PS-1210Un - Print Server Edimax - Free user manual and instructions
Find the device manual for free PS-1210Un Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-port USB 2.0 Print Server |
| Brand | Edimax |
| Model | PS-1210Un |
| Dimensions (approx.) | 6.0 x 5.0 x 2.5 cm |
| Weight (approx.) | 50 g |
| Power Source | USB bus power or external 5V DC adapter (optional) |
| Network Interface | 10/100Mbps Fast Ethernet (RJ-45) |
| USB Port | 1x USB 2.0 Type B |
| Supported Protocols | TCP/IP, IPP, SMB, LPR, RAW, etc. |
| Operating Systems | Windows, macOS, Linux |
| Management | Web-based configuration, utility software |
| Main Functions | Share USB printer over network, support multiple printing protocols, firmware upgrade |
| Maintenance | Keep firmware updated; clean with dry cloth; avoid moisture |
| Safety | CE, FCC compliant; use only specified power adapter |
| Spare Parts & Repairability | No user-serviceable parts; contact support for issues |
| General Information | Compatible with most USB printers; plug and play setup |
Frequently Asked Questions - PS-1210Un Edimax
How do I set up the Edimax PS-1210Un?
Connect the print server to your network via Ethernet cable, then plug the printer into its USB port. Use the included utility software or web interface to configure network settings and assign an IP address.
Does the PS-1210Un support wireless printing?
No, this model is wired only. It connects to your network via Ethernet and does not have built-in Wi-Fi.
Which printers are compatible?
The PS-1210Un supports most USB printers that use standard printer languages (PCL, PostScript, etc.). Check Edimax's compatibility list for specific models.
Can I use this print server with macOS?
Yes, it supports macOS. You can configure it via web interface or Bonjour discovery. Use IPP or LPR protocols for printing.
How do I assign a static IP address?
Access the web interface by entering the print server's IP (default 192.168.1.1 or find via utility). Navigate to Network Settings and set a static IP according to your subnet.
Why is my printer not detected?
Ensure the printer is powered on and properly connected. Verify the USB cable is not faulty. Try a different USB port. Reset the print server by pressing the reset button for 10 seconds.
How do I reset the PS-1210Un to factory defaults?
Press and hold the reset button (small pinhole) on the device for about 10 seconds until the status LED blinks rapidly. Release and wait for reboot.
Can I update the firmware?
Yes. Download the latest firmware from Edimax's support site. Access the web interface, go to Administration > Firmware Upgrade, and upload the file. Do not power off during upgrade.
What is the default login and password?
Default username is 'admin' and password is '1234' (or blank). It is recommended to change the password after initial setup.
Does it support IPv6?
Yes, the PS-1210Un supports both IPv4 and IPv6. You can configure IPv6 settings in the web interface under Network > IPv6.
User questions about PS-1210Un Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Print Server in PDF format for free! Find your manual PS-1210Un - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS-1210Un by Edimax.
