PTC-200 - Camcorder DataVideo - Free user manual and instructions
Find the device manual for free PTC-200 DataVideo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PTZ Camera (Pan-Tilt-Zoom) |
| Brand | DataVideo |
| Model | PTC-200 |
| Image Sensor | 1/2.8-inch CMOS |
| Resolution | Full HD 1080p (1920x1080) |
| Optical Zoom | 20x |
| Pan Range | ±170° |
| Tilt Range | +90° / -30° |
| Video Output | 3G-SDI, HDMI, IP (H.264/H.265) |
| Control Protocol | VISCA over RS-232/422, IP |
| Dimensions (WxHxD) | 200 x 200 x 300 mm (approx.) |
| Weight | 2.5 kg (approx.) |
| Power Supply | PoE+ (IEEE 802.3at) or DC 12V |
| Power Consumption | 24W (max) |
| Operating Temperature | 0°C to 40°C |
| Main Functions | Pan, Tilt, Zoom, Preset positions, Auto tracking, Web UI control |
| Maintenance & Cleaning | Clean the lens with a soft, dry cloth. Do not use alcohol or solvents. |
| Safety | Do not expose to rain or moisture. Use only recommended power sources. |
| Spare Parts & Reparability | Contact authorized service center. No user-serviceable parts inside. |
| General Information | Professional PTZ camera designed for broadcast, education, and live events. |
Frequently Asked Questions - PTC-200 DataVideo
How do I connect the PTC-200 to a network?
Connect an Ethernet cable to the PoE+ port. Ensure your network switch supports PoE+. The camera will obtain an IP address via DHCP. Use the Web UI or VISCA over IP for control.
What video formats does the PTC-200 support?
It supports 1080p at 60/50/30/25 fps via 3G-SDI, HDMI, and IP streaming. IP output can be H.264 or H.265 with adjustable bitrate.
Can I control the camera remotely?
Yes, you can control it via VISCA commands over RS-232/422 or IP. A web interface is also available for configuration and basic control.
How do I set presets on the PTC-200?
Via the Web UI or external controller: move the camera to the desired position, then call the preset save command (e.g. VISCA command 81 01 04 3F 01 00). Up to 255 presets can be stored.
What is the maximum pan and tilt speed?
Pan speed: up to 300°/s; Tilt speed: up to 125°/s. The speeds can be adjusted via the control protocol.
Does the PTC-200 support auto tracking?
Yes, it has a built-in auto-tracking function that can track a moving person or object. It can be enabled via the Web UI or a dedicated command.
What should I do if the camera stops responding?
First, power cycle the camera (disconnect PoE or DC power for 10 seconds). If the issue persists, check the network connection and try a factory reset via the Web UI or physical reset button.
Can I mount the PTC-200 on a ceiling or wall?
Yes, it supports both ceiling and wall mounting using the included mounting bracket. Ensure the mount is securely fastened to a solid surface.
How do I update the firmware?
Download the latest firmware from DataVideo's website. Access the Web UI, go to System > Firmware Update, and upload the .bin file. Do not power off during update.
Is the PTC-200 compatible with third-party controllers?
Yes, it uses the standard VISCA protocol, which is widely supported by controllers from DataVideo, PTZOptics, and others via RS-232/422 or IP.
User questions about PTC-200 DataVideo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camcorder in PDF format for free! Find your manual PTC-200 - DataVideo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PTC-200 by DataVideo.