ES-5240G+ V3 - Network switch Edimax - Free user manual and instructions
Find the device manual for free ES-5240G+ V3 Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Ports | 24 x 10/100/1000 Mbps Gigabit Ethernet + 2 x Combo SFP |
| Switching Capacity | 48 Gbps |
| MAC Address Table | 8K Entries |
| Jumbo Frame Support | 9K Bytes |
| VLAN Support | Yes, IEEE 802.1Q VLAN |
| Quality of Service (QoS) | Yes, IEEE 802.1p |
| IGMP Snooping | Yes |
| Port Mirroring | Yes |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | AC 100-240V, 50/60Hz, internal power supply |
| Power Consumption | Max 20W |
| Cooling | 1 x Internal Fan |
| LED Indicators | Power, Link/Act (per port), Speed |
| Installation | Rackmount (brackets included) or Desktop |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 70°C (14°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| Safety and Emissions | CE, FCC Class A |
| Warranty | 3 Years |
| Cleaning | Use a soft, dry cloth. Do not use liquids or sprays. |
| Maintenance | No user-serviceable parts. Contact authorized service center for repairs. |
| Reparability | Spare parts available through authorized distributors. Refer to user manual for details. |
Frequently Asked Questions - ES-5240G+ V3 Edimax
How do I reset the Edimax ES-5240G+ V3 to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until all LEDs flash. The switch will reboot with factory settings.
Can I mount the switch in a rack?
Yes, the switch comes with rackmount brackets. Attach them to the sides and secure the switch in a standard 19-inch rack.
What is the maximum cable length for Ethernet ports?
For Gigabit Ethernet, the maximum cable length is 100 meters (328 feet) using Cat5e or higher UTP cable.
Does the switch support VLAN?
Yes, it supports IEEE 802.1Q VLAN, allowing you to segment your network for improved security and performance.
How do I configure the switch?
The Edimax ES-5240G+ V3 is an unmanaged switch, so it works plug-and-play with no configuration needed. For advanced settings (if supported in your model), use the web interface via a connected PC.
What do the LED indicators mean?
Power LED: solid green means power on. For each port: solid green means link established, blinking means activity; off means no link. Speed LED: solid green indicates 1000Mbps, amber for 100Mbps, off for 10Mbps.
Can I use the SFP ports for fiber connection?
Yes, the two combo SFP slots support standard 1000Base-SX/LX SFP modules for fiber optic connections.
What should I do if the switch gets too hot?
Ensure the switch has adequate ventilation. Keep it in a cool environment with good airflow. Avoid stacking devices on top of it.
How do I update the firmware?
This unmanaged switch does not require firmware updates as it operates transparently. If you have a managed version, check the official Edimax website for firmware.
Is the switch compatible with PoE?
The Edimax ES-5240G+ V3 does not support Power over Ethernet (PoE). Use separate PoE injectors if needed.
User questions about ES-5240G+ V3 Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual ES-5240G+ V3 - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES-5240G+ V3 by Edimax.