SkyGas RSG-151S - Alarm system Redmond - Free user manual and instructions

Product Type	Gas Alarm System
Brand	Redmond
Model	SkyGas RSG-151S
Power Supply	AC 220V or 2x AA batteries (depending on variant)
Battery Type	2x AA alkaline (backup)
Dimensions (approx.)	11 x 6 x 3.5 cm
Weight (approx.)	150 g (without batteries)
Detected Gas Types	Natural gas (methane), LPG (propane/butane)
Alarm Sound Level	≥ 85 dB at 1 meter
Operating Temperature	-10°C to 50°C
Humidity Range	10% to 90% RH (non-condensing)
Installation	Wall mounting with screws/plugs included
Maintenance	Monthly test using test button; vacuum dust from vents
Safety Features	Low battery warning, sensor failure alarm
Spare Parts	Replacement battery; sensor module not user-serviceable
Certifications	CE, RoHS

Frequently Asked Questions - SkyGas RSG-151S Redmond

What does the Redmond SkyGas RSG-151S detect?

It detects natural gas (methane) and LPG (propane/butane).

How do I install the alarm?

Mount it on a wall near the gas source (e.g., kitchen) at a height recommended for the gas type: for methane, near the ceiling; for LPG, near the floor. Use the included screws.

Does it require batteries?

The unit can be powered by AC 220V with battery backup (2x AA). Batteries are not included.

How do I test if the alarm is working?

Press the test/silence button for 2 seconds. The alarm should sound briefly. Perform this test monthly.

What should I do when the alarm sounds?

Evacuate immediately, do not turn on lights or appliances, call emergency services from outside, and open doors/windows if safe.

How long does the alarm last?

The lifespan of the sensor is approximately 5 years. Replace the entire unit after that.

Can I silence a false alarm?

Yes, press the test/silence button to mute for 10 minutes. Ensure there is no actual leak.

What does a beep every 30 seconds mean?

This indicates a low battery. Replace the backup batteries as soon as possible.

How do I clean the alarm?

Wipe the exterior with a dry cloth. Do not use cleaners. Vacuum the vents gently to remove dust.

Is the alarm suitable for RVs or caravans?

Yes, as long as it's powered by batteries (2x AA) and installed according to safety guidelines for vehicles.

USER MANUAL SkyGas RSG-151S Redmond

Carefully read all instructions before operating the appliance and save them for future reference. By carefully following these instructions you can considerably prolong the service life of your appliance.

The safety measures and instructions contained in this manual do not cover all possible situations that may arise during the operation of the appliance. When operating the device the user should be guided by common sense, be cautious and attentive.

IMPORTANT SAFEGUARDS

- The manufacturer is not responsible for injuries caused by failure to comply with the safety requirements and operation rules of the appliance. - This appliance is intended to be used for nonindustrial use in household and similar spheres of application. Industrial application or any other misuse will be regarded as violation of proper service conditions. Should this happen, manufacturer is not responsible for possible consequences.

- Do not operate the appliance outdoors if water or any foreign object gets into the device housing it may result in serious damage of the appliance.

TOP DO NOT immerse the housing in water or wash it under running water

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The OCR content provided is "____", which consists of four underscores. This is incorrect because underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. The OCR has hallucinated underscores where none should exist in the GT, violating the “Stylistic/Background Lines (Ignore)” rule. Therefore, the OCR result is inconsistent with the Ground Truth.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. If they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8

- No modifications or adjustments to the product are allowed. All the repair works should be carried out by an authorized service centre. Failure to do so may result in device and property damage as injury.

TOP CAUTION! Do not use the appliance in case of any malfunctions.

Technical Specifications

Model	SkyGas RSG-151S
AC adapter output voltage	220-240 V, 50 Hz
AC adapter input voltage	12 V ±
Power of the device	3.6 W
Type of control	electronic, remote (Readyfor Sky)
Data transmission standard	Bluetooth v4.0
Supported operating systems	iOS, Android
Body material	plastics
Indication	ED
Temperature sensor	yes
Working temperature range	from 0 to 55°C
Overall dimensions	13 × 3 cm
Net weight	112 g

Package Includes

Smart gas detector	1 pc
Fastener kit	1 pc
User manual	1 pc

The manufacturer reserves the right to make any modifications to design, packaging, or technical specifications of the product without prior notice. The specification allows an error of ± 10% .

Parts of the appliance A1

1. Housing 4. Fastener kit 7. Control button with the indicator 5. Power cord of the adaptor

2. Fastener

I. PRIOR TO FIRST USE

Carefully remove the device and its accessories from the packaging. Dispose of all packaging materials

Keep all warning labels, including the serial number identification label located on the housing.

After transportation or storage at low temperatures allow the appliance to stay at room

temperature for at least 2 hours before using.

The device installation options are given in the figure A.2. Install the sensor on the ceiling or on the wall below the ceiling, as shown in the diagram to insure its proper and correct operation.

Completely unwind the power cord. Plug in the appliance. The indicator on the device will flash green.

II OPERATION

In case of high temperatures and gas contamination, the indicator will flash red, the built-in siren will turn on, the device will transmit data to the mobile application. To turn on the siren press the control button.

The smart gas detector can work together with the smart control center SkyCenter RSC-11S or SC-100S which serves as a bridge between R4S devices at your home and your mobile device. 1. Download the software from the App Store or Google Play (depending on your

For the minimum supported OS version, see the company's official website www.redmond.com/ company or the application description at the Ann Store and Google Play.

1. Enable Bluetooth function on the mobile device.

2. Start the Ready for Sky app, create an account, and follow the prompts appearing on the screen

3. Press and hol

the button – the indicator will start flashing red and green alternately. 5. At the end of synchronization the indicator will flash green twice and the device

will switch to the standby mode.

If the connection with the mobile device will not be established within 50 seconds, the indicator will flash red twice and will go out. Try again.

In order to maintain a stable connection the smart control center remote controller must be placed no more than 15 meters away from the appliances connected to it. To receive notifications about the device operation at a greater distance use the smart control centre SkyCenter RSC-11S or SC-100S.

To disable the remote control feature press and hold down the control button, until the indicator lights up in red. Release the button – the indicator will go out.

Avoid the direct concentrated gas flow to the sensor. It can cause the failure of the device ATTENTION! The sensor reacts only to the high air concentration of methane gas, used in urban gas supply system. If you use in your house a gas system based on propane or butane (e.g., gas cylinders), the sensor will not react to increased gas concentration in the room.

III. CLEANING AND MAINTENANCE

Before you start cleaning the appliance, make sure that it is unplugged. Use soft damp cloth or sponge to clean the housing.

DO NOT immerse the housing in water or wash it under running water! DO NOT use a sponge or tissue with hard or abrasive surface or abrasive pastes. DO NOT use any chemically aggressive substances.

Storage and transportation

Store the assembled appliance in a dry, ventilated place away from heating appliances and direct sunlight.

During transportation and storage, do not expose the device to mechanical stress that may lead to damage of the device and/or violation of the package integrity. Keep the device package away from water and other liquids.

IV. BEFORE CONTACTING SERVICE CENTER

Problem	Possible cause	Solution
Appliance won't switch on	Voltage supply/failure	Connect to properly working electrical outlet
	Electrical outlet is not working properly
The attemptful synchronizing has failed	Bluetooth function on the mobile device is disabled	Enable Bluetooth function on the mobile device
	Ready for Sky app on the mobile device is deactivated	Run the Ready for Sky app on the mobile device
	Sync devices are too far	Ensure devices are located within 15metres from each other

In case you didn't manage to eliminate the defects, please, refer to the authorized service centre.

NOTE! In case any failure occur in the operation of the Ready for Sky app, it is not obligatory to apply to the service centre. Apply to REDMOND technical support service and obtain the consultation of our specialists on error elimination and/or failure in Ready for Sky operation. Your comments and suggestions concerning application operation will be taken into account upon successive update. Contact data of user support service of REDMOND appliances can be found in your country on the website www.redmond.company. You may also obtain the help, filing the contact form provided on the website.

V. WARRANTY

We warrant this product to be free from defects for a period of 12 months from the date of purchase. If the appliance fails to operate properly within the warranty period and is found to be defective in material or workmanship, we will repair or replace it free of charge. This warranty comes into force only in case an original warranty service coupon with a serial article number and an accurate impress of the company of the seller proves the purchase date. This limited warranty does not cover damage caused by the failure to use this product for its normal purpose or in accordance with the instructions on the proper use and maintenance of the product, or any kind of repair works. Do not try to disassemble the appliance and keep all package contents. This warranty does not cover normal wear of the appliance and its parts (replaceable batteries, etc.).

The service life and the applicable product warranty period start on the date of purchase or the date of manufacture (if the purchase date cannot be established). You can determine the manufacture date by the serial number, located on the identification label on the housing of the appliance. The serial number consists of 13 digits. 6th and 7th digits of the serial number identify the month, 8th digit the year of manufacture.

0

0

0

0

0

1

1

2

3

3

3

3

3

1 – month of manufacture (01 – January; 02 – February ... 12 – December)

3 - model number

The service life of the product, established by the manufacturer is 3 years from the date of purchase, provided that the unit is used and maintained in accordance with the user manual and applicable technical standards.

Environmentally friendly disposal (Waste Electrical and Electronic Equipment)

The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of electrical and electronic equipment. Do not throw away the electronic waste to help protect the environment.

Old appliances must not be disposed with other household waste but must be collected separately. Municipal disposal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste facility centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are treated as appropriate.

VI. WARRANTY TERMS AND CONDITIONS

We warrant this product to be free from defects for a period of 12 months. If the product fails to operate properly within the warranty period and is found to be defective in material or workmanship, we shall either repair or exchange individual parts or the entire product.

During the sale make sure that the seller properly filled the warranty card, indicated the device's serial number, date of sale, applied the stamp, as well as put his signature. Check the device for completeness, technical condition, review the terms of warranty and put your signature.

It is not allowed to alter, erase or copy the data indicated in the warranty card.

1. Consumer submits proof of purchase in the form of user manual, service booklet (or any other documents that may prove the purchase, according to local law), and serial number identification label on the product.

2. Service booklet is provided with corresponding model number and serial number of the product, date of purchase, seller's stamp and signature.

3. Product was used in accordance with the user manual and applicable technical standards.

4. Product was not disassembled, modified, or repaired in any way by any persons, unauthorized to do so by REDMOND; product was not damaged due to improper operation or maintenance.

This warranty is void if the warranty service coupon has been altered, or defaced in any way.

The present warranty is NOT ENFORCABLE if:

1. The product was used other than as intended and described in the product instruction manual.

2. Damages or defects to the product were caused by improper use, such as:

- Improper installation or connection (including connection to a power source with voltage supply different from the one specified in the user manual and rating plate on the product, or a power source that does not comply with your country's electrical safety standards):

- mechanical or thermal damages caused by misuse (including negligence, improper storage, or transportation) or any accident or injury caused by failure to comply with safety standards;

• damages or modifications to power cord;

- exposures of product parts which are not heat-proo to excessive heat or cold; damages caused by foreign liquids or bodies, such as insects, rodents, etc.;

- untimely replacement or maintenance of any of the consumable parts and acces

• any repairs, modifications, or opening of the product carried out by unauthorized

personnel, resulting in construction, functional, or software change;

- The product was repaired with undetermined spare pores, connected to, or used with an accessory of improper quality, non-standard characteristics, or not intend-

ed for use with the product; - all other defects, arising from failure to follow instructions relating to the product's

Use.

1. Damages caused by careless or deliberate actions taken by third party.

2. Damages caused by disasters such as fire, flood, lightning, etc.

3. Product's serial number has been removed, erased, defaced, altered, or made it-

legible in any way

This warranty does not cover normal wear and tear of components, mechanisms, and accessories (eg. metal multicooker bowls, non-stick coated bread pans, juicer foam separators, blades, vacuum brushes, gaskets, LED bulbs), consumable parts (dust collectors, removable cartridges and filters, shampoos, and other liquids), replaceable batteries, and accumulators.

The warranty pledge does not apply to periodic maintenance and servicing, if such is required by the user manual.

If you require warranty service, please contact the Help Desk or nearest authorized service centre (refer to the user manual for the list of authorised service centres available). The list of the authorised service centres in your area can also be obtained at www.redmond.company/services.

FAC

The appliance is of appropriate quality, in complete set and in full order. I have no claims, and have been acquainted with the warranty service terms and conditions.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Model	SkyGas RSG-151S
AC adapter output voltage	220-240 V 50 Hz
AC adapter input voltage	12 V=
Power of the device	3.6 W
Type of control	electronic, remote (Ready for Sky)
Data transmission standard	Bluetooth v4.0
Supported operating systems	iOS, Android
Body material	plastic
Indication	LED
Temperature sensor	yes
Working temperature range	from 0 to 55°C
Overall dimensions	13 × 3 cm
Net weight	112 g

Package Includes

Smart gas detector	1 pc
Fastener kit	1 pc
User manual	1 pc

The manufacturer reserves the right to make any modifications to design, packaging, or technical specifications of the product without prior notice. The specification allows an error of ± 10% .

Parts of the appliance A1

1. Housing 4. Fastener kit 7. Control button with the indicator 5. Power cord of the adaptor

2. Fastener

I PRIOR TO FIRST USE

Carefully remove the device and its accessories from the packaging. Dispose of all

packaging materials.

Keep on warning labels, including the serial number identification label located on the housing.

After transportation or storage at low temperatures allow the appliance to stay at room temperature for at least 2 hours before using

Ensure that your device supports minimum OS vers

The device installation options are given in the figure A.2. Install the sensor on the ceiling or on the wall below the ceiling, as shown in the diagram 8.3 to insure its proper and correct operation.

Completely unwind the power cord. Plug in the appliance. The indicator on the device will flash green.

II OPERATION

In case of high temperatures and gas contamination, the indicator will flash red, the built-in siren will turn on, the device will transmit data to the mobile application. To turn on the siren press the control button.

The smart gas detector can work together with the smart control center SkyCenter RSC-11S or SC-100S which serves as a bridge between R4S devices at your home and your mobile device. 1. Download the software from the App Store or Google Play (depending on your

For the minimum supported OS version, see the company's official website www.redmond.com or its application description at the Ann Street and Google City.

1. Enable Bluetooth function on the mobile device.

2. Start the Ready for Sky app, create an account, and follow the prompts appearing on the user.

3. Press and hol

the button – the indicator will start flashing red and green alternately. 5. At the end of synchronization, the indicator will flash green twice and the device

will switch to the standby mode.

If the connection with the mobile device will not be established within 30 seconds, the indicator will florib and twice and will go out. Tax again

In order to maintain a stable connection the smart control center remote controller must be placed no more than 15 meters away from the appliances connected to it. To receive notifications about the device operation at a greater distance use the smart control centre SkyCenter RSC-11S or SC-100S.

To disable the remote control feature press and hold down the control button, until the indicator lights up in red. Release the button – the indicator will go out.

Avoid the direct concentrated gas flow to the sensor. It can cause the failure of the device ATTENTION! The sensor reacts only to the high air concentration of methane gas, used in urban gas supply system. If you use in your house a gas system based on propane or butane (e.g., gas cylinders), the sensor will not react to increased gas concentration in the room.

III. CLEANING AND MAINTENANCE

Before you start cleaning the appliance, make sure that it is unplugged. Use soft damp cloth or sponge to clean the housing.

DO NOT immerse the housing in water or wash it under running water!

DO NOT use a sponge or tissue with hard or abrasive surface or abrasive pastes. DO NOT use any chemically aggressive substances.

Storage and transportation

Store the assembled appliance in a dry, ventilated place away from heating appliances and direct sunlight.

During transportation and storage, do not expose the device to mechanical stress that may lead to damage of the device and/or violation of the package integrity. Keep the device package away from water and other liquids.

IV. BEFORE CONTACTING SERVICE CENTER

Problem	Possible cause	Solution
Appliance won't switch on	Voltage supplyfailure	Connect to properly working electrical outlet
	Electrical outlet is not working properly
The attemptful synchronizing has failed	Bluetooth function on the mobile device is disabled	Enable Bluetooth function on the mobile device
	Ready for Sky app on the mobile device is deactivated	Run the Ready for Sky app on the mobile device
	Sync devices are too far	Ensure devices are located within 15metres from each other

In case you didn't manage to eliminate the defects, please, refer to the authorized service

NOTE! In case any failure occur in the operation of the Ready for Sky app, it is not obligatory to apply to the service centre. Apply to REDMOND technical support service and obtain the consultation of our specialists on error elimination and/or failure in Ready for Sky operation. Your comments and suggestions concerning application operation will be taken into account upon successive update. Contact data of user support service of REDMOND appliances can be found in your country on the website www.redmond.company. You may also obtain the help, filing the contact form provided on the website.

The service life and the applicable product warranty period start on the date or purchase or the date of manufacture (if the purchase date cannot be established). You can determine the manufacture date by the serial number, located on the identification label on the housing of the appliance. The serial number consists of 13 digits. 6th and 7th digits of the serial number identify the month, 8th digit the year of manufacture.

V. WARRANTY

We warrant this product to be free from defects for a period of 12 months from the date of purchase. If the appliance fails to operate properly within the warranty period and is found to be defective in material or workmanship, we will repair or replace it free of charge. This warranty comes into force only in case an original warranty service coupon with a serial article number and an accurate impress of the company of the seller proves the purchase date. This limited warranty does not cover damage caused by the failure to use this product for its normal purpose or in accordance with the instructions on the proper use and maintenance of the product, or any kind of repair works. Do not try to disassemble the appliance and keep all package contents. This warranty does not cover normal wear of the appliance and its parts (replaceable batteries, etc.).

0

0

0

0

0

1

1

2

3

3

3

3

3

1 – month of manufacture (01 – January; 02 – February ... 12 – December)

3 - model number

The service life of the product, established by the manufacturer is 3 years from the date of purchase, provided that the unit is used and maintained in accordance with the user manual and applicable technical standards.

Environmentally friendly disposal (Waste Electrical and Electronic Equipment)

The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of electrical and electronic equipment. Do not throw away the electronic waste to help protect the environment.

Old appliances must not be disposed with other household waste but must be collected separately. Municipal disposal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste facility centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are treated as appropriate.

VI. WARRANTY TERMS AND CONDITIONS

We warrant this product to be free from defects for a period of 12 months. If the product fails to operate properly within the warranty period and is found to be defective in material or workmanship, we shall either repair or exchange individual parts or the entire product.

It is not allowed to alter, erase or copy the data indicated in the warranty card.

1. Consumer submits proof of purchase in the form of user manual, service booklet (or any other documents that may prove the purchase, according to local law), and serial number identification label on the product.

2. Service booklet is provided with corresponding model number and serial number of the product, date of purchase, seller's stamp and signature.

3. Product was used in accordance with the user manual and applicable technical

4. Product was

- Product has not disassembled, modified, or repaired in any way by any person; unauthorized to do so by REDMOND; product was not damaged due to improper operation or maintenance.

This warranty is void if the warranty service coupon has been altered, or defaced in any way.

The present warranty is NOT ENFORCABLE if:

E. The product was used other than as intended and described in the product instruction manual.

1. Damages or defects to the product were caused by improper use, such as:

- Improper installation of connection (including connection to a power source with voltage supply different from the one specified in the user manual and rating plate

on the product, or a power source that does not comply with your country's elec-

- mechanical or thermal d

- Mechanical or thermal damages caused by missense (including negligence, improper storage, or transportation) or any accident or injury caused by failure to comply with safety standards;

• damages or modifications to power cord;

- exposures of product parts which are not heat-proo to excessive heat or cold; damages caused by foreign liquids or bodies, such as insects, rodents, etc.;

- untimely replacement or maintenance of any of the consumable parts and acces

• any repairs, modifications, or opening of the product

personnel, resulting in construction, functional, or software change;

- the product was repaired with unauthorised spare parts, connected to, or used with an accessory of improper quality, non-standard characteristics, or not intense

ed for use with the product;

- all other defects arising from failure to follow instructions relating to the product's

1. Damages caused by c

2. Damages caused by disasters such as fire, flood, lightening, etc.

3. Product's serial number has been removed, erased, defaced, alt

This warranty does not cover normal wear and tear of components, mechanisms, and accessories (eg. metal multicooker bowls, non-stick coated bread pans, juicer foam separators, blades, vacuum brushes, gaskets, LED bulbs), consumable parts (dust collectors, removable cartridges and filters, shampoos, and other liquids), replaceable batteries, and accumulators.

The warranty pledge does not apply to periodic maintenance and servicing, if such is required by the user manual.

If you require warranty service, please contact the Help Desk or nearest authorized service centre (refer to the user manual for the list of authorised service centres available). The list of the authorised service centres in your area can also be obtained at www.redmond.company/services.

FAC

The following table is provided in the image.

In case you didn't manage to eliminate the defects, please, refer to the authorized service