ES-5104PH - Network switch Edimax - Free user manual and instructions
Find the device manual for free ES-5104PH Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Edimax |
| Model | ES-5104PH |
| Ports | 5 x 10/100 Mbps Fast Ethernet (4 PoE + 1 Uplink) |
| PoE Standard | IEEE 802.3af/at (Power over Ethernet) |
| PoE Power Budget | Up to 60 W total, 15.4 W per port (802.3af) or 30 W per port (802.3at) |
| Switching Capacity | 1 Gbps |
| MAC Address Table | 1K entries |
| Dimensions (W x D x H) | Approx. 160 x 100 x 28 mm (6.3 x 3.9 x 1.1 inches) |
| Weight | Approx. 0.5 kg (1.1 lbs) |
| Power Supply | External power adapter, input: 100-240V AC, output: 48V DC |
| Power Consumption | Max 75 W (with PoE load) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| LED Indicators | Power, Link/Act, PoE status per port |
| Mounting | Desktop or wall-mountable |
| Fanless Design | Yes (silent operation) |
| Certifications | FCC, CE |
| Warranty | 3 years limited |
Frequently Asked Questions - ES-5104PH Edimax
How do I reset the Edimax ES-5104PH to factory defaults?
To reset the switch, unplug the power, then press and hold the reset button (if available) while reconnecting power, and hold for 10 seconds. If no reset button, perform a power cycle (unplug and wait 30 seconds).
What PoE devices are compatible with the ES-5104PH?
The switch supports IEEE 802.3af/at PoE devices such as IP cameras, VoIP phones, wireless access points, and other low-power network devices up to 30W per port.
Can I use the uplink port as a regular PoE port?
Yes, the uplink port on the ES-5104PH is a standard 10/100 Mbps port that also provides PoE power if needed.
Does the switch support VLAN or managed features?
The ES-5104PH is an unmanaged switch, so it does not support VLAN, QoS, or other managed features. It operates plug-and-play.
What is the maximum cable length for Ethernet connections?
The maximum cable length for 10/100 Mbps Ethernet is 100 meters (328 feet) when using standard Cat5e or higher cabling.
How can I check if a PoE port is delivering power?
Each PoE port has a dedicated LED indicator. When the LED is solid green, power is being supplied. If off, check device compatibility or cable connection.
Can I connect the switch to a 1000 Mbps (Gigabit) network?
Yes, but the switch only supports 10/100 Mbps speeds. Connected devices will operate at 100 Mbps maximum. For gigabit speeds, a different switch is required.
What power adapter does the ES-5104PH use?
The switch uses an external power adapter with input 100-240V AC and output 48V DC. The amperage rating should be at least 1.5A (adjust based on power budget).
Is the switch suitable for outdoor installation?
The ES-5104PH is designed for indoor use only. Operating temperature is 0°C to 40°C. For outdoor use, protect it in a weatherproof enclosure.
How do I clean and maintain the switch?
Unplug the switch before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquids or sprays. Ensure vents are free from dust for proper ventilation.
User questions about ES-5104PH Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual ES-5104PH - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES-5104PH by Edimax.