eServer System x3630 M3 - Server IBM - Free user manual and instructions
Find the device manual for free eServer System x3630 M3 IBM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mount server, 2U form factor |
| Dimensions (H x W x D) | 3.44 in x 17.5 in x 25.5 in (87 mm x 445 mm x 648 mm) |
| Weight | Approximately 27 kg (59.5 lbs) fully configured |
| Power Supply | Dual redundant hot-swap 750W or 1200W AC power supplies |
| Processor Support | Intel Xeon E5600 series (up to 2 processors) |
| Memory Support | Up to 144 GB DDR3 ECC RDIMM (16 slots) |
| Storage | Up to 12 x 3.5" or 16 x 2.5" SAS/SATA hot-swap drives |
| RAID Support | IBM ServeRAID M5014 or M5015 (hardware RAID 0,1,5,10) |
| Network Interfaces | Dual Gigabit Ethernet (on-board) |
| Expansion Slots | 5 PCIe x8 slots (gen 2) |
| Remote Management | Integrated Management Module (IMM) with dedicated network port |
| Cooling | 6 hot-swap fans with redundancy |
| Maintenance Features | Hot-swap drives, fans, and power supplies; tool-less access |
| Security Features | Lockable front bezel, TPM 1.2 support, secure firmware updates |
| Spare Parts Availability | IBM Service parts - order via IBM parts center or authorized resellers |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Operating Humidity | 8% to 80% (non-condensing) |
| Regulatory Compliance | FCC, CE, UL, RoHS |
| Warranty | 3-year limited warranty (standard), extended options available |
Frequently Asked Questions - eServer System x3630 M3 IBM
What is the maximum memory capacity of the IBM eServer System x3630 M3?
The system supports up to 144 GB using 16 DDR3 RDIMM slots (4 GB per slot with 16 GB modules, but typically 8 GB modules for 128 GB).
How many hard drives can the x3630 M3 accommodate?
It can hold up to 12 x 3.5-inch or 16 x 2.5-inch hot-swap SAS or SATA drives, depending on the backplane configuration.
What type of processors does this server use?
It uses Intel Xeon E5600 series processors (e.g., E5606, E5620, E5640, E5645, E5649) with LGA1366 socket, up to 2 CPUs.
Does it support hot-swap power supplies?
Yes, the server comes with redundant hot-swap power supplies (750W or 1200W) for high availability.
How do I access the remote management interface?
The server includes an Integrated Management Module (IMM) with a dedicated Ethernet port. Default IP is 192.168.70.125, user ID: USERID, password: PASSW0RD (change immediately).
What RAID controllers are supported?
Common RAID controllers are the IBM ServeRAID M5014 and M5015, supporting RAID levels 0, 1, 5, and 10 with battery backup option.
Is the server rack-mountable and what are the rail specifications?
Yes, it is a 2U rack server. It fits standard 19-inch racks with a depth of 25.5 inches. Use IBM sliding rails (part numbers vary).
What is the default administrator password for the BIOS?
The default BIOS administrator password is typically PASSW0RD (with a zero). It should be changed for security.
How do I update the firmware on the x3630 M3?
Firmware updates can be performed via the IBM UpdateXpress tool or through the IMM web interface. Bootable ISO images are available from IBM support.
Where can I find spare parts like fans or power supplies?
Spare parts are available through IBM authorized resellers or directly from IBM parts center. Use the server's serial number to identify correct parts.
User questions about eServer System x3630 M3 IBM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual eServer System x3630 M3 - IBM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. eServer System x3630 M3 by IBM.