RNX-N600UBE - Wi-Fi repeater Rosewill - Free user manual and instructions
Find the device manual for free RNX-N600UBE Rosewill in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Model Number | RNX-N600UBE |
| Brand | Rosewill |
| Wireless Standard | 802.11 b/g/n |
| Frequency Band | Dual Band 2.4GHz & 5GHz |
| Maximum Data Rate | 300 Mbps on each band (total 600 Mbps) |
| Dimensions (L x W x H) | 100 x 60 x 30 mm |
| Weight | 0.1 kg |
| Power Supply | USB powered (5V/1A) via micro USB cable |
| Operating Modes | Repeater, Access Point |
| Security Encryption | WEP, WPA, WPA2 |
| Antenna Type | Internal dual-band antennas |
| Ports | 1 x Ethernet RJ-45 (10/100 Mbps) |
| LED Indicators | Power, WLAN, WPS, LAN |
| Buttons | WPS/Reset button |
| Compliance | FCC, CE |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Package Contents | Wi-Fi Repeater, Micro USB cable, Quick Installation Guide |
| Maintenance & Cleaning | Wipe with a dry cloth; avoid liquids |
| Safety | Do not expose to water, heat sources or direct sunlight |
| Spare Parts & Repairability | No user-serviceable parts; contact support for issues |
Frequently Asked Questions - RNX-N600UBE Rosewill
How do I set up my Rosewill RNX-N600UBE repeater?
Plug the repeater into a power outlet near your router. Press the WPS button on your router, then within 2 minutes press the WPS button on the repeater. The LEDs will indicate a successful connection. Alternatively, you can configure it via the web interface using a browser.
What do the LEDs on the device indicate?
The Power LED shows if the device is on. The WLAN LED indicates wireless activity. The WPS LED flashes during WPS pairing. The LAN LED lights when an Ethernet device is connected.
Can I use this repeater as an access point?
Yes, the RNX-N600UBE supports Access Point mode. Connect it via Ethernet to your router and configure it through the web interface to act as a wired access point.
What is the maximum range of the RNX-N600UBE?
The range depends on your environment, but typically up to 100 meters in open space. Walls and interference may reduce the range. The dual-band design helps minimize congestion.
Does it support both 2.4GHz and 5GHz simultaneously?
Yes, it is a dual-band repeater. It can extend both bands at the same time, providing better performance and flexibility for your devices.
How do I reset the Rosewill RNX-N600UBE to factory defaults?
Locate the WPS/Reset button on the device. Press and hold it for about 10 seconds until the LEDs flash quickly, then release. The device will reboot with factory settings.
Why is my repeater not connecting to the router?
Ensure the repeater is within range of your router. Check that you entered the correct Wi-Fi password. Try moving the repeater closer to the router and retry WPS or manual setup.
Can I connect wired devices to the repeater?
Yes, the RNX-N600UBE has one Ethernet port. You can connect a device like a gaming console or PC directly to the repeater for a stable wired connection.
Is the RNX-N600UBE compatible with all routers?
It is compatible with any standard 802.11 b/g/n wireless router. It works with most brands and models, including those from Rosewill, Linksys, Netgear, TP-Link, etc.
What should I do if the repeater overheats?
Ensure the repeater is placed in a well-ventilated area away from direct sunlight and heat sources. Do not cover the device. If it continues to overheat, unplug it and contact support.
User questions about RNX-N600UBE Rosewill
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual RNX-N600UBE - Rosewill and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RNX-N600UBE by Rosewill.