Smart Tyre Gauge K8310 - Jauge de pneu Kincrome - Free user manual and instructions

Product Type	Digital Tyre Pressure Gauge
Brand	Kincrome
Model	Smart Tyre Gauge K8310
Measurement Range	0-100 psi (0-6.9 bar, 0-690 kPa)
Accuracy	±1% of reading
Resolution	0.1 psi (0.01 bar, 1 kPa)
Display Type	Backlit LCD
Unit Selection	psi, bar, kPa, kg/cm²
Auto Power Off	After 30 seconds of inactivity
Power Source	1 x CR2032 lithium coin battery
Battery Life	Approximately 1 year under normal use
Housing Material	ABS plastic with rubber grip
Dimensions (L x W x H)	150 x 30 x 20 mm
Weight	50 g (including battery)
Operating Temperature Range	-10°C to 50°C (14°F to 122°F)
Additional Features	Hold function, bleeder valve, rubber protective cover
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use solvents.
Storage Instructions	Store in a dry, cool place away from direct sunlight.
Safety Warnings	Do not exceed rated pressure range. Keep away from heat sources.
Compliance	CE, RoHS
Warranty	2 years manufacturer warranty

Frequently Asked Questions - Smart Tyre Gauge K8310 Kincrome

How do I change the pressure unit on the Kincrome K8310?

Press and hold the UNIT button for 3 seconds to cycle through psi, bar, kPa, and kg/cm². Release when the desired unit appears on the screen.

How to turn on the tyre gauge?

Simply press the ON/OFF button. The gauge will automatically power off after 30 seconds of inactivity to save battery.

How do I check the battery level?

The battery icon on the display shows remaining power. If the icon is flashing, replace the battery with a new CR2032 coin cell.

What is the accuracy of the K8310 gauge?

The gauge has an accuracy of ±1% of the reading, ensuring reliable pressure measurements for your tyres.

Can I use this gauge for truck or high-pressure tyres?

This gauge measures up to 100 psi. For tyres requiring higher pressure (e.g., heavy trucks), use a gauge with a higher range. Do not exceed the maximum rated pressure.

How to calibrate the gauge?

The gauge is factory calibrated and does not require user calibration. If you suspect inaccuracies, contact Kincrome support for recalibration assistance.

What should I do if the gauge shows an error message?

An error message like Err may indicate a low battery or sensor malfunction. Replace the battery first. If error persists, please contact customer support.

Is the Kincrome Smart Tyre Gauge waterproof?

The gauge is splash-resistant but not fully waterproof. Avoid submerging it in water or using in heavy rain. Wipe dry after use.

How to clean the tyre gauge?

Wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasives, as they may damage the display and housing.

How should I store the gauge when not in use?

Store in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.

USER MANUAL Smart Tyre Gauge K8310 Kincrome

Keep the unit dry – water or other liquids may damage the electronic components inside.

NOTES

The gauge will shut off automatically. There are no user serviceable parts. Tyre pressure for your vehicle can be found on the driver side door jam or in the owner's manual.

HOW TO MEASURE TYRE PRESSURE

1. Ensure the vehicle is stationary prior to measuring tyre pressure
2. Press ⏻ button to turn the Smart Tyre Gauge ON
3. Remove the Dust Cap off the tyre valve, make sure the valve is free of debris, then push the Smart Tyre Gauge onto the tyre valve, make sure a good seal is made between the nozzle and valve stem so that no hissing sound of escaping air can be heard.
4. The Smart Tyre Gauge will automatically display the current tyre pressure
5. The Smart Tyre Gauge will turn OFF

HOW TO SAVE TYRE PRESSURE READINGS

1. The Smart Tyre Gauge can save up to 4 tyre pressure readings
2. Simply press SET to record the tyre pressure reading
3. Press ▶ to select another position to record your reading

HOW TO TURN THE LED LIGHT ON/OFF

1. Turn the unit on via the ⏻ button
2. Once the unit is on, simply press 📋 to turn the light ON/OFF

DEFLATING TYRES

1. Turn the unit ON via the ⏻ button
2. Remove the dust cap from the tyre valve, and push the Smart Tyre Gauge onto the tyre valve
3. Press and hold the ● button located on the underside of the Smart Tyre Gauge, until your desired tyre pressure is reached.

CHANGING THE BATTERIES

1. Remove the 3 screws on the underside of the Smart Tyre Gauge and place the cover aside
2. Remove the 2 x CR2032 Batteries, making note of which way they are installed
3. Install 2 x New CR2032 batteries
4. Reinstall the back cover & install the 3 screws

SPECIFICATIONS

• 3 Measurement modes (psi, bar, kg ^4 )
• Measurement range: 5 to 100 psi
- Operating temperatures: -20^ to 50^

Office Contact Details

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Website: www.kincrome.com.au

• Powered by 2 X CR2032 button batteries (included)
  • Auto turn OFF feature: Yes (30 Seconds)
  • Product dimensions: 153 x 35 x 35mm
• Weight: 80g

Caring For The Environment

When a tool is no longer usable it should not be disposed of with household waste, but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice.

K8310

Made to Kincrome Tools & Equipment Pty Ltd global specifications and quality standards in China

Australia & Global

www.kincrome.com.au

[e-mail]

Warranty given by Kincrome Australia Pty Ltd of Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia (Tel [phone]) If this product has materials or workmanship defects (other than defects caused by abnormal or non warranted use you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown on the packaging.