M30 - Router IP-COM - Free user manual and instructions
Find the device manual for free M30 IP-COM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | IP-COM |
| Model | M30 |
| Dimensions (approx.) | 200 x 150 x 30 mm |
| Weight (approx.) | 300 g |
| Power Supply | 9V DC, 1A |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Max Speed | 300 Mbps |
| Ethernet Ports | 4 x LAN, 1 x WAN (10/100 Mbps) |
| Antennas | 2 external, fixed |
| Security | WPA2, WPA, WEP; SPI firewall |
| Management | Web-based interface |
| QPSS | Quality of Service (QoS) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, WAN, LAN, WLAN |
| Reset Button | Yes (factory reset) |
| Certifications | CE, FCC |
| Care and Cleaning | Wipe with dry cloth; keep away from moisture |
| Replacement Parts | Power adapter only; device is not user-serviceable |
Frequently Asked Questions - M30 IP-COM
How do I reset the IP-COM M30 to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds until the power LED flashes. Release the button; the router will reboot with default settings.
What is the default IP address to access the router settings?
The default IP address is 192.168.0.1. Enter this in your browser's address bar to access the web interface.
How do I change the Wi-Fi password?
Log into the router's web interface, go to Wireless Settings, and modify the Pre-Shared Key or passphrase. Save the changes.
Can I use the M30 as a range extender?
The M30 is a standard router, not a dedicated range extender. However, you can configure it as a wireless access point or bridge if supported in the firmware.
What should I do if I forgot my router login password?
Perform a factory reset by holding the Reset button for 10 seconds. Then use the default username 'admin' and password 'admin' (or blank) to log in.
Is the IP-COM M30 compatible with all internet service providers?
Yes, it works with most DSL, cable, or fiber providers as long as they provide an Ethernet connection. Check with your ISP for compatibility.
How many devices can connect to the M30 simultaneously?
The router supports up to 15-20 devices under normal home usage, depending on bandwidth and interference.
Does the M30 support IPv6?
Yes, the IP-COM M30 supports IPv6 protocol. You can enable it in the advanced network settings.
How do I update the firmware of the M30?
Download the latest firmware from the IP-COM website. Log into the router's web interface, go to System Tools > Firmware Upgrade, and upload the file.
What does the WPS button do?
The WPS button allows quick connection to Wi-Fi without entering a password. Press the WPS button on the router, then activate WPS on your device.
User questions about M30 IP-COM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual M30 - IP-COM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M30 by IP-COM.