AOC-USASLP-L8I - Controller Supermicro - Free user manual and instructions
Find the device manual for free AOC-USASLP-L8I Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | RAID Controller |
| Brand | Supermicro |
| Model | AOC-USASLP-L8I |
| Form Factor | Low Profile MD2 (6.6" x 2.536") |
| Interface | PCI Express 2.0 x8 |
| Controller Chip | LSI SAS1068E |
| Data Transfer Rate | 3 Gbps per port |
| Ports | 8 internal SAS/SATA ports via 2 x SFF-8087 connectors |
| RAID Levels | 0, 1, 1E, 10, JBOD |
| Cache Memory | 512 MB DDR2 (optional) |
| Battery Backup | Optional (BBU module) |
| Supported Drives | SAS and SATA HDD/SSD |
| Operating Systems | Windows, Linux, VMware ESXi |
| Dimensions | 168 mm x 64 mm |
| Weight | Approximately 200 g |
| Power Consumption | Typical 15 W |
| Cooling | Passive heatsink; requires airflow |
| Operating Temperature | 0°C to 55°C |
| Compliance | RoHS |
Frequently Asked Questions - AOC-USASLP-L8I Supermicro
What is the AOC-USASLP-L8I controller used for?
It is a RAID controller for connecting up to 8 SAS or SATA drives to a server or workstation, supporting RAID levels 0, 1, 1E, 10, and JBOD.
Which PCIe slot does this card require?
It requires a PCI Express 2.0 x8 slot, but is backward compatible with x16 slots.
What cables are needed to connect drives?
Use SFF-8087 to 4x SATA breakout cables or direct SAS cables depending on your backplane.
Is this controller compatible with SATA drives?
Yes, it supports both SAS and SATA drives, but mixing types in the same RAID array is not recommended.
How do I set up RAID on this controller?
Enter the controller's BIOS during boot (press Ctrl+C or similar) to access the configuration utility to create RAID arrays.
Does this card have cache memory and battery backup?
It has an optional 512 MB DDR2 cache and supports an optional battery backup unit (BBU) to protect data in case of power loss.
What operating systems are supported?
It works with Windows Server, Linux, and VMware ESXi. Drivers are available on the Supermicro support site.
Can I use this controller in a low-profile chassis?
Yes, it comes with a low-profile bracket and can be installed in 1U or 2U servers.
How do I update the firmware?
Download the latest firmware from the Supermicro support page and use the provided flashing utility (usually under DOS or UEFI).
What does the LED on the card indicate?
The activity LED blinks during drive I/O. Refer to the manual for blink patterns indicating errors or normal operation.
User questions about AOC-USASLP-L8I Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual AOC-USASLP-L8I - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AOC-USASLP-L8I by Supermicro.