LCS-8133 - Carte réseau/Adaptateur Longshine - Free user manual and instructions
Find the device manual for free LCS-8133 Longshine in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Interface Card (NIC) / Adapter |
| Brand | Longshine |
| Model | LCS-8133 |
| Form Factor | PCI/PCIe (standard low profile) |
| Interface | 1 x RJ-45 10/100/1000 Mbps (Gigabit Ethernet) |
| Supported Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Data Transfer Rate | Up to 1000 Mbps (1 Gbps) |
| Bus Type | PCI Express (PCIe) 1.0/2.0/3.0 compatible |
| Dimensions (approx.) | 120 mm x 60 mm x 20 mm |
| Weight (approx.) | 50 g |
| Power Consumption | Less than 2 W typical |
| Operating Voltage | 3.3 V (from PCIe slot) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity (non-condensing) | 10% to 90% |
| LED Indicators | Link/Activity (green), Speed (yellow/green) |
| Wake-on-LAN (WoL) | Supported |
| Jumbo Frame Support | Up to 9KB |
| O/S Compatibility | Windows, Linux, macOS (driver dependent) |
| Maintenance | Clean with dry cloth; no liquids |
| Safety | Low voltage device; install in turned-off PC |
| Spare Parts & Repairability | Not user-serviceable; no replaceable parts |
| Certification | FCC, CE, RoHS |
Frequently Asked Questions - LCS-8133 Longshine
How do I install the Longshine LCS-8133 network card?
Power off your computer, open the case, insert the card into an available PCIe slot, secure it with a screw, close the case, and power on. Install the driver from the included CD or download from the manufacturer's website.
Is the LCS-8133 compatible with Windows 10?
Yes, it is compatible with Windows 10, 8, 7, and older versions. Drivers are available for download if not automatically detected.
What is the maximum speed of this network adapter?
It supports Gigabit Ethernet (10/100/1000 Mbps), providing up to 1000 Mbps or 1 Gbps data transfer rate.
Does it support Wake-on-LAN (WoL)?
Yes, the LCS-8133 supports Wake-on-LAN. You may need to enable it in your operating system's network settings and BIOS.
Can I use this card in a Mac computer?
It should work in a Mac with PCIe slot, but driver support may vary. Check the manufacturer's website for macOS drivers or use built-in Apple drivers.
What do the LEDs on the card indicate?
The green LED indicates link and activity (blinks during data transfer). The yellow/amber LED indicates speed: off for 10 Mbps, green for 100 Mbps, and yellow for 1000 Mbps.
Why is my computer not recognizing the LCS-8133?
Ensure the card is firmly seated in the PCIe slot. Check if the motherboard has a compatible slot (PCIe x1, x4, x8, or x16). Try a different slot or update the BIOS.
How do I update the driver for this network card?
Visit the Longshine support page (or third-party driver sites), locate the LCS-8133 model, and download the latest driver for your operating system. Then run the installer or update via Device Manager.
Is this card compatible with Linux?
Yes, it uses the Realtek RTL8111/8168 chipset, which has built-in support in most modern Linux kernels. No additional driver is usually needed.
What should I do if the internet connection drops frequently?
Check the Ethernet cable and try a different port. Update the driver to the latest version. Disable power saving for the network adapter in Device Manager. Also, ensure there is no IP address conflict.
User questions about LCS-8133 Longshine
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Carte réseau/Adaptateur in PDF format for free! Find your manual LCS-8133 - Longshine and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LCS-8133 by Longshine.