WLA-500AP - Router AIRLIVE - Free user manual and instructions
Find the device manual for free WLA-500AP AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | AirLive |
| Model | WLA-500AP |
| Dimensions (W x D x H) | 150 x 100 x 30 mm |
| Weight | 200 g |
| Power Supply | 5V DC, 1A |
| Ethernet Ports | 1x WAN, 4x LAN (10/100 Mbps) |
| Wireless Standard | IEEE 802.11b/g |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 54 Mbps |
| Antenna Type | 2 external antennas (detachable) |
| Security | WEP, WPA, WPA2 |
| Management | Web-based interface (HTTP) |
| Reset | Factory reset button on back panel |
| LED Indicators | Power, WAN, LAN (1-4), WLAN |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Keep in ventilated area; clean with dry cloth |
| Safety | Use only supplied power adapter; do not disassemble |
| Spare Parts & Repairability | Not user-serviceable; contact support for repairs |
Frequently Asked Questions - WLA-500AP AIRLIVE
How do I reset the AirLive WLA-500AP to factory defaults?
Press and hold the reset button on the back panel for about 10 seconds using a paperclip until the Power LED flashes. Release the button. The router will reboot with factory settings.
What is the default IP address to access the router's web interface?
The default IP address is 192.168.1.1. Make sure your computer is set to obtain an IP address automatically.
What are the default login credentials?
The default username and password are both admin (case-sensitive). If changed, use the reset procedure to restore defaults.
How do I configure the wireless network on the WLA-500AP?
Log into the web interface, go to Wireless settings. Set your SSID (network name), security type (e.g., WPA2-PSK), and passphrase. Save and reboot the router.
Can I update the firmware?
Yes. Download the latest firmware from the AirLive support website. Log into the web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What is the maximum wireless range?
Indoor range is typically up to 30-50 meters, depending on obstacles. Outdoor range may be up to 100 meters. Actual performance varies by environment.
Can I use the WLA-500AP as a wireless bridge?
Yes. The router supports bridge mode. Go to Wireless > Bridge settings, enable bridge mode, and enter the MAC address of the other bridge device. Ensure both devices have same SSID and channel.
What power consumption does the router have?
The router consumes approximately 5 watts when idle, and up to 8 watts during heavy traffic. It uses a 5V DC, 1A adapter.
Is the WLA-500AP compatible with 802.11n devices?
Yes, but only at 802.11b/g speeds (up to 54 Mbps). 802.11n devices will connect but operate in legacy mode, so performance will be limited to 54 Mbps.
What should I do if I forget the router password?
Perform a factory reset by holding the reset button for 10 seconds. This will restore the default login (admin/admin) and erase all custom settings. Back up your configuration if possible before resetting.
User questions about WLA-500AP AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual WLA-500AP - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WLA-500AP by AIRLIVE.