MP8755 - Video projector 3M - Free user manual and instructions
Find the device manual for free MP8755 3M in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | 3M |
| Model | MP8755 |
| Display Technology | DLP |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lamp Life (Normal Mode) | 3000 hours |
| Dimensions (W x D x H) | 295 x 225 x 95 mm |
| Weight | 2.7 kg |
| Power Consumption | 310 W (max.) |
| Inputs | VGA, HDMI, Composite Video, S-Video, Audio |
| Keystone Correction | Vertical ±30° |
| Zoom | Manual 1.2x |
| Speaker | Built-in 2W mono |
| Warranty | 2 years (lamp 90 days) |
| Maintenance | Clean air filter every 100 hours; replace lamp when dim |
| Safety | Do not stare into lens; lamp gets hot; allow cooling before replacing |
| Spare Parts Available | Replacement lamp (model: 3M 78-6969-9485-0), air filter |
Frequently Asked Questions - MP8755 3M
How do I connect my laptop to the 3M MP8755?
Use a VGA or HDMI cable. Connect one end to your laptop output, the other to the matching input on the projector. Then press the 'Source' button on the projector or remote to select the correct input.
What is the native resolution of the MP8755?
The native resolution is XGA (1024 x 768). It can also display lower resolutions upscaled.
How do I clean the air filter?
Turn off and unplug the projector. Locate the air filter on the side or bottom. Gently remove the filter and vacuum it or wash with mild soap and water. Let it dry completely before reinstalling.
How often should I replace the lamp?
The lamp lasts about 3000 hours in normal mode. When the image becomes dim or the lamp indicator lights up, replace it with a genuine 3M lamp (model 78-6969-9485-0).
Why is there no image displayed?
Check that the projector is powered on, the lens cap is removed, and the correct input source is selected. Also verify the connected device is outputting a signal. If using a laptop, try pressing the display toggle key (Fn + F4, etc.).
Can I use the projector with a game console?
Yes, if the console outputs via HDMI or composite video. Connect the console to the corresponding input on the projector and select the correct source.
How do I adjust the focus and zoom?
Rotate the focus ring on the lens until the image is sharp. Use the zoom ring to adjust the image size. Both rings are located around the lens barrel.
What does the keystone correction do?
Keystone correction corrects trapezoidal distortion when the projector is angled up or down. Use the 'Keystone' button on the remote or menu to adjust it vertically.
How do I reset the lamp timer after replacement?
After replacing the lamp, press the 'Menu' button, go to 'Lamp Settings' or 'Service', select 'Reset Lamp Timer', and confirm.
Is the projector compatible with 3D content?
The MP8755 does not support 3D display. It is a standard 2D projector.
User questions about MP8755 3M
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual MP8755 - 3M and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP8755 by 3M.