Party Pop - Scooter RAZOR - Free user manual and instructions

Product Type	Kick Scooter
Brand	Razor
Model	Party Pop
Age Range	6 years and up (children under 8 require adult supervision)
Maximum Rider Weight	143 lb (65 kg)
Frame Material	Aluminum
Deck Material	Plastic with aluminum reinforcement
Handlebar Height	Approximately 32 inches (81 cm)
Wheel Size	100 mm (front and rear)
Wheel Material	Polyurethane
Brake Type	Rear foot brake
Bearings	Maintenance-free
Lights	LED lights activated by stepping on button (20-second duration)
Light Battery	2 x CR2032L 3V lithium (user replaceable)
Assembly Required	Yes (handlebars and T-bar)
Tools Included	5 mm Allen wrench
Safety Equipment Recommended	Helmet, knee pads, elbow pads
Riding Surface	Smooth, paved, dry surfaces
Warranty	6 months limited manufacturer warranty
Country of Origin	China
Product ID Location	Underneath deck (22-character code)
Customer Service	Razor USA: [phone]; Europe: [phone]; Asia: [phone]
Replacement Parts	Available at shop.razor.com

Frequently Asked Questions - Party Pop RAZOR

What age is the Razor Party Pop scooter suitable for?

The scooter is for children ages 6 and up. Children under 8 years should ride with direct adult supervision at all times.

What is the maximum weight limit?

The maximum rider weight is 143 lb (65 kg). Exceeding this limit may cause loss of control and injury.

How do I assemble the handlebars?

Loosen the collar clamp and slide it upward. Insert the T-bar into the fork until it bottoms out. Ensure the handlebars are square to the front wheel and tighten the clamp securely using the included 5 mm Allen wrench.

How do I activate the LED lights?

Gently step on the LED light button on the deck. The lights will remain on for approximately 20 seconds. Repeat to reactivate.

How do I replace the batteries for the lights?

Use a coin to turn the battery cover clockwise to loosen, then remove cover. Replace with two CR2032L 3V lithium batteries, ensuring both are installed with the positive (+) side up. Replace cover and tighten counterclockwise.

What maintenance does the scooter require?

Regularly inspect the collar clamp, wheels, and all hardware for tightness and wear. Clean with a damp cloth; do not use industrial cleaners or solvents. Check the brake and bearings periodically.

Can I ride the scooter on the street?

No, the scooter is intended for use only on smooth, paved surfaces away from motor vehicles and traffic hazards. Never ride on public streets.

Does the Razor Party Pop come with a warranty?

Yes, it has a 6-month limited warranty against manufacturing defects. It does not cover normal wear and tear, improper assembly, or modifications.

What is the maximum slope or incline I can ride?

Avoid steep inclines and downhill speeds. The scooter is not designed for hills; excessive speed can lead to loss of control and falls.

Can I perform tricks or stunts with this scooter?

No, the Party Pop scooter is not for aggressive or trick riding. Stunt-type riding reduces maneuverability and increases risk of injury.

USER MANUAL Party Pop RAZOR

White and black electric scooter with visible wheels and handle (no text or symbols)

OWNER'S MANUAL

Read and understand this entire manual before allowing child to use this product! For assistance contact Razor. DO NOT RETURN TO STORE.

NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect exact appearance of actual product. Specifications subject to change without notice.

Please have your 22 character product I.D. code ready before contacting Razor for warranty assistance and/or replacement parts.

Product I.D. Code: ____ - ____ - ____

CONTENTS

Safety Warnings ....1

Before You Begin....2

Assembly and Set-Up....3

Pre-Ride Checklist 4

Usage 4

Repair and Maintenance....5

Product Parts 6

Warranty and Contact Information 7

SAFETY WARNINGS

AN IMPORTANT MESSAGE TO PARENTS: This manual contains important information. For your child's safety, initial setup and steering tube installation require adult assistance for young riders. It is your responsibility to review this information with your child and make sure that your child understands all warnings, cautions, instructions and safety topics. Razor USA recommends that you periodically review and reinforce the information in this manual with younger riders and you are required to inspect and maintain your child's scooter to insure their safety.

GENERAL WARNING: Scooter riding can be a hazardous activity. Scooters can and are intended to move, and it is therefore possible to get into dangerous situations and/or lose control and/or fall. If such things occur you can be seriously injured or die. LIKE ANY OTHER MOVING PRODUCT, USING A SCOOTER CAN BE A DANGEROUS ACTIVITY AND MAY RESULT IN INJURY OR DEATH EVEN WHEN USED WITH PROPER SAFETY PRECAUTIONS. USE AT YOUR OWN RISK AND USE COMMON SENSE.

- Always wear safety equipment, such as helmet, knee pads and elbow pads. Always wear a helmet when riding your scooter and keep the chinstrap securely buckled.

• Always wear shoes.

- Ride on smooth, paved surfaces away from motor vehicles.

- Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.

- Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.

- Do not ride at night.

- Brake will get hot from continuous use. Do not touch after braking.

- Avoid excessive speed associated with downhill rides.

- Obey all local traffic and scootering laws and regulations.

- Watch out for pedestrians.

- Do not exceed 143 lb (65 kg) total weight on the Party Pop scooter.

- Do not allow children under age six (6) to use the scooter. Party Pop scooters are for children ages six (6) and above. Children under age eight (8) should ride with adult supervision at all times. All children and preteens should ride with adult guidance at all times.

- Rider weight does not necessarily mean a child's size is appropriate to fit or maintain control of the scooter.

- A parent's decision to allow his or her child to ride this product should be based on the child's maturity, skill and ability to follow rules.

ACCEPTABLE RIDING PRACTICES AND CONDITIONS

Direct parental supervision is required. Scooters are meant to be used only in controlled environments free of potential traffic hazards and not on public streets. Do not allow your child to ride a scooter in any areas where vehicle traffic is present. Child must maintain a hold on the handlebars at all times. Never allow more than one child at a time to ride a scooter. Never use near steps, sloped driveways, hills, roadways, alleys or swimming pool areas.

Do not ride a scooter in wet weather. Scooters are intended for use on solid, flat, clean and dry surfaces, such as pavement or level ground, without loose debris, such as rocks or gravel. Wet, slick or uneven and rough surfaces may impair traction and contribute to possible accidents. Do not ride a scooter in mud, ice, puddles or water. Avoid excessive speeds that can be associated with downhill rides. Never risk damaging surfaces, such as carpet or flooring, by use of a scooter indoors. Do not ride at night or when visibility is impaired.

PROPER RIDING ATTIRE

Always ensure child is wearing proper protective equipment, such as an approved safety helmet. A helmet may be legally required by local law or regulation in your area. A child should always wear shoes and keep shoelaces tied and out of the way of the wheels. Never ride barefooted or in sandals. Knee pads and elbow pads are recommended.

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION.

WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING. Properly inspecting and maintaining your scooter can reduce the risk of injury. Always inspect your scooter before riding and regularly maintain it.

WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and regulations to see where and how you may use your Razor scooter legally. In many states and local areas scooter riders are required BY LAW to wear a helmet. Check local laws and regulations regarding laws governing helmet use and scooter operation in your area.

WARNING: BATTERY

- Lithium batteries included for lights - adult attention for changing and disposal.

- Battery should only be replaced by an adult.

- Loose battery could present a choking hazard and should be kept away from small children.

- Dispose of batteries properly.

BEFORE YOU BEGIN

Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

□ Required Tools

5 mm Allen wrench (Included)

WARNING: DO NOT USE NON-RAZOR PRODUCTS WITH YOUR SCOOTER.

Razor scooters have been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may not be compatible and will void the warranty.

Product ID Locations: See locations to the left

1. Deck (underneath unit)
2. Box - side of UPC (not shown)

Box Contents:

• Scooter
• Allen Wrench
• Owner's Manual

ASSEMBLY AND SET-UP

☐ Assembling the Handlebars Assembling the Handlebars

□ Assembling the T-bar
Tool required: 5 mm Allen wrench

1 Loosen the collar clamp and slide it upward. Insert T-bar into the fork until it bottoms out on the headset locknut.

Note: If necessary, carefully twist the T-bar clock-wise while pushing downward until T-bar bottoms out on the headset locknut.

Diagram of a mechanical joint or pipe assembly with an arrow indicating rotation (no text or symbols present)

2 With the front wheel pointed straight ahead and the handlebars square to the front wheel and the Razor logo facing the front, tighten the clamp as shown. Tighten securely.

Diagram of a mechanical component with a circular outline and a checkmark arrow (no text or symbols)

Diagram of a mechanical or electrical component with a circular outline and internal structure, no visible text or symbols.

□ Activating the Batteries

Mechanical assembly diagram showing a cutting tool interacting with a component (no text or symbols visible)

1 To activate the batteries, locate the battery compartment on the top of the deck and remove the plastic tab from under the battery cover.

WARNING: Failure to properly engage the spring-loaded buttons may cause the handlebars to dislodge while riding and may cause rider to lose control and fall. When correctly engaged, the handlebars will not rotate nor move sideways, and the spring-loaded buttons will be clearly visible in the holes on the T-bar.

WARNING: Check hand grips regularly for wear or damage, as grips are designed to aid in gripping handlebars and to provide some protection against possible impact. Replace immediately if worn, torn, damaged or missing.

WARNING: Failure to properly install and tighten the pivoting mechanism and the plastic cover may cause the rider to lose control and fall. If you do not understand these instructions, contact Razor customer care for assistance.

WARNING: Do not attempt to thread the handle bar into the front fork thread. Tighten clamp securely.

PRE-RIDE CHECKLIST

Deck and Handlebars

Check for cracks or broken connections. Although broken decks are rare, it is possible for an aggressive rider to run into a curb or object and wreck and bend or break the deck. Get in the habit of inspecting your scooter on a regular basis.

Hardware/Loose Parts

Check and secure all fasteners before every ride. Make sure the collar clamp is locked properly into place before riding. There should not be any unusual rattles or sounds from loose parts or broken components. If the unit is damaged, do not ride. Reference "Safety Warnings" on page 1 of this manual.

Safety Gear

Always wear proper protective gear, such as an approved safety helmet. Elbow pads and kneepads are recommended. Always wear closed toe shoes (lace-up with rubber soles) and keep shoelaces tied and out of the way of the wheels. NEVER RIDE BAREFOOTED OR IN SANDALS.

Laws and Regulations

Always check and obey any local laws or regulations.

Be Careful!

This product is not for aggressive or trick riding. Avoid steep inclines and don't ride too fast — you can lose control and fall. Skateboard parks are not designed for young riders. Never ride in traffic or on the street and watch your surroundings for pedestrians, bikers, boarders and skaters.

Maintain a hold on the handlebars at all times.

USAGE

□ How to Ride

Place one foot on the baseboard, push forward with the other foot. Steer with both hands on the handlebars. For enhanced cornering, lean slightly into the direction of the turn.

Gently step on the LED light button to activate the LED lights. Lights will remain on for approximately 20 seconds after button has been released. Gently step on the LED light button again to re-activate the lights.

□ How to Stop

For controlled stops, apply the brake by stepping on the brake. Razor recommends that you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor scooter around others.

Line drawing of a person's lower legs and feet on a scooter, with a downward arrow indicating motion (no text or symbols)

Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual.

REPAIR AND MAINTENANCE

□ Cleaning

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic components or soften the decals or decal adhesive.

Collar Clamp

Tool required: 5 mm Allen wrench

Technical line drawing of a mechanical joint or clamp mechanism (no text or symbols)

1 Using a 5 mm Allen wrench, check that the collar clamp bolt is tightened securely. Make sure the front wheel is pointed straight ahead and the handlebars is squared to the front wheel.

Pure mechanical diagram showing a lever mechanism inside a circle, with no text or symbols present.

Diagram of a mechanical or electrical component with a circular outline and internal structure, no visible text or symbols.

□ Replacing the Batteries

Line drawing of a mechanical component with no visible text or symbols

1 Using a coin, loosen the battery cover by turning clockwise then remove cover.

Technical line drawing of a mechanical component with no visible text or symbols

2 Discard both old batteries and replace with two (2) CR2032L 3V Lithium batteries. Note: Make sure to install BOTH batteries positive (+) side up.

Line drawing of a boat's side panel with no visible text or symbols

3 Replace cover and secure with a coin by turning counterclockwise.

□ Wheels and Bearings

Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper tightness, bearings for side-to-side play, and for loose parts. When a wheel develops play, this is an indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn wheels/ bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine Razor replacement parts may affect your safety and will void your warranty.

Replacement Parts

The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the complete selection of replacement parts visit shop.razor.com.

□ Repair Centers

For a list of authorized Razor repair centers:

• Check online at www.razor.com.
  • Additional Customer Service contact information is listed at the back of this manual.

WARNING:

• Lithium batteries included for lights - adult attention for changing and disposal.
- Battery should only be replaced by an adult.
- Loose batteries could present a choking hazard and should be kept away from small children.
- Dispose of batteries properly.

Note: Batteries are not covered under the limited warranty.

WARNING: Wheelies and other stunt-type riding reduces your ability to maneuver and control your scooter. Take the necessary precautions, such as wearing appropriate protective gear, and practice in an area safe for stunt riding and free from obstructions.

PRODUCT PARTS

Keep your scooter running for years with genuine Razor parts. Visit our web site for more information on spare part availability. (Illustrations may not reflect exact appearance of actual product. Specifications subject to change without notice.)

1. Handlebars
2. Handlebar Grips
3. T-Bar
4. Collar Clamp
5. Headset
6. Fork
7. Wheels (Front/Rear)
   7-1. Axle Bolts (Front/Rear)
8. Brake
9. Battery Cover
10. Batteries (2) CR2032L 3V
11. Deck Cover
12. LED Lights
13. LED Light Button

WARRANTY

Razor Limited Warranty

The manufacturer warranties this product to be free of manufacturing defects for a period of 6 months from date of purchase. This Limited Warranty does not cover normal wear and tear, or any damage, failure or loss caused by improper assembly, maintenance, or storage.

This Limited Warranty will be void if the product is ever:

• used in a manner other than for recreation or transportation;
- modified in any way;
- rented.

The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.

Razor does not offer an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which it was purchased.

For your records, save your original sales receipt with this manual and write the serial number below.

CUSTOMER SERVICE CONTACT INFORMATION

Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed below:

UNITED STATES

Razor USA LLC

P.O. Box 3610

Cerritos, CA 90703

USA

[phone]

Monday - Friday

8:00 AM - 5:00 PM Pacific Time

EUROPE

Razor USA (Europe)

Handelsweg 2

2742 RD Waddinxveen

Netherlands

[phone]

ASIA

Razor USA (Asia)

P.O. Box 3610

Cerritos, CA 90703

USA

[phone]

[e-mail]

DISTRIBUTED IN THE UK BY:

Re:creation Limited

2 Meadows Business Park

Station Approach, Blackwater

Camberley, Surrey GU17 9AB

United Kingdom

[phone] Tel

[phone] Fax

[e-mail]

DISTRIBUTED IN AUSTRALIA BY:

Funtastic Limited

Level 2, Tower 2, Chadstone Place

1341 Dandenong Road

Chadstone VIC 3148

Australia

[phone]

Printed in China for Razor USA LLC.

Copyright © 2003-2014 Razor USA, LLC. All rights reserved. Razor® and the Razor logo design are among the registered trademarks of Razor USA LLC in the United States and/or select foreign countries. Party Pop™ is a trademark of Razor USA LLC. US_140605