36-8550 - Lamp Cotech - Free user manual and instructions

Product Type	LED Lamp with RGB
Brand	Cotech
Model	36-8550
Power Supply	Mains adapter 230V AC, 50Hz
Adapter Output	12V DC, 0.75A
Light Source	Integrated LED (non-replaceable)
Color Capability	RGB multi-color
Remote Control Range	Up to 5 meters
Remote Control Battery	1 × CR2025 (included)
Protection Class	Class II
Usage Location	Indoor only
Assembly	Screw LED light fitting onto base finger-tight
Care and Cleaning	Unplug before cleaning; use dry cloth or vacuum cleaner
Safety Warnings	Do not modify; use only included adapter; avoid flammable liquids/gases
Disposal	Do not dispose with household waste; recycle at appropriate facility
LED Lifetime	Non-replaceable; replace entire product when LEDs fail
Dimensions	Not specified in manual
Weight	Not specified in manual

Frequently Asked Questions - 36-8550 Cotech

How do I set up the lamp?

Screw the LED light fitting onto the base finger-tight. Connect the LED light fitting to the mains adapter lead, then plug the adapter into a suitable electrical outlet. Finally, pull out the plastic film from the remote control's battery compartment.

Can I use the lamp outdoors?

No, the lamp is intended for indoor use only. Do not expose it to moisture or outdoor conditions.

How do I change the color?

Use the included remote control to cycle through RGB colors. The remote has buttons for different colors and effects.

What battery does the remote control use?

The remote uses a CR2025 lithium coin battery, which is included in the package.

What is the range of the remote control?

The remote control has a maximum range of 5 meters.

Can I replace the LED lights?

No, the LED light sources cannot be replaced. When the LEDs reach the end of their service life, the entire product must be discarded.

How should I clean the lamp?

Always unplug the mains adapter from the wall socket before cleaning. Use a dry cloth or vacuum cleaner to remove dust.

What power adapter is needed?

The lamp must be connected to the included mains adapter. It accepts 230V AC, 50Hz input and outputs 12V DC, 0.75A.

Is the lamp dimmable?

The manual does not mention dimming functionality. The lamp is primarily designed for color changing, not brightness control.

What should I do if the lamp stops working?

First, check that the mains adapter is properly plugged in and the outlet has power. Ensure the remote control battery is installed correctly and has charge. If problems persist, consult the manual or contact customer support.

USER MANUAL 36-8550 Cotech

Read the entire instruction manual before use and save it for future reference. We apologize for any text and picture errors and any changes of technical data.

Safety

Warning

• Neither the product nor its mains adaptor may be disordered or modified in any way.
• Never use the product or the mains adapter if it is in any way damaged or malfunctioning. Unplug the product immediately if it is damaged.
• Do not use the product in explosive atmospheres or in the presence of flammable liquids or gases.
• The product must only be connected to the included mains adapter.
• Never connect multiple or other types of devices to the mains adapter
• The product must not be installed on a wet or electrically conductive surface.
• Make sure that the cables are not damaged whilst the product is being installed.
• Always unplug the mains adapter from the wall socket when the product is not in use.
• Do not carry the product using the mains lead and do not use it for other unsuitable purposes.
• Never let children play with the product.
• The product may be used by persons with reduced physical, sensory or mental capabilities or persons with a lack of experience or knowledge which could jeopardise their safety, provided they have been instructed in the safe operation of the product and understand the hazards involved.

△ Important

• The LED light sources cannot be replaced. When the LEDs have reached the end of their service life, the entire product must be discarded.
  • This product is intended only for private use.

Potentially hazardous optical radiation.

Δ40 or look directly at the light source.

product is not suitable for

trailing a room.

product is intended for indoor use only.

ss II mains adapter.

lass II string light

Bordsbelysning RGB

Art. or 36-8550

Assembly

1. Screw the LED light filling onto the base (only finger-light).
2. Connect the LED light filling to the melns adapter lead.
3. Fug the mains adapter into a suitable electrical outlet.
4. Pull out the plastic film tax protruding from the battery compartment of the remote control.

Montering

Care and maintenance

- Under the main load from the wall socket before cleaning.

- The product should be cleaned using a dry cloth or vacuum cleaner.

Responsible disposal

The symbol indicates that the product should not be disposed of with general household waste. This applies throughout the entire DU. In order to prevent possible damage from human health and the environment caused by improper waste disposal, at the end of its service life the product should be taken to an appropriate recycling facility so that the material can be disposed of in a responsible manner. Take the used product to your local waste management facility or the place of purchase they will ensure that the product is disposed of in an environmentally sound manner.

Specifications

Mains adapter

Power supply 230 V AC, 50 Hz

Output |2V, 0.75 ADC

Strip light

0.130 cm × H 800 cm

Light source

13 VDC

Rated power

(1)

Remote control

Max 5 m

Battery

1 × CR2025 included

PRINT A3 DOUBLE SIDED AND FOLD AFTER MARKINGS LIKE PICTURE