DA-LP1101T - WiFi Repeater IDIS - Free user manual and instructions
Find the device manual for free DA-LP1101T IDIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | WiFi Repeater |
| Brand | IDIS |
| Model | DA-LP1101T |
| Wireless Standards | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna Type | Internal |
| Interface | 1 x 10/100 Ethernet Port |
| Power Supply | AC 100-240V, 50/60Hz; DC 5V/1A via micro USB |
| Power Consumption | 5W (max) |
| Dimensions (L x W x H) | 90 x 55 x 20 mm |
| Weight | 80 g |
| LED Indicators | Power, WPS, Signal Strength |
| Buttons | WPS/Reset, Power |
| Security Features | WEP, WPA/WPA2-PSK, WPS Push Button |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Certifications | CE, FCC, RoHS |
| Package Contents | WiFi Repeater, Micro USB Cable, Quick Start Guide |
| Maintenance | Clean with a dry cloth; avoid liquids |
Frequently Asked Questions - DA-LP1101T IDIS
How do I reset the IDIS DA-LP1101T WiFi Repeater to factory defaults?
Press and hold the WPS/Reset button for about 10 seconds until the LED blinks rapidly, then release. The repeater will restart with factory settings.
What is the maximum range of the DA-LP1101T?
The maximum range is approximately 30 meters indoors, depending on obstacles and interference. Walls and metal objects can reduce the range.
Can I use the DA-LP1101T with a 5GHz network?
No, the DA-LP1101T only supports 2.4GHz frequency band (802.11 b/g/n). It cannot extend 5GHz networks.
How do I set up the WiFi repeater using WPS?
Press the WPS button on your router, then within 2 minutes press the WPS button on the DA-LP1101T. The signal LED will indicate a successful connection.
What does the signal strength LED indicate?
The Signal LED shows the strength of the connection to the main router: solid green for good, orange for fair, red for weak, and blinking for connecting.
Can I connect wired devices to the repeater?
Yes, the DA-LP1101T has one Ethernet port that can connect a wired device like a computer or game console, providing internet access via the repeater.
How to update the firmware on the DA-LP1101T?
Firmware updates can be done through the web interface. Access the repeater's settings via browser (default IP: 192.168.10.1) and navigate to System Tools > Firmware Upgrade. Download the latest firmware from the IDIS support site.
What is the default login username and password?
The default username is admin and the default password is admin (both lowercase). It is recommended to change the password after initial setup.
Does the DA-LP1101T support WMM (WiFi Multimedia)?
Yes, it supports WMM (WiFi Multimedia) for better prioritization of audio, video, and voice traffic.
What should I do if the repeater is not connecting to the router?
Check that the router is within range and that the WPS feature is enabled. Alternatively, use the web interface to manually scan and select your network. Also, ensure the router's encryption is set to WPA2-PSK (AES).
User questions about DA-LP1101T IDIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your WiFi Repeater in PDF format for free! Find your manual DA-LP1101T - IDIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DA-LP1101T by IDIS.