PH-PSG01.EU - Smoke detector Zipato - Free user manual and instructions
Find the device manual for free PH-PSG01.EU Zipato in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | Zipato |
| Model | PH-PSG01.EU |
| Dimensions | 100 mm (diameter) x 40 mm (height) |
| Weight | 150 g (including battery) |
| Power Source | CR123A 3V Lithium Battery |
| Battery Life | Up to 2 years under normal conditions |
| Detection Technology | Photoelectric sensor |
| Alarm Sound Level | 85 dB at 3 meters |
| Connectivity | Z-Wave Plus (868.4 MHz EU) |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 5% to 95% non-condensing |
| Installation | Ceiling mount, hardware included |
| Test/Silence Button | Yes, on the device |
| LED Indicator | Red flash during alarm, green flash for normal |
| Low Battery Warning | Chirp every 40 seconds |
| End of Life Signal | Chirp pattern, replace after 10 years |
| Safety Certifications | EN 14604, CE |
| Maintenance | Clean with soft brush or vacuum monthly |
| Spare Parts | CR123A battery (user replaceable) |
| Warranty | 2 years limited |
Frequently Asked Questions - PH-PSG01.EU Zipato
How do I install the Zipato PH-PSG01.EU smoke detector?
Mount the detector on the ceiling using the included screws and anchors. Ensure it is at least 30 cm from any wall or corner. Insert the CR123A battery, then test the device by pressing the test button.
How do I test the smoke detector?
Press and hold the test/silence button until the alarm sounds (about 3 seconds). Release to stop. The alarm should sound loudly. If not, replace the battery.
How do I silence a false alarm?
Press the test/silence button once to temporarily silence the alarm for about 10 minutes. The detector will automatically reset after that period.
What battery does the PH-PSG01.EU use and how do I replace it?
It uses a CR123A 3V lithium battery. To replace, twist the detector counterclockwise to remove from base, open the battery compartment, replace the battery, then reattach the detector.
How often should I replace the battery?
Replace the battery at least once a year or immediately when the low battery chirp (every 40 seconds) is heard.
What does the LED indicator mean?
Green flash every 40 seconds indicates normal operation. Red flash during alarm indicates smoke detected. No flash or steady light indicates a fault.
Can I connect this detector to my smart home system?
Yes, the PH-PSG01.EU supports Z-Wave Plus. It can be paired with a Z-Wave hub for remote alerts and integration with other smart devices.
How do I clean the smoke detector?
Use a soft brush attachment on a vacuum cleaner to gently remove dust from the vents. Alternatively, wipe with a dry cloth. Do not use water or cleaners.
What should I do if the alarm sounds continuously?
Evacuate the premises immediately. If there is no smoke, press the test button to silence. Ensure the detector is not near steam or cooking. If false alarms persist, relocate the detector.
What is the lifespan of the smoke detector?
The detector has a lifespan of 10 years from manufacture date. An end-of-life chirp pattern will indicate it needs replacement. Replace the entire unit.
User questions about PH-PSG01.EU Zipato
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual PH-PSG01.EU - Zipato and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PH-PSG01.EU by Zipato.