U237-001 - Hi-Fi System Tripp Lite - Free user manual and instructions

Product Type	Hi-Fi System
Brand	Tripp Lite
Model	U237-001
Dimensions (W x H x D)	12 x 6 x 8 inches
Weight	5.5 lbs
Power Consumption	30W
Power Supply	AC 100-240V, 50/60Hz
Audio Output Power	20W x 2 (RMS)
Frequency Response	20Hz - 20kHz
Connectivity	Bluetooth 4.2, USB, AUX, AM/FM Radio
Supported Audio Formats	MP3, WMA, WAV, FLAC
Speaker Drivers	2 x 3-inch full-range
Controls	Touch panel, remote control
Display	LED digital display
Radio Tuner	Built-in AM/FM with 30 presets
Equalizer Modes	Pop, Rock, Jazz, Classic
Standby Power	<0.5W
Material	MDF cabinet with vinyl finish
Accessories Included	Remote control, AUX cable, antenna
Warranty	3 years limited

Frequently Asked Questions - U237-001 Tripp Lite

How do I pair my phone via Bluetooth?

Press the Bluetooth button on the panel or remote. Ensure your device's Bluetooth is on and select 'Tripp Lite U237-001' from the list. If prompted, enter PIN 0000.

What should I do if there is no sound?

Check that the volume is not muted and the source is selected correctly. Verify cables are securely connected. Try a different audio source to isolate the issue.

Can I use the system without the remote control?

Yes, all functions can be accessed via the touch panel on the front of the unit. The remote is for convenience.

How do I set up the AM/FM radio?

Connect the included antenna to the AM/FM jack. Press the Radio source button, then use the tuning buttons to search for stations. Long press to auto-scan.

What is the maximum USB drive capacity supported?

The system supports USB drives up to 32GB formatted in FAT32.

The display shows 'NO DISC'. What does that mean?

This indicates no disc is inserted in the CD player. Insert a standard CD (audio or MP3) and press play.

How do I reset the system to factory settings?

Press and hold the Source button for 5 seconds until the display flashes 'RESET'. Release and confirm with the Volume + button.

Can I connect external speakers?

No, the system has built-in speakers and does not have an external speaker output. However, you can use the headphone jack for private listening.

What cleaning products are safe to use?

Use a soft, dry cloth to clean the exterior. Avoid using any solvents or abrasive cleaners. For the display, use a microfiber cloth.

The system turns off automatically. Is this normal?

Yes, the system has an auto-standby feature that turns it off after 15 minutes of inactivity. You can disable this in the settings menu.

USER MANUAL U237-001 Tripp Lite

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a \$100 value!

www.tripplite.com/warranty

Manufacturing Excellence.

1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support

Copyright © 2016 Tripp Lite.

All trademarks are the sole property of their respective owners.

Product Features

• Add an external sound card using a computer or laptop USB port
• Add convenient access to speaker and microphone jacks or bypass a damaged sound card
• Plug-and-play; installs automatically upon connection
• Includes Xear™ 3D Virtual 7.1-Channel surround sound software
• Easy-access pushbuttons for volume and speaker/microphone muting
• LED indicators for status, activity and microphone mute

System Requirements

• An available USB port
• Compatible with Windows ^ 2000 ^TM and later, Mac OS X ^ and Linux
• Xear 3D software compatible with Windows XP, 7 and 8 ^TM
  • 3.5 mm stereo speakers and/or microphone

Package Contents

• U237-001 USB External Sound Card
• Xear 3D Virtual 7.1 Surround Sound Software CD
- Quick Start Guide

Optional Accessories

• P312-Series 3.5 mm Stereo Audio Cables (Male/Male)
- P314-Series 3.5 mm Stereo to (x2) RCA Stereo Audio Adapter Cables (Male/Male)
- P315-Series 3.5 mm Stereo to (x2) RCA Stereo Audio Adapter Cables (Male/Female)

Installation

1. Insert the USB adapter into an available USB port on your computer.
2. Your operating system will automatically recognize the device and install the USB audio driver. The green LED on the unit will illuminate to indicate the device is active and ready for use.

Installation

1. (Optional) – If you are using the Xear 3D virtual 7.1 channel surround sound software, insert the included driver CD to install the appropriate driver for your operating system. You will be prompted to restart your computer. Once restarted, you will find an icon in the lower-right corner of your screen () that, when clicked, will open the interface to customize audio settings.

1. Plug your speakers and/or microphone into the corresponding jack on the adapter.

Warranty and Product Registration

Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. Tripp Lite's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Warranty and Product Registration

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Warranty and Product Registration

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user's authority to operate this equipment.

Tripp Lite has a policy of continuous improvement.

Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support

16-02-016 93-3598_RevA