Omada Pro S5500-24MPP4XF - Network switch TP-LINK - Free user manual and instructions
Find the device manual for free Omada Pro S5500-24MPP4XF TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Network Switch |
| Model | Omada Pro S5500-24MPP4XF |
| Brand | TP-Link |
| Form Factor | 19-inch Rackmount, 1U |
| Dimensions (W x D x H) | 440 x 270 x 44 mm |
| Weight | 5.6 kg |
| Power Supply | AC 100-240V, 50/60Hz, Built-in |
| Power Consumption | Max 450W (including PoE) |
| PoE Budget | 370W (all ports PoE+) |
| Ports | 24 x 10/100/1000 Base-T PoE+ (RJ45), 4 x 10G SFP+ |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | 802.1Q VLAN, up to 4K VLANs |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, RMON, Omada SDN |
| Security | 802.1X, ACL, MAC Filter, Storm Control |
| Cooling | 2 x Smart Fans, Front-to-Back Airflow |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Certifications | CE, FCC, RoHS |
| Cleaning | Use a dry, soft cloth. Do not use liquid cleaners. |
| Repairability | No user-serviceable parts. Contact TP-Link support for repairs. |
Frequently Asked Questions - Omada Pro S5500-24MPP4XF TP-LINK
How do I reset the TP-Link Omada Pro S5500-24MPP4XF to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until the system LED blinks rapidly. The switch will reboot with factory settings.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W (IEEE 802.3at). The total PoE budget is 370W.
Can I stack multiple S5500-24MPP4XF switches?
No, this model does not support physical stacking. However, you can manage multiple switches as a single unit using Omada SDN cloud management.
How do I access the web management interface?
Connect to any port, assign an IP address to your computer in the same subnet (default IP: 192.168.0.1), then open a browser and go to http://192.168.0.1. Default username/password: admin/admin.
Does the switch support VLAN tagging?
Yes, it supports 802.1Q VLAN with up to 4K VLANs, and also supports Q-in-Q for service provider networks.
What is the warranty period for this switch?
TP-Link provides a limited lifetime warranty for the Omada Pro series. Check TP-Link's website for details.
Can I use both RJ45 and SFP+ ports simultaneously?
Yes, all ports can be used simultaneously. The SFP+ ports support 10G and 1G fiber/copper modules.
How to update the firmware?
Go to System Tools > Firmware Upgrade in the web interface. Download the latest firmware from TP-Link's support site and upload it.
What type of cable should I use for PoE?
Use Cat5e or higher Ethernet cables for reliable PoE connectivity and full gigabit speeds.
Is the switch fanless?
No, it has two smart fans that adjust speed based on temperature for efficient cooling.
User questions about Omada Pro S5500-24MPP4XF TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual Omada Pro S5500-24MPP4XF - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Omada Pro S5500-24MPP4XF by TP-LINK.
USER MANUAL Omada Pro S5500-24MPP4XF TP-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TP-LINK
Model : Omada Pro S5500-24MPP4XF
Category : Network switch