AOM-S3108-H8 - Controller Supermicro - Free user manual and instructions
Find the device manual for free AOM-S3108-H8 Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | RAID Controller Card |
| Model | AOM-S3108-H8 |
| Brand | Supermicro |
| Host Interface | PCIe 3.0 x8 |
| Supported Drives | SAS 12Gbps / SATA 6Gbps |
| Internal Ports | 8 (SFF-8643) |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Cache Memory | 2GB DDR3 1600MHz |
| Cache Protection | Supercap backup (optional) |
| Dimensions (L x H) | 6.6 x 2.5 inches (low-profile) |
| Weight | 0.2 lbs |
| Power Consumption | 12W typical |
| Operating Temperature | 0°C to 55°C |
| Operating Systems | Windows, Linux, VMware |
| Management Software | MegaRAID Storage Manager |
| Key Functions | Hardware RAID, online capacity expansion, patrol read |
| Safety Precautions | Handle with ESD wrist strap; install in anti-static bag |
| Cleaning Instructions | Use compressed air to remove dust; avoid liquids |
| Spare Parts Availability | Replacement cables, brackets, and supercap module from Supermicro |
| Repair Service | Contact Supermicro support or authorized reseller |
Frequently Asked Questions - AOM-S3108-H8 Supermicro
What RAID levels does the AOM-S3108-H8 support?
The controller supports RAID levels 0, 1, 5, 6, 10, 50, and 60, providing flexibility for performance and redundancy.
Can I use SATA drives with this SAS controller?
Yes, the AOM-S3108-H8 is compatible with both SAS 12Gbps and SATA 6Gbps drives. However, mixing SAS and SATA in the same virtual disk is not recommended.
What operating systems are supported?
This controller supports Windows Server, Linux (Red Hat, Ubuntu, etc.), and VMware ESXi. Check Supermicro's compatibility list for specific versions.
How do I install the AOM-S3108-H8 in my server?
Power down the server, insert the card into an available PCIe 3.0 x8 slot, secure the bracket, connect internal cables from the card to your backplane, and then power on. Install drivers from Supermicro's website.
Does this card require additional power cables?
The AOM-S3108-H8 draws power from the PCIe slot, so no external power connection is needed. However, the optional supercap backup unit requires a separate cable if installed.
How can I monitor and manage the RAID array?
Use MegaRAID Storage Manager (MSM) for GUI management or storcli command-line tool. Both are available from Broadcom/Avago support.
What is the maximum supported drive capacity?
The controller supports drives up to 18TB or larger, limited by the specific drive size and RAID configuration. For best performance, use enterprise-class drives.
How do I update the firmware?
Download the latest firmware from Supermicro's support page. Use the MegaRAID Storage Manager or bootable ISO to flash the firmware. Always backup configuration first.
Is the AOM-S3108-H8 hot-swappable?
The card itself is not hot-swappable; you must power down the server to install or remove it. However, drives connected to the controller support hot-swap if the backplane allows.
Does this controller support SSD caching?
Yes, it supports CacheCade Pro 2.0 for using SSDs as a cache to accelerate HDD arrays. A separate license may be required.
User questions about AOM-S3108-H8 Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual AOM-S3108-H8 - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AOM-S3108-H8 by Supermicro.