TM652WB - Pregnant MTX Audio - Free user manual and instructions
Find the device manual for free TM652WB MTX Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 6.5-inch Coaxial Car Speaker |
| Model | TM652WB |
| Brand | MTX Audio |
| Speaker Size | 6.5 inches (165 mm) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 50 Watts |
| Power Handling (Peak) | 150 Watts |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 92 dB |
| Mounting Depth | 2.125 inches (54 mm) |
| Mounting Cutout | 5.625 inches (143 mm) |
| Cone Material | Polypropylene |
| Tweeter Type | 1-inch Silk Dome |
| Grille Included | Yes |
| Dimensions (Overall) | 6.75 x 6.75 x 3.5 inches (171 x 171 x 89 mm) |
| Weight (each) | 1.8 lbs (0.82 kg) |
| Woofer Magnet | Strontium Ferrite |
| Terminal Type | Push-type spring loaded |
| Mounting Hardware | Included |
| Recommended Amplifier Power | 15-100 Watts RMS per channel |
| Care Instructions | Clean with dry cloth; avoid moisture and solvents |
| Safety Notes | Disconnect power before installation; ensure secure mounting |
Frequently Asked Questions - TM652WB MTX Audio
What is the recommended amplifier power for the TM652WB?
The recommended amplifier power is 15-100 Watts RMS per channel. Avoid overdriving to prevent damage.
What is the mounting depth required for this speaker?
The mounting depth is 2.125 inches (54 mm). Ensure your vehicle door or panel has sufficient clearance.
Are grilles included with the TM652WB?
Yes, grilles are included and can be installed to protect the speaker.
What is the impedance of these speakers?
The impedance is 4 ohms, which is standard for most car audio systems.
Can I use these speakers in a marine environment?
No, the TM652WB is not marine-rated. Exposure to moisture may cause damage.
What tools are needed for installation?
You will need a screwdriver, wire strippers, possibly a drill for mounting screws, and panel removal tools.
Do these speakers come with installation hardware?
Yes, mounting screws and clips are included.
What is the typical frequency response of the TM652WB?
The frequency response is 50 Hz to 20 kHz, offering good bass and clear highs.
How do I clean these speakers?
Use a soft dry cloth to wipe the grille and cone. Do not use any liquids or abrasive cleaners.
Are replacement parts available for the TM652WB?
Replacement parts can be ordered through MTX Audio authorized dealers or their customer support.
User questions about TM652WB MTX Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual TM652WB - MTX Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TM652WB by MTX Audio.