SkyCenter SC-100S - Alarm system Redmond - Free user manual and instructions

Product Type	Wireless Alarm System
Model	SkyCenter SC-100S
Brand	Redmond
Dimensions (Main Unit)	120 x 80 x 25 mm
Weight (Main Unit)	150 g
Power Supply	DC 5V / 1A (USB adapter)
Battery Backup	3.7V Li-ion, 500 mAh
Standby Time	Up to 24 hours
Alarm Sound Level	100 dB
Motion Sensor Range	8 meters, 90° angle
Door/Window Sensor	Magnetic contact, 30 mm gap
Wireless Communication	433 MHz RF, 100 m range (open area)
Number of Zones	8 zones (expandable)
Remote Control	Included, up to 4 remotes
Smartphone Compatibility	Via optional GSM module
Operating Temperature	-10°C to 50°C
Mounting	Wall mount or tabletop
Certifications	CE, FCC
Warranty	1 year limited

Frequently Asked Questions - SkyCenter SC-100S Redmond

What is included in the box?

The box includes the main alarm unit, power adapter, remote control, door/window sensor, motion sensor, mounting screws, and user manual.

How do I pair new sensors with the system?

Enter pairing mode by pressing and holding the Learn button on the main unit for 3 seconds until the LED flashes. Then trigger the sensor (e.g., open the door contact). The unit will beep to confirm pairing.

Can I expand the system with additional sensors?

Yes, the system supports up to 8 zones. You can add extra door/window sensors, motion detectors, or other compatible 433 MHz devices.

What should I do if the alarm triggers falsely?

Check sensor placement: avoid motion sensors near heaters or windows with moving curtains. Reduce sensitivity if possible. Ensure door/window sensors are aligned properly.

How do I change the alarm siren sound?

The alarm siren is fixed at 100 dB. Some models allow toggling between continuous and pulsed modes via the remote (press and hold 'Sound' button for 2 seconds).

Can I use the system without a landline?

Yes, the system operates wirelessly via RF. For remote notifications, an optional GSM module can be added to send SMS alerts.

How long does the battery backup last?

The built-in rechargeable battery provides up to 24 hours of standby power during a power outage. Full charge takes about 4-6 hours.

Is the system weatherproof for outdoor use?

The main unit and sensors are intended for indoor use only. Keep them away from moisture and extreme temperatures.

How do I reset the alarm to factory settings?

Press and hold the Reset button (located under the cover) for 10 seconds using a paperclip. All paired sensors will be cleared.

What do the LED indicators mean?

Solid green: system armed. Flashing green: entry delay active. Solid red: alarm triggered. Flashing red: low battery or sensor fault.

USER MANUAL SkyCenter SC-100S Redmond

RUS

V. MENTUS, RESPECTIVE DIVISIONS, FAMILI, WWW.ATATT VERSIDIVI, EVIDITURENSWELL, 1985

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Coniūnui unmen / Coniūnui unmen / Conuenu unmin / Serial Article

	(in millions)
	2017	2016
Net earnings	3,458	3,394
Earnings per share:
(人民币元)	0.04	0.04
Weighted average of common stock	0.04	0.04

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a rule line on paper). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a placeholder fill-in-the-blank area. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.

(No text)

Signature

Hain (Mop) / Impress of the Company of the Seller

(No text)

1	2

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a ruled paper line). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a fill-in-the-blank placeholder. Therefore, the OCR result is inconsistent with the Ground Truth.

The appliance is of appropriate quality, in complete set and in full order. I have no claims, and have been

acquainted with the warranty service terms and conditions.

(Continuation of the following: 2013, 2014)

ENC

ENG

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Carefully read all instructions before operating the appliance and save them for future

reference. By carefully following these instructions you can considerably prolong the

service life of your appliance.

The safety measures and instructions contained in this manual do not cover all possible

situations that may arise during the operation of the appliance. When operating the

device the user should be guided by common sense, be cautious and attentive.

IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS

• The manufacturer is not responsible for injuries caused by failure to comply with

the safety requirements and operation rules of the appliance.

• This appliance is intended to be used for nonindustrial use in household and

similar spheres of application; staff kitchen areas in shops, offices and other work

environments, farm houses, by clients in hotels, motels and other residential.

environments. Industrial application or any other misuse will be regarded as

violation of proper service conditions. Should this happen, manufacturer is not

responsible for possible consequences.

- Do not operate the appliance outdoors if water or any foreign object gets into the

device housing it may result in serious damage of the appliance.

- Avoid direct sunlight on the device: it may cause interference.

DO NOT ignore the housing in water or wash it under running water

DO NOT imiserse the housing in water or wash it under running water: This appliance can be used by \$7/day seed from 2-week and above and prevent

• This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use

knowledge if they have been given supervision of instruction concerning the use of the appliance in a safe way and understand the boards involved. Children shall

of the appliance in a safe way and understand the hazards involved. Children shot not play with the appliance. Keep the appliance and its cord out of reach of children

not play with the appliance. Keep the appliance and its cold out of reach of child aged less than 8 years. Cleaning and user maintenance shall not be made by

aged less than 6 years. Cleaning and user maintenance shall not be made by children without supervision.

• No modifications or adjustments to the product are allowed. All the repair works

No modifications or adjustments to the product are obtained. For the repair terms should be carried out by an authorized service centre. Failure to do so may resu

should be earned out by an endangered service center. Future to do so may result in device and property damage or injury.

CATTION// Do not use the application in case of any malfunctions.

CADATION: DO NOT USE THE OPPIANCE IN CASE OF ANY MAJUNCTIONS.

Technical Specifications

Technical Specifications

Model...SkyCenter St-100S Electric Survey

Electric power 3 V

Body material plastic

Indication LED, audible

type of control......electronic, remote (Ready for Sky)

Data transmission standard......Bluetooth v4.0, WI-FI, 5G Supported operating systems...... iOS Android

Supported operating systems....103, Android

Infrared background yes Motion range up to 5 m

Motion sensor ....yes, operating range - up to 3 m Microrphone ....uns, operating range - up to 5 m

Microphone....yes, operating range - up to 3 m Speaker.

Speaker: yes Audio and video streaming: yes

Abulo and video streaming......yes Video format MP4

Video resolution 1280*720

Processor Quad-core MTK6587

Matrix 14"1 Mn CMOS sensor

Objective F 2.8

Viewing angle 110°

Memory card support....MicroSD, up to 32 Gb

Sim card slot YES

Working temperature range....from -10 to 50°C

at a relative humidity no more than 90%

Wall mount yes

Rotating base 360°

Overall dimensions....050 × 128 mm

Net weight 135 g

USB cable length 3 m

Package Includes

Package includes

Smart control center 1 pcs. Magnetic stand 1 pc

Magnetic Stando 1 pcs USB cable 1 pm

USB Cable 1 pcs.

Adapter 1 pcs.
User manual 1 pcs.

■ The manufacture means the right to make any modifications to design, packaging

The manufacturer reserves the right to make any modifications to design, packaging, as technical specifications of the product without prior notice. The specification is

or technical specifications of the product without prior notice. The specification allows an area of ± 10%

■ an error of -20%

Parts of the appliance △1

1. Control button 2. Magnetic stand

2. Control button 3. Magnetic stand 2. Remote lid (for any mounting)

3. Indicator 9. Removable lid (for easy mounting)

4. Camera 10. Memory card slot

5. Camera 10. Memory card slot

6. Infrared backlight 11. Fire card slot

7. Infrared backlight 11. Sim card slot

8. Speakers 12. Mise UER connectors

9. Speaker 12. Micro USB connector

10. Micrometer 13. USB cable

11. Motion sensor 13. USB cable 14. Adapter

12. Motion sensor 14. Adapter

[EMPTY]

Warranty service coupon N ²

(1) 2017年1月1日

|

The Ground Truth image displays a single, solid horizontal line, which is a stylistic or background element (like a rule line on paper). According to Rule 2, such lines must be ignored by the OCR result. The provided OCR content is "____", which consists of underscores. Underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line is incorrect because it misinterprets the line as a placeholder fill-in-the-blank area. Since the OCR output incorrectly rendered a stylistic line as underscores (which should be ignored), this violates the rule. Therefore, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

On the same time / first time / We apply yesterday / Pencil Description

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a fill-in-the-blank placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.