040-027 - Milling machine Meec Tools - Free user manual and instructions
Find the device manual for free 040-027 Meec Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Milling Machine (Benchtop) |
| Brand | Meec Tools |
| Model | 040-027 |
| Power Supply | 230 V ~ 50 Hz |
| Motor Power | 500 W |
| Spindle Speed Range | 100 – 2000 RPM (variable) |
| Work Table Size | 450 x 150 mm |
| Max Distance Spindle to Table | 300 mm |
| Max Distance Spindle to Column | 150 mm |
| Chuck Type | Keyless drill chuck (1–13 mm) |
| Weight | Approx. 50 kg |
| Dimensions (L x W x H) | 600 x 400 x 900 mm |
| Main Functions | Drilling, milling, tapping, slotting |
| Maintenance | Regular lubrication of guide rails and spindle bearings; clean swarf after use |
| Safety Features | Emergency stop, spindle guard, overload protection |
| Spare Parts Availability | Contact Meec Tools service center or authorized dealers |
| Warranty | 2 years (subject to conditions) |
Frequently Asked Questions - 040-027 Meec Tools
How do I change the spindle speed?
Turn the speed control knob located on the motor housing. Adjust only when the machine is off and the spindle is stationary. Refer to the speed chart on the machine for safe ranges.
How often should I lubricate the machine?
Lubricate the guide rails and lead screws with light machine oil before each use. The spindle bearings should be greased every 50 hours of operation.
What safety equipment should I use?
Always wear safety glasses and avoid loose clothing. Use the spindle guard and emergency stop. Never leave the machine unattended while running.
Can I mill steel with this machine?
Yes, for light milling of mild steel. Use appropriate cutting speeds and feeds. For heavy cuts, reduce depth to prevent overload.
How do I install a milling cutter?
Use the chuck key to open the chuck. Insert the cutter shank, then tighten the chuck securely. For collets, use the drawbar to hold the tool.
Why does the motor not start?
Check that the power cord is plugged in, the emergency stop is pulled out, and the spindle switch is on. Also inspect the fuse or circuit breaker.
How do I clean the machine?
Remove chips with a brush or vacuum. Wipe the table and column with a clean cloth. Do not use compressed air as it can force debris into bearings.
What is the maximum drill bit size?
The chuck accepts bits up to 13 mm in diameter. For larger tools, use a separate chuck or collet system.
Does the machine have a depth stop?
Yes, an adjustable depth stop is located on the quill. Loosen the lock nut, set the desired depth, and tighten.
Where can I find the serial number?
The serial number is on a plate at the back of the column. It is needed for spare parts orders and warranty claims.
User questions about 040-027 Meec Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual 040-027 - Meec Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 040-027 by Meec Tools.