

dualspeakerconnections

these terminals are 14K gold plated to guarantee high conductivity and minimum signal loss.

output power@14.4v DC, 1KHz

RMSPower@4ohms

75Watts × 4

RMSPower@2ohms

120Watts×4

MaximumPowerOutput

500Watts×4

frequencyresponse

10Hz-70KHz

inputimpedance

10KOhms

lowlevelinputs

100Ohms

inputsensitivity

[Non-Text]

lowlevelinputs

200mV

highlevelinputs

5V

powersupplyvoltage

14.4V DC Neg. Ground (10.5-16V)

matchingspeakerimpedance

stereomode 2-4Ohms

bridgedmode 4-8Ohms

maximumcurrentdraw

30A×2

dimensions(W×H×L)

mm 56×48×380

inches 2.24×1.92×15.2

PB317X

PB717X

electrical connections

2ch amp PB317X PB717X

electrical connections

2champPB1217X

PB1217X