GS-1026 V2 - Network switch Edimax - Free user manual and instructions
Find the device manual for free GS-1026 V2 Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Network switch |
| Model | GS-1026 V2 |
| Brand | Edimax |
| Ports | 24 x 10/100/1000 Mbps RJ-45 + 2 x Gigabit SFP combo |
| Switching capacity | 52 Gbps |
| MAC address table | 8K entries |
| Jumbo frame support | 9K bytes |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (19-inch rack mountable) |
| Weight | 2.5 kg |
| Power supply | Internal AC 100-240V, 50-60Hz, 0.5A |
| Power consumption | 20W maximum |
| Cooling method | Fanless, passive cooling |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED indicators | Power, Link/Act per port |
| Mounting | Rack-mountable ears included |
| Compliance | FCC, CE, RoHS |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - GS-1026 V2 Edimax
How do I connect the Edimax GS-1026 V2 to my network?
Connect one end of an Ethernet cable to a router or modem, and the other end to any RJ-45 port on the switch. Then connect your devices (computers, printers, etc.) to the remaining ports. The switch will automatically detect and negotiate speeds.
What do the LEDs on the front panel indicate?
The power LED indicates the switch is receiving power. Each port has a Link/Act LED: solid green means a valid connection, blinking indicates activity.
Can this switch be mounted in a server rack?
Yes, the GS-1026 V2 comes with rack-mount ears and can be installed in a standard 19-inch rack. Ensure proper ventilation.
What is the maximum cable length supported?
For Gigabit Ethernet, the maximum cable length is 100 meters (328 feet) using Cat5e or better cabling.
Is the switch plug-and-play? Does it require configuration?
Yes, it is an unmanaged switch, so it works out-of-the-box with no configuration needed. Just connect power and cables.
How can I reset the switch to factory defaults?
Unmanaged switches typically have no reset button. If needed, power cycle the switch by unplugging and replugging the AC adapter.
Does the GS-1026 V2 support VLAN or QoS?
No, this is an unmanaged switch. It does not support VLAN, QoS, or management features. For those, consider a managed switch.
What power adapter does this switch use?
The switch has an internal power supply. Use the included power cord or one compatible with AC 100-240V, 50-60Hz.
Can I use SFP modules in the combo ports?
Yes, the two combo ports support standard Gigabit SFP modules (e.g., 1000BASE-SX or LX). Note that using the SFP port disables the corresponding RJ-45 port.
Is the switch fanless? How do I ensure adequate cooling?
Yes, the GS-1026 V2 is fanless for silent operation. Ensure the ventilation slots are not blocked and keep the switch in a well-ventilated area.
User questions about GS-1026 V2 Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual GS-1026 V2 - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS-1026 V2 by Edimax.