HDC560 - Security Camera Clover Electronics - Free user manual and instructions

Product Type	Day & Night Color Security Camera
Image Sensor	1/3" Sony Super HAD CCD, 811H x 508V pixels
Effective Pixels	768H x 494V
Horizontal Resolution	560 TV lines
Lens	DC Auto Iris Vari-focal 4-9mm
Minimum Illumination	0.01 Lux @F1.2
Infrared LEDs	78 IR LEDs with CDS sensor, range up to 120'
Video Output	Composite 1.0Vp-p @75 Ω
S/N Ratio	More than 50dB (AGC off)
Weatherproof Rating	IP67
Construction	Rugged steel
Power Supply	DC 15V, 1.5A (supplied AC adapter)
Current Consumption	650mA max @DC15V
Operating Temperature	-10°C to 50°C
Dimensions	930 x 230 mm (camera with bracket)
Weight	2.9 lbs
Cable Length	100' 6pin Din cable (included)
Mounting	Wall or ceiling mount with universal bracket
Package Contents	Camera, 100' cable, AC adapter, BNC-to-RCA adapter, hardware kit, manual, warranty card
Warranty	2 years limited (parts and labor)
Safety Precautions	Avoid electrical shock: do not open case; use only supplied adapter; keep from magnetic fields and direct sunlight
Cleaning	Clean lens with soft, clean cloth if stained

Frequently Asked Questions - HDC560 Clover Electronics

What power supply should I use for the HDC560 camera?

Use only the supplied AC adapter (DC 15V, 1.5A). Using other adapters may damage the camera.

How do I mount the camera on a wall or ceiling?

Attach the base ring to a stud or joist with screws, then attach the mounting bracket and secure with the locking ring. Adjust the pivot locking screw to set the angle.

What is the maximum cable length for the camera?

The total cable length (including the supplied 100' cable) must not exceed 200'.

Why is there no video from the camera?

Check the AC adapter connection and the video cable between the camera and monitor. Ensure the adapter is plugged in and the cables are securely connected.

How do I adjust the viewing angle of the camera?

Use the vari-focal lens: loosen the locking screw and turn the zoom ring (T↔W) to set focal length (4-9mm), then adjust the focus ring and secure the screws.

What should I do if the image is dark or dim?

Adjust the brightness or contrast on your monitor. If the lens is dirty, clean it with a soft, clean cloth.

Can the camera be used outdoors?

Yes, the camera is weatherproof with an IP67 rating, making it suitable for outdoor use. Avoid direct sunlight or strong reflected light.

What is the infrared range of the HDC560?

The camera has 78 IR LEDs providing up to 120 feet of night vision, depending on scene reflection.

Why does the image flicker?

The camera may be facing direct sunlight or fluorescent light. Change the camera position to reduce flickering.

How do I obtain warranty service?

Fill out the warranty card and mail it with model number, serial number, and purchase date. Pack the camera securely and send prepaid and insured to Clover Electronics. Include $25 for return postage. For out-of-warranty repairs, you will receive an estimate.

USER MANUAL HDC560 Clover Electronics

Copyright © 2007 Clover Electronics U.S.A. All Rights Reserved.

PRECAUTIONS

• To avoid electrical shock, do not open the case of this product.
- Operate this product using only the supplied AC Power supply.
- Do not overload electrical outlets or extension cords; this can result in fire or electric shock.
- Keep this product away from strong magnetic fields.
- Do not expose this product in direct sunlight or strong reflected rays.
• Refer servicing to qualified personnel only.
- Do not change or modify this product, the warranty will be voided.

FEATURES

• Weatherproof (IP67)
  • 1/3" Sony Super HAD CCD
  • High Resolution 560 TV Lines
  • Rugged Steel Construction
  • Total 78 Infrared LEDs with a CDS sensor
• Up to 120' IR range (depends on scene reflection)
  • DC Auto Iris Vari-focal Lens (4-9mm)
• Attached Universal Mounting Bracket and 100' cable
• DC12V Power Source

INSTALLATION

1. Attach the mounting bracket base ring① to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the bracket base ring using the supplied screws. Attach the mounting bracket② to the base ring① and secure them using the supplied screws.
2. Lock the mounting bracket with the locking ring③.
3. Turn the pivot locking screw ^④ with the provided hex-head wrench counterclockwise to set the desired angle of camera toward objects and turn it clockwise to secure. It can be used for wall-mount or ceiling-mount application depending on setting this pivot locking screw.
4. Loosen the locking screw ^⑤ with the provided hex-head wrench and turn the camera clockwise or counter-clockwise to upright images on the screen and turn it clockwise to secure.
5. Connect the one end of 100' cable (supplied) to the Din jack of 5' cable attached to the camera. Make sure that two arrows on the top of them should be aimed at each other. Connect the other end (BNC or RCA) of cable to the video devices such as

DVR, monitor/TV. Plug the provided AC adapter to the DC jack (red) of the end of 100' cable.

CEILING - MOUNT

WALL - MOUNT

HOW TO ADJUST ANGLE OF VIEW

1. Vari-focal lens①

Easily changeable angle of view: 4 to 9mm

1. T↔W (Tele ↔ Wide)②

Loosen the locking screw③ with a (-) driver (not included) and turn this adjustment ring② clockwise or counter-clockwise to set the focal length. Secure the locking screw③ after setting.

1. N④

Loosen the locking screw⑤ with a (-) driver (not included) and turn this adjustment ring④ clockwise or counter-clockwise to set the focus. Secure the locking screw⑤ after setting.

Note:

■ Apply the provided AC adapter only.
- The total length of cable must not exceed 200' including extension cable.

TROUBLE SHOOTING

If the camera does not function properly, check the following points before contacting the service center.

Troubles	Remedies
No video Check the AC adapter and video	cablebetween the camera and a monitor
The image on the screen is dark Check the	brightness control on the monitor
The image on the screen is dim Check if the lens is stained. If dirty, clean it with soft and clean cloth
The camera is not working properly, and the surface of the camera case is hot	Check if you have connected the provided AC adapter
The contrast on the screen is too weak Adjust	just the contrast feature of the monitor. If the camera is exposed under too strong light, change the position
The image on the screen flickers Does the	camera face to directly to the sunlight or fluorescent light? Change the camera position
Picture rolls and jumps, scrambled picture	Improper V-hold control. Setting on your monitor
Picture smaller than screen House current	may be too low

SPECIFICATIONS

- Image sensor 1/3" Sony Super HAD CCD, 811H x 508V

- Effective pixels 768H x 494V

- Scanning system 525 lines, 2:1 interlace

• Horizontal resolution 560 TV lines

- Shutter speed Auto, Manual (1/60 to 1/120,000 sec)

- Sync. System Internal

• S/N ratio more than 50db (AGC off)

• Minimum illumination 0.01 Lux @F1.2

• Video output Composite 1.0Vp-p @75 Ω

- AGC Auto

• Digital Noise Reduction Auto

- White balance Auto

- Lens DC Auto Iris Vari-focal Lens 4mm to 9mm

- Current consumption 650mA Max @DC15V

- Power supply DC 15V, 1.5A

- Operating temperature -10°C to 50°C

- Dimensions 930 x 230(L) mm

- Weight 2.9 Lbs

LIMITED 2 YEAR WARRANTY

This warranty gives the original purchaser specific legal rights and you may also have other rights, which vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair free of charges for 2 years on parts and labor from the date of original purchase. This warranty does not cover modification, abuse, incidental or consequential damages unless the state of owner's residence specially prohibits limitations on incidental or consequential damages.

HOW TO OBTAIN FACTORY SERVICE

1. Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase.
2. We will repair or replace, and return to the owner the system under this limited warranty.
3. Please pack the system carefully and securely using the original packing materials, and send it prepaid and insured to: 13073 E. 166 ^th St, Cerritos, CA 90703.
4. Please include a check for \$25.00 to cover the cost of return postage and handling. If the system is returned within the warranty period, please include a proof of purchase. If the system is out of warranty, you will receive an estimate of the repair cost for your approval before repair work will be begun.

AVAILABLE ACCESSORIES

CDR4010

Stand-alone

4 CH Digital Video Recorder (DVR).

CDR4170

Stand-alone

4 CH Digital Video Recorder (DVR).

CDR1610

Stand-alone

16 CH Digital Video Recorder (DVR).

CDR0850

Stand-alone

8 CH Digital Video Recorder (DVR).

CA100H 100' 6pin Din Extension cable

PACKAGE INCLUDES

1-Day & Night Color Camera
1-100' 6pin Din Cable
1-UL Approved AC Adapter
1-BNC to RCA Adapter
1-Hardware Accessories Kit
1-Instruction Manual
1-Warranty Registration Card