ED2610 - Brush cutter Maruyama - Free user manual and instructions
Find the device manual for free ED2610 Maruyama in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Brush cutter |
| Brand | Maruyama |
| Model | ED2610 |
| Engine Displacement | 26 cc |
| Engine Type | 2-stroke, air-cooled |
| Power Output | 1.0 kW (1.34 hp) |
| Fuel Type | Unleaded gasoline mixed with 2-stroke oil (50:1 ratio) |
| Fuel Tank Capacity | 0.6 L |
| Cutting Width | 255 mm (10 in) |
| Cutting Attachment | Nylon line head or metal blade |
| Line Diameter | 2.0 mm (0.080 in) |
| Weight (without fuel) | 5.3 kg (11.7 lb) |
| Overall Dimensions (L x W x H) | 1800 x 250 x 300 mm |
| Shaft Type | Straight shaft |
| Handle Type | Bicycle handlebar with anti-vibration grips |
| Starter Type | Recoil start |
| Ignition | Electronic (CDI) |
| Noise Level (Lwa) | 115 dB(A) |
| Vibration Level (ahw) | 7.0 m/s² |
| Safety Features | Throttle lockout, shoulder strap, protective guard |
| Maintenance | Clean air filter regularly, sharpen blade, check spark plug |
| Warranty | 2 years limited |
Frequently Asked Questions - ED2610 Maruyama
What is the correct fuel mixture for the Maruyama ED2610?
The engine requires a 50:1 ratio of unleaded gasoline (87 octane or higher) to 2-stroke engine oil. Use a high-quality oil designed for air-cooled engines. Do not use ethanol blends above 10%.
How do I start the brush cutter?
1. Fill the fuel tank. 2. Set the choke lever to the closed position. 3. Press the primer bulb 5-6 times. 4. Pull the starter rope slowly until resistance, then pull sharply. 5. Once engine starts, open the choke gradually. 6. Let the engine warm up before use.
What cutting attachments can be used with the ED2610?
The ED2610 accepts both a nylon line head (for grass and weeds) and a metal blade (for thicker brush). Always use the correct guard for each attachment.
How often should I clean or replace the air filter?
Clean the air filter after every 10 hours of use. Replace it if damaged or excessively dirty. A clogged filter reduces engine power and increases fuel consumption.
Why does my trimmer stall when I press the throttle?
Common causes include a clogged fuel filter, dirty air filter, old fuel, or incorrect carburetor adjustment. First try fresh fuel and clean the air filter. If problem persists, check the spark plug and fuel lines.
What type of line should I use?
Use a 2.0 mm (0.080 in) diameter nylon line. Round line works well for general trimming, while serrated or star-shaped line is more aggressive for thick weeds.
How do I replace the spark plug?
Use a Champion CJ6Y or equivalent spark plug with a gap of 0.5 mm (0.020 in). Remove the spark plug cap, unscrew the old plug, and install the new one. Tighten to 20 N·m (15 ft-lb).
What safety precautions should I take?
Always wear eye protection, hearing protection, long pants, and sturdy boots. Use the shoulder strap. Keep bystanders at least 15 meters away. Never operate without the protective guard.
How do I store the brush cutter for winter?
Drain the fuel tank and run the engine dry. Clean the exterior. Remove the spark plug and add a drop of oil into the cylinder, then pull the starter slowly. Store in a dry, clean place.
Where can I find spare parts?
Genuine Maruyama parts are available from authorized dealers and online retailers. Common parts include air filters, spark plugs, fuel lines, and cutting heads. Use the model number ED2610 when ordering.
User questions about ED2610 Maruyama
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Brush cutter in PDF format for free! Find your manual ED2610 - Maruyama and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ED2610 by Maruyama.