LCS-WR5-3214N - Router Longshine - Free user manual and instructions
Find the device manual for free LCS-WR5-3214N Longshine in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Longshine |
| Model | LCS-WR5-3214N |
| Wireless Standard | 802.11n (Wi-Fi 4) |
| Frequency Bands | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Ethernet Ports | 1x WAN, 4x LAN (10/100 Mbps) |
| Antennas | 2x external, detachable |
| Power Supply | DC 9V 0.6A |
| Dimensions (W x D x H) | 150 x 120 x 35 mm |
| Weight | 200 g |
| Security Features | WEP, WPA/WPA2-PSK, MAC address filtering |
| Management | Web-based user interface (HTTP) |
| Care and Cleaning | Wipe with a dry, soft cloth; avoid liquids |
| Spare Parts Availability | Contact Longshine support for replacement antennas and power adapter |
| Repairability | User-replaceable antennas; internal components not user-serviceable |
| General Information | Designed for home and small office use; supports multiple SSIDs |
Frequently Asked Questions - LCS-WR5-3214N Longshine
How do I reset the Longshine LCS-WR5-3214N to factory defaults?
Use a paperclip to press and hold the Reset button on the back panel for about 10 seconds until the WPS LED blinks. The router will reboot with default settings.
What is the default IP address to access the router settings?
The default IP address is 192.168.1.1. Enter this in your browser's address bar and use admin for both username and password.
How can I change the Wi-Fi password?
Log into the router's web interface, go to Wireless Settings > Security, and modify the passphrase under WPA/WPA2 Pre-Shared Key.
The router is not connecting to the internet. What should I do?
Check the WAN cable connection, verify that your ISP modem is working, and ensure the router's WAN settings (dynamic/static IP) are correctly configured in Network Setup.
Can I use this router as a wireless repeater?
Yes, the LCS-WR5-3214N supports WDS (Wireless Distribution System) mode. Enable it in Wireless Settings > WDS and enter the MAC address of the main router.
How do I update the firmware?
Download the latest firmware from the Longshine website, log into the router interface, go to System Tools > Firmware Upgrade, and upload the file. Do not power off during update.
What should I do if I forget the admin password?
Perform a factory reset using the Reset button; this clears all settings including the password. After reset, use the default credentials.
The Wi-Fi signal is weak. How can I improve it?
Place the router in a central location, away from metal objects. Ensure antennas are fully upright. You can also try changing the wireless channel to a less congested one in Wireless Settings.
Does this router support IPv6?
Yes, the router supports IPv6. Enable it under Advanced Settings > IPv6 and select the appropriate connection type (e.g., DHCPv6).
How can I block specific devices from accessing my network?
Use MAC Address Filtering in Wireless Settings > MAC Filter. Add the MAC addresses you want to allow or deny and enable the filter.
User questions about LCS-WR5-3214N Longshine
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual LCS-WR5-3214N - Longshine and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LCS-WR5-3214N by Longshine.