SME.NCM631GB - Security Camera Zipato - Free user manual and instructions

Product Type	Indoor PTZ IP Camera
Brand	Zipato
Model	SME.NCM631GB
Image Sensor	1/4" CMOS, 1.0 Megapixel
Lens	f=2.6mm, F=2.0
View Angle	60°
Resolution	1280x720 (HD), 640x360, 320x180
Frame Rate	Up to 30 fps
Video Compression	H.264 / MJPEG
Night Vision	12 IR LEDs, auto switch (0 lux)
Pan / Tilt	Horizontal: 350°, Vertical: 90°
Audio	Two-way audio, built-in mic and speaker, AAC compression
Wireless	IEEE 802.11b/g/n, 150 Mbps, 2.4 GHz
Wireless Security	WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS
Network Protocols	TCP/IP, DHCP, FTP, SMTP, NTP, UPnP, HTTP, UDP/IP, DDNS, ONVIF, RTSP
Motion Detection	Alarm via email, FTP, and micro SD card recording
Storage	Micro SD card (cycled recording)
Power Supply	5V DC, <6W (adapter included)
Dimensions (WxHxD)	106 x 157 x 126 mm
Weight	Approx. 850 g
Operating Temperature	-10°C to 50°C
Storage Temperature	-40°C to 70°C
Humidity	10% – 90% (operating), 3% – 91% (storage)
Mounting	Wall mount bracket included
Warranty	1 year limited

Frequently Asked Questions - SME.NCM631GB Zipato

How do I install the Zipato SME.NCM631GB IP camera?

Connect the camera to power using the provided 5V DC adapter, then connect it to your router via Ethernet cable (if using Zipabox/Zipamini, ensure same network). For general use, consult the user guide on the included CD. For automation controllers, follow the 'Add new device' process in the Zipato Web GUI.

How do I connect the camera to Wi-Fi?

The camera supports WPS (Wi-Fi Protected Setup). Press the WPS button on the camera and on your router to establish a secure wireless connection. It also supports manual setup via WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK encryption.

What is the maximum resolution and frame rate?

The camera records at up to 1280x720 HD resolution at 30 frames per second. Lower resolutions (640x360, 320x180) are also available.

Can I use a micro SD card for local recording?

Yes, the camera supports micro SD cards for cycled recording. You can insert a card into the slot and configure motion-triggered or continuous recording.

How does the motion detection work?

Motion detection triggers alarms that can send snapshots or video clips via email or FTP, and also record to the micro SD card. You can configure sensitivity and notification methods through the camera's settings.

Does the camera support two-way audio?

Yes, the camera has a built-in microphone and speaker, enabling two-way audio communication. Audio is compressed using AAC for efficient streaming.

Can I control the camera remotely?

Yes, via the Zipato app (iOS, Android, Windows) or through the web interface, you can pan (350° horizontally), tilt (90° vertically), and zoom digitally. The camera supports DDNS for remote access over the internet.

What are the power requirements?

The camera requires a 5V DC power supply with less than 6W power consumption. Only use the provided power adapter to avoid damage.

Is the camera compatible with other smart home systems?

It supports ONVIF and RTSP protocols, making it compatible with many third-party NVRs and software. It also integrates seamlessly with Zipato automation controllers (Zipabox, Zipamini).

How do I reset the camera to factory settings?

To reset, press and hold the reset button (usually located on the device) for about 10 seconds until the LED blinks. This will restore default settings. Refer to the user manual for exact location.

USER MANUAL SME.NCM631GB Zipato

INDOOR PTZ IP CAMERA

QUICK INSTALLATION GUIDE v1.0

TRADEMARKS

Zipato and the Zipato logo are registered Trademarks. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies.

NOTICE

Although Zipato has attempted to ensure the accuracy of the content of this manual, it is possible that this document may contain technical inaccuracies, typographical, or other errors. Zipato assumes no liability for any error in this publication, and for damages, whether direct, indirect, incidental, and consequential or otherwise, that may result from such error, including, but not limited to loss of data or profits. Zipato provides this publication "as is" without warranty of any kind, either express or implied, including, but not limited to implied warranties of merchantability or fitness for a particular purpose. The published information in the manual is subject to change without notice. Zipato reserves the right to make changes in the product design, layout, and driver revisions without notification to its users. This version of the Installation guide supersedes all previous versions.

ELECTROMAGNETIC COMPATIBILITY

When operated according to manufacturer instructions, the product complies with all applicable CE harmonised standards from EMC Directive 2004/108/EC and Part 15 of the FCC Rules. The connections conducting HF signals must not be damaged or altered in any way by the user.

Display extreme caution when using ladders or steps, please follow manufacturer's instructions. Be careful when using hand and power tools and follow the manufacturer's guidelines when using them. Take care that the correct tools are used. Wear goggles or protective clothing where required.

④ ELECTRICAL SAFETY

All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 5V DC in the IEC60950-1.

Please note: Do not connect different power supply to the device from what you received with your camera, it may result in device damage! We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.

④ CAUTION

Do not apply power to the camera before completing installation. Please install the proper power cut-off device during the installation connection.

INTRODUCTION

Zipato PTZ IP Camera combines Full HD video recording with wireless and cloud connectivity to bring detailed video of your home whenever you are, over local network the Internet, via connected device of your choice (iOS, Android and Windows free apps are available). Pan-tilt-zoom mechanism with remote directional and zoom control makes sure that every corner of your room is covered. As a part of Zipato Smart Monitoring Kit, you can use it to see live and recorded video upon any alarm event and get attached video on alert. Additionally, it can be part of virtually limitless automation scenarios you can create by using Zipato Rule Creator.

OVERVIEW

→ PACKAGE CONTENT

1PC IP Camera

1PC WiFi antenna

1PC CD

1PC Power adapter

1PC Mounting bracket set

1PC RJ45 cable

1PC Quick installation guide

1PC Warranty card

FEATURES

■ 1.0 Mega Pixel lens, f=3.6mm, F=2.0, 1/4" HD sensor
Dual Stream, H.264/MJPEG video Compression
Day/Night Surveillance, 12 PCS IR LEDs On/Off Auto Switch
Pan, tilt, zoom supported
■ Supports DDNS connection
■ Motion Detection alarm via E-Mail, FTP and Micro SD
■ Upload Video Records to FTP and SD
■ Supports SD Card cycled Recording
■ Free DDNS Service Embedded
■ Support PIR detection
■ Supports WPS - One Button Push Secure Wireless Connection
■ Supports IEEE 802.11n Wireless Connection
■ Supports WEP, WPA and WPA2 Encryption
■ Supports two-way Audio, built-in MIC and speaker
■ Support ONVIF and RTSP protocol
Indoor use

SPECIFICATION

■ Power supply / Power consumption 5V DC, <6W ■ Network Wireless speed: IEEE802.11b/g/n 150Mbps

Operating Frequency: 2.4 GHz
Channel: 1 - 13
Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
WPS - One key configure WiFi
Imageperformance
Resolution: 1280x720, 640x360, 320x180
Lens: f=3.6mm F=2.0
Image sensor: 1//" CMOS sensor
View angle: 60 degree
IR. Cut filter
Softwarefeatures
Protocols & standards: TCP/IP, DHCP, FTP, SMTP, NTP.
UPNP,HTTP,UDP/IP,DDNS P2P
Image compression: H 264/MJPEG
Maximal frame rate: 30 fps
Code rate: 256kbps - 2048Mbps
Account permissions: Three Level
Motion detection: Send alarm pictures or video to email/FTP/
MicroSD

Audio

Two-way audio

Auido compression standard: AAC

Pan/Tilt

Horizontal: 350°

Vertical: 90°

Environmentparamaters

Operating temperature: -10°C \~ 50°C

Storage temperature: -40°C \~ 70°C

Operating Humidity: 10% \~ 90%

Storage Humidity: 3% - 90%

Dimensions

106×117×126 mm

Weigh

Camera:

Packaging:

1. 2018年5月

MODELS AND REGIONS

NOTICE: Follow below procedure only if you own Zipabox, Zipamini or other automation controllers from Zipato. This manual is intended exclusively for owners of above mentioned automation controllers manufactured by Zipato.

For general usage of this device, outside of Zipato network, please consult electronic version of User Guide provided on compact disk which is included in the packaging.

1 | Connect your IP Camera to the power supply with provided power adapter
2 | Connect the camera with provided Ethernet cable to your network router. Your Zipabox or Zipamini main controller should be joined in the same network.
3 | Under Device Manager tab on the left side of Zipato Web GUI, click on 'Add new device'
4 | In newly opened window, click on 'IP Camera', and discovery process will be started automatically. Your camera should appear on list of devices, meaning it is added to Zipato network successfully.
5 | Once the camera is added to the list, click on Sync button and reload the dashboard to see the camera in device browser.

TROUBLESHOOTING

Having trouble installing your new product?

Zipato's website contains the latest user documentation and software updates for Zipato products and services: www.zipato.com

—

You can also find answers in the Zipato Community at: community.zipato.com

Zipato Support: [e-mail]

LIMITED PRODUCT WARRANTY

GENERAL TERMS

Nothing in this Limited Product Warranty affects your statutory rights as a consumer.

The Limited Product Warranty set forth below is given by Tri plus grupa d.o.o. [Europe] (herein referred to as "ZIPATO"). This Limited Product Warranty is only effective upon presentation of the proof of purchase. Upon further request by ZIPATO, this warranty card has to be presented, too.

EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, ZIPATO MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ZIPATO EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER'S SOLE AND EXCLUSIVE REMEDIES AGAINST ZIPATO. THEY DO NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU HAVE AGAINST THE BUSINESS YOU GOUGHT A ZIPATO PRODUCT FROM. IN NO EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. HOWEVER, NOTHING IN THIS AGREEMENT LIMITS ZIPATO'S LIABILITY TO YOU (I) IN THE EVENT OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING FROM ZIPATO'S NEGLIGENCE, OR (II) TO THE EXTENT RESULTING FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART OF ZIPATO, OR (III) TO THE EXTENT ARISING UNDER PART 1 OF THE CONSUMER PROTECTION ACT 1987 OF THE UNITED KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW: (I) A DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR (3) LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS. This Limited Product Warranty applies to ZIPATO branded hardware products (collectively referred to as "ZIPATO Hardware Products") sold by ZIPATO [Europe], its European subsidiaries, affiliates, authorized resellers, or country distributors (collectively referred to as "ZIPATO Resellers") with this Limited Product Warranty.

The term "ZIPATO Hardware Product" is limited to the hardware components and all its internal components including firmware. The term "ZIPATO Hardware Product" DOES NOT include any software applications or programs.

GEOGRAPHICAL SCOPE OF THE LIMITED PRODUCT WARRANTY

This Limited Product Warranty is applicable to Hardware Products sold by Zipato Resellers in all countries listed at the beginning of this document under the heading "Countries in which this ZIPATO Limited Product Warranty applies". The Limited Product Warranty will be honored in any country where ZIPATO or its authorized service providers offer warranty service subject to the terms and conditions set forth in this Limited Product Warranty. However, warranty service availability and response times may vary from country to country and may also be subject to registration requirements.

LIMITATION OF PRODUCT WARRANTY

ZIPATO warrants that the products described below under normal use are free from material defects in materials and workmanship during the Limited Product Warranty Period set forth below ("Limited Product Warranty Period"), if the product is used and serviced in accordance with the user manual and other documentation provided to the purchaser at the time of purchase (or as amended from time to time).

ZIPATO does not warrant that the products will operate uninterrupted or error-free or that all deficiencies, errors, defects or non-conformities will be corrected.

This warranty shall not apply to problems resulting from: (a) unauthorized alterations or attachments; (b) negligence, abuse or misuse, including failure to operate the product in accordance with specifications or interface requirements; (c) improper handling; (d) failure of goods or services not obtained from ZIPATO or not subject to a then-effective ZIPATO warranty or maintenance agreement; (e) improper use or storage; or (f) fire, water, acts of God or other catastrophic events. This warranty shall also not apply to any particular product if any ZIPATO serial number has been removed or defaced in any way.

ZIPATO IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR FAILURE TO FOLLOW THE INSTRUCTIONS FOR THE ZIPATO HARDWARE PRODUCT.

LIMITED PRODUCT WARRANTY PERIOD

The Limited Product Warranty Period starts on the date of purchase from ZIPATO. Your dated sales or delivery receipt, showing the date of purchase of the product, is your proof of the purchase date. You may be required to provide proof of purchase as a condition of receiving warranty service. You are entitled to warranty service according to the terms and conditions of this document if a repair to your ZIPATO branded hardware is required within the Limited Product Warranty Period.

[Other than in respect of products for domestic use (in particular those listed in the first and last boxes in the table below), this Limited Product Warranty extends only to the original end user purchaser of this ZIPATO Hardware Product and is not transferable to anyone who obtains ownership of the ZIPATO Hardware Product from the original end-user purchaser.

PRODUCT WARRANTY PERIOD TABLE

PRODUCT TYPE	Indoor PTZ IP Camera
PRODUCT WARRANTY PERIOD	One (1) year

IMPORTANT

The content of "Product Type" listed above is subject to change; please refer to the www.zipato.com for latest update.

PERFORMANCE OF THE LIMITED

PRODUCT WARRANTY

If a product defect occurs, ZIPATO's sole obligation shall be to repair or replace any defective Zipato Hardware Product free of charge provided it is returned to an Authorized ZIPATO Service Centre during the Limited Warranty Period. Such repair or replacement will be rendered by ZIPATO at an Authorized ZIPATO Service Centre. All component parts or hardware products that are replaced under this Limited Product Warranty become the property of ZIPATO. The replacement part or product takes on the remaining Limited Warranty Period of the replaced part or product. The replacement product need not be new or of an identical make, model or part; ZIPATO may in its discretion replace the defective product (or any part thereof) with any reconditioned equivalent (or superior) product in all material respects to the defective product.

WARRANTOR

Tri plus grupa d.o.o. TEL [phone]

Banjavciceva 11 FAX [phone]

10 000 Zagreb

CROATIA

DECLARATION OF CONFORMITY

CE

The manufacturer Tri plus grupa d.o.o declares under our sole responsibility that the product:

Marketing model: Indoor PTZ IP Camera

Regulatory model: sme.NCM631GB

Trade/Brand name: Zipato

is in conformity with the Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC and R&TTE Directive 1995/5/EC and carries the CE marking accordingly.

The following harmonized standards were applied:

ETSI EN 301 489-1 V1.9.2 (2001-09)

ETSI EN 301 489-17 V2.2.1 (2012-09)

ETSI EN 300 328 V1.8.1 (2012-06)

EN 62479:2010

EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Changes or modifications not expressly approved by Tri plus grupa d.o.o. for compliance could void the user's authority to operate the equipment.

FC

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

Operation is subject to the following two conditions:

1 | this device may not cause harmful interference, and

2 | this device must accept any interference received, including interference that may cause undesired operation.

NOTE: Changes or modifications not expressly approved by Zipato for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help.

DISPOSING AND RECYCLING YOUR PRODUCT

When it reaches end of life, dispose of the product according to your local environmental laws, guidelines and regulations.

This symbol on the product or packaging means that according to local laws and regulations needs to be disposed of separately from household waste. Once this product has reached the end of its life, please take it to a collection point (recycle facilities) designated by your local authorities, some will accept your product for free or simply drop it off at your Zipato re-seller store.

By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. At Zipato, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimize this impact Zipato designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging.

COPYRIGHT

© 2015 Tri plus grupa d.o.o. All Rights Reserved.

No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of Tri plus grupa d.o.o.