eServer xSeries 460 - Server IBM - Free user manual and instructions
Find the device manual for free eServer xSeries 460 IBM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | IBM |
| Model | eServer xSeries 460 |
| Form Factor | Rack-mountable (4U) |
| Dimensions (H x W x D) | 7.0 x 17.5 x 28.5 in (17.8 x 44.5 x 72.4 cm) |
| Weight | Approximately 55 lb (25 kg) |
| Processor | Up to 4 Intel Xeon MP processors |
| Memory | Up to 64 GB DDR SDRAM (16 DIMM slots) |
| Storage | Hot-swap SCSI or SAS hard drives |
| Power Supply | Dual redundant power supplies (1300W each) |
| Cooling | Hot-swap redundant fans |
| Network | Dual Gigabit Ethernet ports |
| Management | IBM Director and RSA II adapter |
| PCI Expansion Slots | 6 PCI-X slots |
| Operating Systems Supported | Windows Server, Linux, VMware ESX |
| Maintenance & Cleaning | Power off and unplug before cleaning; use compressed air for dust removal |
| Safety | Complies with UL, CSA, FCC Class A; ensure proper grounding |
| Spare Parts & Repairability | Hot-swap drives, power supplies, fans, and memory. Contact IBM for FRU replacements. |
| General Information | Enterprise server designed for high-availability applications; supports clustering and virtualization. |
Frequently Asked Questions - eServer xSeries 460 IBM
How do I install the server in a rack?
Use the included rack mount kit. Attach rails to the rack posts, then slide the server onto them and secure with screws. Ensure the rack is stable and grounded.
What are the supported operating systems?
The server supports Windows Server 2003/2008, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESX.
How can I upgrade memory?
Power down the server, open the top cover, and locate the 16 DIMM slots. Insert registered DDR SDRAM modules of matching speed. Refer to the manual for memory population rules.
How do I replace a failed hard drive?
The drives are hot-swappable. Simply press the release button on the drive carrier, pull out the faulty drive, and insert a new one. The RAID controller will rebuild automatically if configured.
What is the maximum processor configuration?
The server supports up to four Intel Xeon MP processors installed in CPU sockets 0 through 3. All processors must be of the same type and stepping.
How to reset the administrative password?
Locate the clear CMOS jumper on the system board. Power off, move the jumper to the clear position for a few seconds, then restore. This resets the BIOS password.
Can I use the server with a UPS?
Yes, the server has dual redundant power supplies and is compatible with most UPS systems. Connect each power supply to a separate UPS for redundancy.
How to diagnose hardware failures?
Use the IBM Director management software or the front panel LED indicators. The server also supports Light Path Diagnostics to identify faulty components.
What type of cooling does the server require?
The server uses hot-swap redundant fans for cooling. Ensure proper airflow in the rack by maintaining at least 1U spacing above and below.
Where can I find the latest drivers and firmware?
Visit the IBM Support website and search for xSeries 460. Drivers, firmware updates, and documentation are available for download.
User questions about eServer xSeries 460 IBM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual eServer xSeries 460 - IBM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. eServer xSeries 460 by IBM.