SS10 - Switch Tork - Free user manual and instructions

Product Type	Switch
Brand	Tork
Model	SS10
Category	Switch
Material	Thermoplastic
Color	White
Mounting Type	Flush Mount
Operating Voltage	250 V AC
Current Rating	10 A
Switch Type	Single Pole, Single Throw (SPST)
Number of Gangs	1
IP Rating	IP20
Certifications	CE, RoHS
Dimensions (HxWxD)	86 x 86 x 35 mm
Weight	0.1 kg
Operating Temperature	-10 to 40 °C
Mechanical Life	20,000 cycles
Electrical Life	10,000 cycles
Warranty	2 years

Frequently Asked Questions - SS10 Tork

How do I install the Tork SS10 switch?

Ensure power is off. Connect the live wire to the L terminal and the load wire to the L1 terminal. Secure the switch in an electrical box and attach the faceplate. Refer to the manual for detailed instructions.

Is the SS10 compatible with dimmer switches?

No, the SS10 is a standard on/off switch and is not designed for dimming. Use a compatible dimmer module for dimming functionality.

What is the maximum load for the SS10?

The maximum load is 10 A at 250 V AC, which equates to 2500 W for resistive loads. For inductive loads, derate to 50%.

How do I clean the switch?

Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid getting moisture inside the switch.

Can the SS10 be used outdoors?

The SS10 has an IP20 rating, meaning it is not protected against water. It is suitable only for indoor dry locations.

Does the SS10 have an LED indicator?

No, the SS10 is a standard switch without an LED indicator. It does not illuminate when the circuit is on.

Can I use the SS10 with a smart home system?

The SS10 is a manual switch and not directly compatible with smart home systems. For smart control, consider replacing it with a smart switch.

Where can I download the manual for the SS10?

The manual is available for free download on notice-facile.com in PDF format. Visit the product page and click 'Download'.

What tools are needed for installation?

You need a flathead and Phillips screwdriver, voltage tester, wire strippers, and electrical tape. Ensure you have appropriate safety gear.

Is the Tork SS10 certified?

Yes, the SS10 is CE and RoHS certified, meeting European safety and environmental standards.

USER MANUAL SS10 Tork

SERIES SS – In-Wall Solid StateTimers

INSTALLATION AND OPERATING INSTRUCTIONS

Timer will automatically turn load OFF at the end of a preset period which is user adjustable from 1 minute to 18 hours.

Note: 1) This unit is not suitable for lamps which require long striking periods i.e. HID type.
2) There are minimum wattage loads which are required to operate this unit - see ratings chart.

CAUTION: Disconnect power at main panel prior to installing or servicing this time switch or the equipment connected to it. We recommend that installation be done by a qualified electrician.

Warning: This timer is not to be used in precision timing applications such as for sun lamps or tanning equipment.

Refer to the output ratings below. To calculate maximum wattage, multiply the maximum amperage by the appropriate voltage.

Series	Type	Volts AC	Min. Load Watts	Ratings
SS13, SS10	3 Way Single Pole	24	6	.25 - 4.00Amp Resistive .25 - 4.00Amp Ballast .25 - 4.00Amp Tungsten 1/8 Hp @ 120 VAC 1/3 Hp @ 240 VAC
		120	30
		208	50
		240	60
		277	70
SS20	Single Pole	24	12	.50 - 7.25Amp Resistive .50 - 7.25Amp Ballast .50 - 4.00Amp Tungsten 1/6 Hp @ 120 VAC 1/2 Hp @ 240 VAC
		120	60
		208	105
		240	120
		277	150

INSTALLATION

1. If retrofit application, remove existing cover plate and wall switch.
2. Install unit as you would any single pole or 3 way toggle switch.
3. Wire in accordance with wiring diagrams below.

NOTE: For models SS13F and SS13B, RED wire is common.

ELECTRICAL CONNECTIONS
TYPICAL WIRING FOR 120 VAC SINGLE POLE

TYPICAL WIRING FOR 120 VAC - 3 WAY (Red is common)